Hardware

Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.

  • V2.6C

    Solar Guitars V2.6C G2, Electric Guitar, Body: Mahogany, Neck: Maple, Fingerboard: Rosewood, Neck profile: C, 24 Super Jumbo frets, Nut: PPS, Nut width: 43 mm, Scale: 647 mm, Pickups: 2 Seymour Duncan Solar humbuckers, Machine heads: Solar with 18:1 gear ratio, Colour: Carbon Black Matte, Includes gig bag

  • V2.6Canibalismo+

    Solar Guitars V2.6Canibalismo+, Electric Guitar, Sungkai body, Neck: Maple, Fingerboard: Ebony, Neck profile: C, Nut: Graphite, Scale: 648 mm, Nut width: 43 mm, 24 Super Jumbo frets, Pickups: 2 Duncan Solar+ humbuckers, Machine heads: Solar 18:1, Solar Tune-O-Matic bridge with string guide through the body, Colour: Blood Red Open Pore W Blood Splatter

  • V2.6FBB Baritone Flame Black

    Solar Guitars V2.6FBB Baritone Flame Black, Baritone Electric Guitar, Body: Mahogany, Top: flamed maple veneer, Neck: Maple, Fingerboard: Ebony, Neck shape: C, Fretboard radius: 350 mm, Fingerboard inlays: Solar logo at 12th fret, Graphite nut, Nut width: 43 mm, Scale: 673 mm, 24 Super Jumbo frets, Pickups: 2 Seymour Duncan Solar humbuckers, 1 Volume control, Tone control with push/pull function for coil split, 3-Way switch, Tune-O-Matic bridge with string-thru-body, Machine heads: Solar 18:1, Colour: Flame Black Burst Matte, Includes gig bag

  • V21 Echoman

    XVive V21 Echoman, Effect pedal for electric guitar, Delay, Analogue operation, XVive Chip Design (MN 3005 BBS), Up to 600 ms delay time, True bypass, Controls for Time, Blend, Feedback and Modulation, Chorus / Vibrato tactile switch, Bypass footswitch, Status LED, Metal housing, Input and output: 6.3 mm mono jack, Power supply via 9 V DC power supply, 2.1 x 5.5 mm coaxial connector, polarity (-) inside (not included), Dimensions (L x W x H): 95 x 45 x 45 mm, Weight: 250 g@+*Note:* Battery operation not supported@+@+*Note:* Register your product at https://shop.warwick.de/en/warrantyregistration and extend the warranty to 4 years.

  • V212C

    Vox V212C is an electric guitar amplifier.

  • V2359j amp4ribbon

    Roger Schult W2359j amp4ribbon, 1-Channel Ribbon Microphone Preamplifier, Construction: 500 module format, requires a 500 module slot, Continuously adjustable pre-amplification from 26 dB to 59 dB, Switchable attenuation 15 dB can be activated via push button (opt. -20 dB pad), Impedance control 150 Ohm to 22 kOhm, Bass equalisation / high-pass filter 0 to -17 dB control range at 20 Hz, Midrange equalisation 155 Hz - 3.5 kHz, +/- 10 dB, Quality of midrange equalisation, 0.4 and 0.7 fixed and 2.4 - 4 adjustable, Treble equalisation by Baxandall tone control +/- 12 dB at 9 kHz, Bypass function, +48 V phantom power switchable

  • V256 Vocoder

    Electro Harmonix V256 Vocoder, Vocoder, With Reflex-Tune Vocoder Pedal, 9 Programmable memory slots, Vocoder Band adjustable from 8-256 bands, Gender Bender for male or female voices, Reflex Tune for articulate vocal pitch correction, 3 Robotic voices and single, major and minor drones, all with pitch control, Transposition for pitch shifting, Control for Blend - Bands - Tone - Gender Bender - Pitch - Mode, Switch for MIC Bypass - Preset, Mini switch for Mic Gain Lo-Hi, Jack instrument inputs - XLR microphone input, Dimensions (WxDxH): 120 x 145 x 64 mm, Incl. power supply

  • V3

    SE Electronics V3, Vocal microphone, Dynamic, Cardioid, Integrated pop filter, Robust microphone mesh grille from spring steel, Integrated shock mount, Gold XLR connector, Frequency range: 50-16,000 Hz, Output impedance: 600 Ohm, Sensitivity: 2.5 mV / Pa (-52 dB), Dimensions: 52 x 181 mm, Weight: 295 g, Incl. microphone clip, integrated windscreen (black), carrying pouch and threaded adapter

  • V3

    Zoom V3, Vocal Processor, 16 Creative effects for voice processing such as Harmony, Vocoder, Robot, Telephone, Beat Box or Talk Box, Selectable key for the effects Harmony, Talk Box, Vocoder and Pitch Correct, Up to 5 effects can be used at the same time, Additional effects: compressor, delay and reverb - each with intensity control, Enhance function for automatic optimization of the microphone signal, Integrated USB 2.0 audio interface with 16/24/32 bit and 44.1kHz (2 In / 2 Out), Microphone input: XLR (+ 48V phantom power switchable), Pedal input: 6.3 mm jack, Aux input: 3.5 mm stereo jack, Micro USB-B port, Headphone output: 3.5 mm stereo jack, Stereo line output: 2x 6.3 mm jack, Operation via batteries (4 AA Mignon) or optional Zoom AD-16 power pack (Art.#105835#, not included), Dimensions (W x D x H): 190 x 150 x 50 mm, Weight: 590 g, Includes instruction manual

  • V3 4 New Gen Antique White

    Marcus Miller V3 4 New Gen Antique White, Electric Bass, Body: Mahogany, Bolt-on neck: Maple, Fingerboard with rolled edge: Rosewood, White pearl dot fingerboard inlays, Neck profile: "C", Fingerboard radius: 241 mm (9.5"), Scale length: 864 mm (34"), Nut width: 38 mm (1.5"), Bone nut, 20 medium frets, Pickups: 2 Marcus Standard J-Revolution Single Coils (neck and bridge), Electronics: Sire Standard 2-Band Preamp, Controls: Volume/Tone, Blend, Treble, Bass, 3-ply black pickguard, Marcus Standard bass bridge, Open-gear Standard machine heads, Chrome hardware, Colour: Antique White

  • V3 4 New Gen Antique White LH

    Marcus Miller V3 4 New Gen Antique White LH, Electric Bass, Left-handed model, Body: Mahogany, Bolt-on neck: Maple, Fingerboard with rolled edge: Rosewood, White pearl dot fingerboard inlays, Neck profile: "C", Fingerboard radius: 241 mm (9.5"), Scale length: 864 mm (34"), Nut width: 38 mm (1.5"), Bone nut, 20 medium frets, Pickups: 2 Marcus Standard J-Revolution Single Coils (neck and bridge), Electronics: Sire Standard 2-Band Preamp, Controls: Volume/Tone, Blend, Treble, Bass, 3-ply black pickguard, Marcus Standard bass bridge, Open standard machine heads, Chrome hardware, Colour: Antique White

  • V3 4 New Gen Midnight Blueburs

    Marcus Miller V3 4 New Gen Midnight Blueburs, Electric Bass, Body: Mahogany, Bolt-on neck: Maple, Fingerboard with rolled edge: Rosewood, White pearl dot fingerboard inlays, Neck profile: "C", Fingerboard radius: 241 mm (9.5"), Scale length: 864 mm (34"), Nut width: 38 mm (1.5"), Bone nut, 20 medium frets, Pickups: 2 Marcus Standard J-Revolution Single Coils (neck and bridge), Electronics: Sire Standard 2-Band Preamp, Controls: Volume/Tone, Blend, Treble, Bass, 3-ply black pickguard, Marcus Standard bass bridge, Open-gear Standard machine heads, Chrome hardware, Colour: Midnight Blueburst

  • V3 4 New Gen Tobacco Sunburst

    Marcus Miller V3 4 New Gen Tobacco Sunburst, Electric Bass, Body: Mahogany, Bolt-on neck: Maple, Fingerboard with rolled edge: Rosewood, White pearl dot fingerboard inlays, Neck profile: "C", Fingerboard radius: 241 mm (9.5"), Scale: 864 mm (34"), Nut width: 38 mm (1.5'), Bone nut, 20 medium frets, Pickups: 2 Marcus Standard J-Revolution Single Coils (neck and bridge), Electronics: Sire Standard 2-Band Preamp, Controls: Volume/Tone, Blend, Treble, Bass, 3-ply black pickguard, Marcus Standard bass bridge, Open-gear Standard machine heads, Chrome hardware, Colour: Tobacco Sunburst

  • V3 5 New Gen Antique White

    Marcus Miller V3 5 New Gen Antique White, 5-String Electric Bass, Body: Mahogany, Bolt-on neck: Maple, Fingerboard with rolled edge: Rosewood, White pearl dot fingerboard inlays, Neck profile: "C", Fingerboard radius: 241 mm (9.5"), Scale length: 864 mm (34"), Nut width: 46 mm (1.81"), Bone nut, 20 medium frets, Pickups: 2 Marcus Standard J-Revolution Single Coils (neck and bridge), Electronics: Sire Standard 2-Band Preamp, Controls: Volume/Tone, Blend, Treble, Bass, 3-ply black pickguard, Marcus Standard bass bridge, Open-gear Standard machine heads, Chrome hardware, Colour: Antique White

  • V3 5 New Gen Midnight Blueburs

    Marcus Miller V3 5 New Gen Midnight Blueburs, 5-String Electric Bass, Body: Mahogany, Bolt-on neck: Maple, Fingerboard with rolled edge: Rosewood, White pearl dot fingerboard inlays, Neck profile: "C", Fingerboard radius: 241 mm (9.5"), Scale length: 864 mm (34"), Nut width: 46 mm (1.81"), Bone nut, 20 medium frets, Pickups: 2 Marcus Standard J-Revolution Single Coils (neck and bridge), Electronics: Sire Standard 2-Band Preamp, Controls: Volume/Tone, Blend, Treble, Bass, 3-ply black pickguard, Marcus Standard bass bridge, Open-gear Standard machine heads, Chrome hardware, Colour: Midnight Blueburst

  • V3 5 New Gen Tobacco Sunburst

    Marcus Miller V3 5 New Gen Tobacco Sunburst, 5-String Electric Bass, Body: Mahogany, Bolt-on neck: Maple, Fingerboard with rolled edge: Rosewood, White pearl dot fingerboard inlays, Neck profile: "C", Fingerboard radius: 241 mm (9.5"), Scale: 864 mm (34"), Nut width: 45 mm (1.81"), Bone nut, 20 medium frets, Pickups: 2 Marcus Standard J-Revolution Single Coils (neck and bridge), Electronics: Sire Standard 2-Band Preamp, Controls: Volume/Tone, Blend, Treble, Bass, 3-ply black pickguard, Marcus Standard bass bridge, Open-gear Stndard machine heads, Chrome hardware, Colour: Tobacco Sunburst

  • V3 5 New Gen TS LH

    Marcus Miller V3 5 New Gen TS LH, 5-String Electric Bass, Left-handed model, Body: Mahogany, Bolt-on neck: Maple, Fingerboard with rolled edge: Rosewood, White pearl dot fingerboard inlays, Neck profile: "C", Fingerboard radius: 241 mm (9.5"), Scale length: 864 mm (34"), Nut width: 46 mm (1.81"), Bone nut, 20 medium frets, Pickups: 2 Marcus Standard J-Revolution Single Coils (neck and bridge), Electronics: Sire Standard 2-Band Preamp, Controls: Volume/Tone, Blend, Treble, Bass, 3-ply black pickguard, Marcus Standard bass bridge, Open-gear Standard machine heads, Chrome hardware, Colour: Tobacco Sunburst

  • V3 5 TS 2nd Gen

    Marcus Miller V3 5 TS 2nd Gen, 5-String Electric Bass, Body: Mahogany (Toona sureni), Neck: Maple, Fretboard: Rosewood (Dalbergia latifolia), Neck profile: C, Frets: 20 Medium small, Scale: 864 mm, Nut width: 45 mm, Pickups: 2 Marcus Standard Jazz Bass J-Revolution single coils, Marcus Heritage-3 electronics with frequency control, Controls: Volume/Tone (dual pot) - Pickup Blender - Treble - Middle/Middle Frequency (dual pot) - Bass, Active/Passive mini switch, Colour: Tobacco Sunburst, Made by Sire

  • V3 AWH 2nd Gen

    Marcus Miller V3 AWH 2nd Gen, Electric Bass, Body: Mahogany (Toona sureni), Neck: Maple, Fretboard: Rosewood (Dalbergia latifolia), Neck profile: C, Scale: 864 mm, Nut width: 38 mm, 20 Medium Small Frets, Pickups: 2 Marcus Standard Jazz Bass J-Revolution single coils, Marcus Heritage-3 Electronics with Frequency Control, Controls: Volume/Tone (dual pot), pickup blender, treble, middle / middle frequency (dual pot), bass, Active / Passive mini toggle switch, Colour: Antique white, Made by Sire

  • V3 ORG 2nd Gen

    Marcus Miller V3 ORG 2nd Gen, Electric Bass, Mahogany body, Neck: Maple, Rosewood fingerboard, Neck profile: C, Scale: 864 mm, Nut width: 38 mm, 20 Medium small frets, Pickups: 2 Marcus Standard Jazz Bass J-Revolution single coils, Marcus Heritage-3 electronics with frequency control, Control: Volume/Tone (Dual Pot), Pickup Blender, Treble, Middle/Middle Frequency (Dual Pot), Bass, Mini-switch for active/passive mode, Colour: Orange, Made by Sire