Hardware

Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.

  • Solaris Performance

    Kühnl & Hoyer Slokar Performance, Bb Tenor Trombone, "Slokar Performance", Gold brass bell Ø 220 mm, Nickel silver slides (245 g), Clear lacquer, Bore: 13.9 mm, Incl. 6.4 M mouthpiece

  • Solid Spruce Travel Baritone

    Kala Solid Spruce Travel Baritone, Baritone Ukulele, Travel Line with thin body, Top: Solid Spruce, Back and Sides: Mahogany, Black binding, Mahogany neck, Fingerboard: Rosewood, Nut and saddle: Graph Tech NuBone, 18 Nickel silver frets, Scale: 513 mm, Total length: 768 mm, Open, chrome-plated machine heads with black button, Strings: Aquila Super Nylgut, Silk-matte finish, Colour: Natural, Includes custom deluxe gig bag

  • Solid State Rectifier

    TAD Solid State Rectifier, Rectifier Tube, Replaces 5U4G, GB, 5AR4, Y3 rectifier tubes by diode rectification, Sound is a little harder (more aggressive)

  • Solid Studio MKII

    Nux Solid Studio MKII, Effect Pedal for Electric Guitar, Preamp, amp simulator & IR loader, Stereo CYBER IR Engine with double resolution of 1024 samples, Independent preamp and power amp simulation with TSAC-4K white box amp modelling algorithm, Eight classic amp models, One-piece die-cast aluminium housing, AMP, IR, EQ, AMB effect blocks with free routing order, 2.86" colour LCD display (960 x 376) with intuitive operation, 128 preset memory locations, Independent L/R 60 IR memory slots, Built-in noise gate, EQ, Phones Level, Aux In Level, Out Level in the global settings, Normal & Inject input modes, USB audio interface, Firmware update, Solid Studio Editor editing software, USB-C MIDI, Through socket, Balanced 6.3 mm jack stereo outputs with GND lift, Phones out, Dynamic range: 110 dB, Ultra-low latency: 0.85 ms (bypass), 1.9 ms (effect activated), Input impedance: 1 MO, AUX in impedance: 10 kO, Output impedance 1/2: 100 O, Sampling rate: 48 kHz / 32-bit, Power supply: 9V DC, Power consumption: < 600 mA, Dimensions: 105 x 115 x 58 mm, Weight: 450 g

  • Solidcom C1 Pro HUB-4S

    Hollyland Solidcom C1 Pro HUB-4S, Wireless Intercom System, Consists of 1x hub station, 4x remote headsets, 1x wired headset and 1x charging station, Full-Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 350 metres, Headphones: Circumaural, Frequency response: 150 - 7 Hz, Signal-to-noise ratio: > 71 dB, Active noise cancellation: 20 dB, Distortion: < 1%, RF sensitivity: -90 dBm, Microphone type: Electret, Push-To-Talk function, Wind noise removal, Max. sound pressure level: 94 dB SPL, Latency: < 35 ms, Approximately 10 hours of operation and 2.5 hours of charging time, Includes 5x leather ear cushions, 5x foam ear cushions, 8x batteries, 5x windshields, 2x antennas, 1x USB-C cable and 1x storage case

  • Solidcom C1 Pro HUB-8S

    Hollyland Solidcom C1 Pro HUB-8S, Wireless Intercom System*consisting of:*@+@+, 1 x HUB station, 8 x Remote headset, 1 x Wired headset, 1 x Charging station, 9 x Ear leather covers, 9 x Ear foam pads, 16 x Batteries, 9 x Windscreen, 4 x Antenna, 1 x USB-C cable, 1 x Headset sticker set, 1 x Carrying case, Full Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 350 m, Headphones circumaural, Frequency range: 150 - 7000 Hz, Signal-to-noise ratio: 71 dB, Active noise reduction: 20 dB, Distortion: < 1%, RF sensitivity: -90 dBm, Electret microphone, Push-to-talk function, Wind-noise-removal, Max. sound pressure level: 94 dB SPL, Latency: < 35 ms, Approx. 10 hours running time and 2.5 hours charging time

  • Solidcom C1 Pro Master Headset

    Hollyland Solidcom C1 Pro Master Headset, Wireless Single-Ear Hearing-Speaking Combination, Suitable for the Solidcom C1 series, Full-Duplex Mode (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 350 m, Frequency range: 150 - 7000 Hz, Signal-to-noise ratio: 71 dB, Active noise suppression: 20 dB, Distortion: < 1%, RF sensitivity: -90 dBm, Electret microphone, Push-to-talk function, Wind Noise Removal, Limiting sound pressure level: 94 dB SPL, Latency: < 35 ms, Approx. 5 hours running time and 2.5 hours charging time, Weight: 170 g

  • Solidcom C1 Pro Remote Headset

    Hollyland Solidcom C1 Pro Remote Headset, Wireless Single-Ear Hearing-Speaking Combination, Suitable for the Solidcom C1 series, Full-Duplex Mode (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 350 m, Frequency range: 150 - 7000 Hz, Signal-to-noise ratio: 71 dB, Active noise suppression: 20 dB, Distortion: < 1%, RF sensitivity: -90 dBm, Electret microphone, Push-to-talk function, Wind Noise Removal, Limiting sound pressure level: 94 dB SPL, Latency: < 35 ms, Approx. 10 hours running time and 2.5 hours charging time, Weight: 170 g

  • Solidcom C1 Pro RoamingHub 10S

    Hollyland Solidcom C1 Pro RoamingHub 10S, Digital Wireless Intercom System, Set consists of a Solidcom Roaming Hub and ten wireless single-ear remote headsets, DECT 6.0 support, Transmission frequency: 1880–1930 MHz, Range: 500 m, Transmission power: max. 21 dBm, Bandwidth: 1.728 MHz, Modulation: GFSK, Frequency response: 100 Hz – 7 kHz (±3 dB), RF sensitivity: -90 dBm, SNR: >55 dB, Antenna system: Omnidirectional fibre optic antennas, Antenna gain: 4 dBi, App control via integrated Bluetooth module, Hub connections: 2x LAN (RJ45), 1x USB-A, 1x USB-C, 1x DC In, 1x 4WIRE, Compatibility: Solidcom C1 and C1 Pro, Headset battery life: approx. 10 hours (2.5 hours charging time), Dual-Mic Environmental Noise Cancellation (ENC) technology, Electret microphone, Push-to-talk function, Wind noise removal, Maximum sound pressure level: 94 dB, Latency: < 35 ms, Hub dimensions (W x H x D): 302 x 182 x 64 mm, Weight: 1.8 kg (hub), 170 g (per headset), Colour: Grey@+*Set consists of:*, 1x Solidcom Roaming Hub, 4x Solidcom Roaming Hub Antenna, 1x G-mount battery plate, 10x Solidcom C1 Pro wireless single-ear remote headset, 20x Solidcom C1 Pro battery, 1x Solidcom C1 Pro 8-slot charging case, 10x Solidcom C1 Pro over-ear earmuffs, 10x Solidcom C1 Pro on-ear ear muffs, 10x Solidcom headset ear pads, 10x Solidcom C1 Pro microphone cushion, 1x Solidcom headset sticker, 1x 12V/2A DC2.1 power supply unit, 1x USB type-C cable, 1x Solidcom C1 Pro Roaming Hub10S hard-shell carrying case, 1x User manual, 1x Warranty card

  • Solidcom C1 Pro RoamingHub 20S

    Hollyland Solidcom C1 Pro RoamingHub 20S, Digital Wireless Intercom System, Set consists of a Solidcom Roaming Hub and twenty wireless single-ear remote headsets, DECT 6.0 support, Transmission frequency: 1880–1930 MHz, Range: 500 m, Transmission power: max. 21 dBm, Bandwidth: 1.728 MHz, Modulation: GFSK, Frequency response: 100 Hz – 7 kHz (±3 dB), RF sensitivity: -90 dBm, SNR: >55 dB, Antenna system: Omnidirectional fibre optic antennas, Antenna gain: 4 dBi, App control via integrated Bluetooth module, Hub connections: 2x LAN (RJ45), 1x USB-A, 1x USB-C, 1x DC In, 1x 4WIRE, Compatibility: Solidcom C1 and C1 Pro, Headset battery life: approx. 10 hours (2.5 hours charging time), Dual-Mic Environmental Noise Cancellation (ENC) technology, Electret microphone, Push-to-talk function, Wind noise removal, Max. sound pressure level: 94 dB SPL, Latency: < 35 ms, Hub dimensions (W x H x D): 302 x 182 x 64 mm, Hub weight: 1.8 kg, Weight per headset: 170 g, Colour: Grey@+*Set consists of:*, 1x Solidcom Roaming Hub, 4x Solidcom Roaming Hub Antenna, 1x G-mount battery plate, 20x Solidcom C1 Pro wireless single-ear remote headset, 40x Solidcom C1 Pro battery, 3x Solidcom C1 Pro 8-slot charging case, 20x Solidcom C1 Pro over-ear earmuffs, 20x Solidcom C1 Pro on-ear ear muffs, 20x Solidcom headset ear pads, 20x Solidcom C1 Pro microphone cushion, 1x Solidcom headset sticker, 3x 12V/2A DC2.1 power supply unit, 1x USB type-C cable, 1x Solidcom C1 Pro Roaming Hub20S hard-shell carrying case, 1x User manual, 1x Warranty card

  • Solidcom C1 Pro Wired Headset

    Hollyland Solidcom C1 Pro Wired Headset, Single-Ear Intercom Headphones, Suitable for the Solidcom C1 series, Maximum level: 94 dB, Microphone type: Electret, Connection: 8-pin Lemo, Weight: 190 g

  • Solidcom C1 Pro-4S

    Hollyland Solidcom C1 Pro-4S, Wireless Intercom System, Full-Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 350 metres, Headphones: Circumaural, Frequency response: 150 - 7 Hz, Signal-to-noise ratio: > 71 dB, Active noise cancellation: 20 dB, Distortion: < 1%, RF sensitivity: -90 dBm, Microphone type: Electret, Push-To-Talk function, Wind noise removal, Max. sound pressure level: 94 dB SPL, Latency: < 35 ms, Approximately 10 hours of operation and 2.5 hours of charging time@+*Set consists of:*, 1x master headset, 3x remote headsets, 1x charging station, 4x leather ear covers, 4x ear foam pads, 8x batteries, 4x windshields, 1x USB-C cable, DC adapter

  • Solidcom C1 Pro-8S

    Hollyland Solidcom C1 Pro-8S, Wireless Intercom System, Full-Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 350 metres, Headphones: Circumaural, Frequency response: 150 Hz - 7 kHz, Signal-to-noise ratio: 71 dB, Active noise cancellation: 20 dB, Distortion: < 1%, RF sensitivity: -90 dBm, Microphone type: Electret, Push-To-Talk function, Wind noise removal, Max. sound pressure level: 94 dB SPL, Latency < 35 ms, Approximately ten hours of operation and 2.5 hours of charging time@+*Set consisting of:*, 1x master headset, 7x remote headsets, 1x charging station, 8x leather ear covers, 8x ear foam pads, 16x batteries, 1x 8-slot battery charging station, 8x windshields, 1x USB-C cable, 1x DC adapter

  • Solidcom C1Pro-3S

    Hollyland Solidcom C1Pro-3S, Wireless Intercom System, Consists of 3x remote headsets and 1x charging station, Full-Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 350 m, Headphones: Circumaural, Frequency response: 150 - 7 Hz, Signal-to-noise ratio: > 71 dB, Active noise cancellation: 20 dB, Distortion: < 1%, RF sensitivity: -90 dBm, Microphone type: Electret, Push-To-Talk function, Wind noise removal, Max. sound pressure level: 94 dB SPL, Latency: < 35 ms, Approximately 10 hours of operation and 2.5 hours of charging time, Includes 3x leather ear covers, 3x foam ear pads, 6x batteries, 3x windshields and 1x USB-C cable

  • Solidcom M1-4B

    Hollyland Solidcom M1-4B, Wireless Intercom System, Full-Duplex (FDX), The beltpacks can be grouped into up to three groups, Simultaneous group calls possible for up to 16 people in three groups with two cascaded sets, Transmission frequency: 1.9 GHz, Bandwidth: 1728 MHz, Transmission power: max. 21 dBm, Range: 450 m, Headphones: Circumaural, Frequency range: 200 - 7000 Hz, Signal-to-noise ratio: > 50 dB, Distortion: < 1%, RF sensitivity: -93 dBm, Modulation: GFSK, Integrated panel antenna in the base station, Integrated HD-LCD in the beltpack, Integrated fastening clip with lanyard loop on the belt pack, Integrated 3.5 mm connector for using headsets on the beltpack, 2 Removable lithium-ion batteries in each beltpack with 6 hours runtime and 2.5 hours charging time per battery, Base station dimensions (W x H x D): 181 x 256 x 49 mm, Base station weight: 1560 g, Dimensions per beltpack (W x H x D): 65 x 105 x 23 mm, Weight per beltpack: 200 g, Colour: Grey@+*Consists of:*, 1x Basis-Station, 4x Beltpack, 4x LEMO One-Ear Headset, 1x Charging station, 2x Omnidirectional 1.9 GHz antenna, 1x Adapter cable USB-A to USB-C, 1x PoE Adapter, 1x RJ45 to XLR cable 5m, 1x 4-pin XLR adapter, 8x Batteries for beltpack, 1x 3/8" Installation material, 1x Transport case

  • Solidcom M1-8B

    Hollyland Solidcom M1-8B, Wireless Intercom System, Full-Duplex (FDX), The beltpacks can be grouped into up to three groups, Simultaneous group calls possible for up to 16 people in three groups with two cascaded sets, Transmission frequency: 1.9 GHz, Bandwidth: 1.728 MHz, Transmission power: Max. 21 dBm, Range: 450 m, Headphones: Circumaural, Frequency range: 200 - 7000 Hz, Signal-to-noise ratio: > 50 dB, Distortion: < 1%, RF sensitivity: -93 dBm, Modulation: GFSK, Integrated panel antenna in the base station, Built-in HD-LCD in the beltpack, Attachment clip with lanyard loop on the belt pack, Built-in 3.5 mm connector for using headsets on the beltpack, Two removable lithium-ion batteries in each beltpack with six hours runtime and 2.5 hours charging time per battery, Base station dimensions (W x H x D): 181 x 256 x 49 mm, Base station weight: 1560 g, Dimensions per beltpack (W x H x D): 65 x 105 x 23 mm, Weight per beltpack: 200 g, Colour: Grey@+*System consisting of:*, 1x basis station, 8x beltpack, 8x LEMO One-Ear Headset, 1x charging station, 2x omnidirectional 1.9 GHz antenna, 1x adapter cable USB-A to USB-C, 1x PoE (power over ethernet) adapter, 1x RJ45 to Ethercon cable, 5m, 1x 4-pin XLR adapter, 16x batteries for beltpack, 1x 3/8" installation material, 1x transport case

  • Solidcom SE Pro 2S

    Hollyland Solidcom SE Pro 2S, Wireless Intercom System, Single-ear design, Full-Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 400 m LOS, Frequency response: 150 Hz–7 kHz ±10 dB, Signal-to-noise ratio: 71 dB ±2 dB at 94 dB SPL, Active noise cancellation: =20 dB, RF sensitivity: <–90 dBm, Microphone type: Electret, Max input SPL: >115 dB SPL, Output SPL: 98 dB SPL, Battery capacity: 770 mAh, Charging time: <3 hours, Weight (without battery): approx. 185.2 g, Colour: Black@+*Set consisting of:*, 1x Solidcom SE Pro Master-Headset, 1x Solidcom SE Pro Remote-Headset, 4x Li-Ion batteries, 1x 6-Slot charging base, 1x USB-A to USB-C cable, 1x Number stickers, 1x User manual, 1x Warranty card

  • Solidcom SE Pro 4S

    Hollyland Solidcom SE Pro 4S, Wireless Intercom System, Consisting of one master headset and three remote headsets, Single-ear design, Full-Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 400 m LOS, Frequency range: 150 - 7,000 Hz ±10 dB, Signal-to-noise ratio: 71 dB ±2 dB at 94 dB SPL, Active noise cancellation: 20 dB, RF sensitivity: <–90 dBm, Microphone type: Electret, Max. input sound pressure level: >115 dB SPL, Output SPL: 98 dB SPL, Battery capacity: 770 mAh, Charging time: Less than three hours, Weight (without battery): Approx. 185.2 g, Colour: Black@+*Delivery contents:*, 1x Solidcom SE Pro Master-Headset, 3x Solidcom SE Pro Remote-Headset, 8x Li-Ion batteries, 1x 6-slot charging base, 1x USB-A to USB-C cable, 1x number stickers

  • Solidcom SE Pro 5S

    Hollyland Solidcom SE Pro 5S, Wireless Intercom System, Single-ear design, Full-Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 400 m LOS, Frequency response: 150 Hz–7 kHz ±10 dB, Signal-to-noise ratio: 71 dB ±2 dB at 94 dB SPL, Active noise cancellation: =20 dB, RF sensitivity: <–90 dBm, Microphone type: Electret, Max input SPL: >115 dB SPL, Output SPL: 98 dB SPL, Battery capacity: 770 mAh, Charging time: <3 hours, Weight (without battery): approx. 185.2 g, Colour: Black@+*Set consists of:*, 1x Solidcom SE Pro Master-Headset, 4x Solidcom SE Pro Remote-Headset, 10x Li-Ion batteries, 1x 6-Slot charging base, 1x USB-A to USB-C cable, 1x Number stickers, 1x User manual, 1x Warranty card

  • Solidcom SE Pro 6S

    Hollyland Solidcom SE Pro 6S, Wireless Intercom System, Single-ear design, Full-Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 400 m LOS, Frequency response: 150 Hz–7 kHz ±10 dB, Signal-to-noise ratio: 71 dB ±2 dB at 94 dB SPL, Active noise cancellation: 20 dB, RF sensitivity: <–90 dBm, Microphone type: Electret, Max input SPL: >115 dB SPL, Output SPL: 98 dB SPL, Battery capacity: 770 mAh, Charging time: <3 hours, Weight (without battery): approx. 185.2 g, Colour: Black@+*Set consists of:*, 1x Solidcom SE Pro Master-Headset, 5x Solidcom SE Pro Remote-Headset, 12x Li-Ion batteries, 1x 8-Slot charging base, 1x USB-A to USB-C cable, 1x Number stickers, 1x User manual, 1x Warranty card

  • Solidcom SE Pro 9S

    Hollyland Solidcom SE Pro 9S, Wireless Intercom System, Single-ear deisgn, Full-Duplex (FDX), Dual-Mic Environmental Noise Cancellation (ENC) technology, DECT 6.0 support, Transmission frequency: 1.9 GHz, Range: 400 m LOS, Frequency response: 150 Hz–7 kHz ±10 dB, Signal-to-noise ratio: 71 dB ±2 dB at 94 dB SPL, Active noise cancellation: 20 dB, RF sensitivity: <–90 dBm, Microphone type: Electret, Max input SPL: >115 dB SPL, Output SPL: 98 dB SPL, Battery capacity: 770 mAh, Charging time: <3 hours, Weight (without battery): approx. 185.2 g, Colour: Black@+*Set consists of:*, 1x Solidcom SE Pro Master-Headset, 8x Solidcom SE Pro Remote-Headset, 18x Li-Ion batteries, 1x 8-Slot charging base, 1x USB-A to USB-C cable, 1x Number stickers, 1x User manual, 1x Warranty card

  • Solina String Ensemble

    Behringer Solina String Ensemble, Analogue String Ensemble Synthesiser, Authentic reproduction of the original ARP/Eminent Solina SE-II, Multi-orchestral string machine with violin, viola, trumpet + horn (only playable simultaneously), cello and double bass, Cello and double bass monophonic, Violin, viola, trumpet and horn parts fully polyphonic (octave division), BBD chorus for ensemble effects, Vintage-style small stone phase shifter, Phase shifter can also be used as an effect for external sounds, Colour switch and rate control for fine-tuning effect speed and sound, Can be used as a complete Eurorack synthesiser voice (width: 70 HP), Dimensions: 87 x 374 x 136 mm@+*Connectors:*, 3.5 mm jack gate output, Trig output, Mod input, Mod output, Phaser input, Phaser output, VCA CV input and stereo audio output, MIDI In/Thru and USB-MIDI, 6.3 mm jack output

  • Solis Ventus Reverb & Delay

    GFI System Solis Ventus Reverb & Delay, Effect Pedal for Electric Guitar, Dual-engine delay and reverb, Can execute two algorithms simultaneously, with any pairing, sequence and routing, Reverb + Reverb, Delay + Delay or Delay + Reverb - in any order, 15 delays, 9 reverbs, 96 presets, 40 second stereo looper, Post FX dynamics processing engines enable independent dynamic effects (ducking or gating), 2 expression pedal inputs with CV compatibility and up to 3 external switches for additional control (bank up/down, tap tempo etc.), OLED display with high contrast, Controls: Param A & B, Time A & B, Algo A & B, Footswitch: Power, A/Y, B/X, C/TAP, LED: A/Y, B/X, C/TAP, Inputs L (mono) & R: 2 x 6.3 mm jack, Outputs L (mono) & R: 2 x 6.3 mm jack, Aux switch/expression pedal: 6.3 mm stereo jack, Expression pedal 2: 3.5 mm stereo mini jack, MIDI In & Thru/Clock: 2 x 6.3 mm jack, Current consumption: 350 mA, Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector, centre negative) - suitable mains adapter available under Art. #409939# (not included in the scope of delivery), Dimensions (W x D): 170 x 120 mm@+*Note:* No battery operation supported.

  • Solista Tenor Sax

    Rampone & Cazzani Solista Tenor Sax, Tenor Saxophone, Large bore, Body and S-bow made of copper, Brass keys, Gold-plated body, S-bow and keys, Hand-hammered S-bow, body and bell, Calibrated S-bow for reduced blowing resistance, Bb - C# key guard and octave key S-bow copper-plated, Smooth running, modern key system, Hand engraved, Includes case, mouthpiece and accessories, Handmade in Italy