Hardware

Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.

  • SansAmp Marty Friedman

    Tech 21 SansAmp Marty Friedman, Effect Pedal for Electric Guitar, Marty Friedman Signature model, Preamp with Marty's signature sounds - clean, dirty and lead, Two modes: Performance and Live, 128 presets, Chromatic tuner, Effects loop, Controls: Drive, Low, Mid, High, Reverb, Level, Gate, Filter, Push buttons: Filter/Tuner, Preset, Footswitch: Effect Bypass, LED: Effect on, Display: Tuner, Inputs: 6.3 mm jack, MIDI, Outputs: 6.3 mm jack, XLR balanced, Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector, centre negative), Dimensions (W x D x H): 190.5 x 133.35 x 50.8 mm, Includes power supply@+*Note:* Battery operation is not supported.

  • SansAmp MIDI Mouse

    Tech 21 SansAmp MIDI Mouse, MIDI Switch@+The MIDI mouse from TECH-21 is quickly explained. A small Midi switcher in pocket format. On the front, there is an Up/Down button, an Activ/Search button and a large LED display that is easy to read even on the darkest stage. The target preset can be selected without cutting the active programme. Only pressing the Active/Search button activates the new programme. The Midi Mouse can be powered either by an external power supply unit, by phantom power via a Midi cable or by a 9V battery. If the Midi Mouse is battery-powered, the display goes into "sleep" mode after a longer period of non-use to avoid unnecessary battery drain. The slightest press of one of the three switches immediately puts the display back into operation.@+, With up/down button, Easy handling, Battery operation possible

  • SansAmp Paradriver D.I. 20th

    Tech 21 SansAmp Paradriver D.I. 20th, Universal Preamp, 20th Anniversary edition, Multi-instrument preamp for acoustic, electric or bass guitar, double bass, mandolin or any other instrument equipped with a pickup system, Pedal version of the RPM, Controls: Level, Treble, Mid, Bass, Drive, Blend & Mid Shift, Switches for: Phantom & Ground Connect XLR, +10 dB 6.3 mm jack, -20 dB XLR, Rumble Filter & Air, One jack input, One jack output, One jack output (parallel), One XLR out, Dimensions: 120 x 95 x 50 mm, Weight: 340 g, Suitable power supply: Art. #409939# (not included)

  • SansAmp Paradriver D.I. V2

    Tech 21 SansAmp Paradriver D.I. V2, Preamp Pedal, Pedal version of RPM, a multi-instrument preamp for acoustic, E or bass guitar, bass, mandolin and any other instrument equipped with a pickup, Controls: Level, Treble, Mid, Bass, Drive, Blend & Mid Shift, Switch for: Phantom & Ground Connect XLR, +10 dB 1/4 "Jack (TRS), 20db XLR, Rumble Filter & Air, 1 Jack output, 1 Jack output, 1 Jack output (parallel), 1 XLR output, Dimensions: 120 x 95 x 50 mm, Weight: 340 g, Compatible mains adaptor: article no. #409939# (not included)

  • SansAmp Prog Bass Driver Elite

    Tech 21 SansAmp Prog Bass Driver Elite, Effect Pedal for Electric Bass, Versatile as a stompbox with amp, preamp for power amp, directly into the mixer or for recording, Chromatic tuner, Effect loop, MIDI interface, Input: 6.3 mm jack (1 MOhm), Output with level selector: 6.3 mm jack (low impedance), Output with Ground Lift: XLR, Robust metal housing, Silent switching with metal footswitches, Suitable MIDI cable set sold separately (not included), Dimensions: 190 x 133 x 51 mm, Weight: Approx. 680 g, Includes 9 V DC universal power supply (100–240 V, 200 mA) with international adapter sets, Made in USA

  • SansAmp RBI

    Tech 21 SansAmp RBI, Rack Preamp, Extended rack version of the Bass Driver D.I., Drive adjusts the overall amount of gain and overdrive, Presence brings out the upper harmonic part and attack, Blend allows users to mix the direct instrument signal with the SansAmp tube amp emulation, Active bass and treble controls reduce or boost ±12 dB, Dedicated midrange control with ±12 dB cut or boost, Individual level control for the XLR output to optimise the amplifier output in relation to the PA system, Parallel/serial switchable effects loop, Mix 50/50 switch to configure the effects loop in series or parallel, Rear input, XLR output with switchable level, Buffered XLR output for the unprocessed signal to split the signal before the Sansamp, Footswitch input for bypass, Footswitch output for chaining and switching between another SansAmp RBI, Format: 19" / 1U

  • SansAmp SH1 Steve Harris

    Tech 21 SansAmp SH1 Steve Harris, Preamp for Electric Bass, Steve Harris (Iron Maiden) Signature pedal, TWo channel modes with independent gain and volume controls, Fully analogue SansAmp technology, Active 4-band EQ, ±18 dB Boost or Cut, Built-in chromatic tuner, Built-in speaker simulation, Controls: Two Volume, Blend, High, Low, Mid 2, Mid 1 Comp, 2x Gain, Switches: XLR, Speaker Simulation, Bite (boost), Footswitch: Channel 1/2, On and Tuner, XLR DI output, Input: 6.3 mm jack with 4.7 MOhm, Output: 6.3 mm jack with low impedance, Sturdy metal housing, metal switch and socket, Dimensions (L x W x H): 19.7 x 6.3 x 3.2 cm, Includes 9 V DC universal power supply #DC9 with automatic switching to 100 V / 240 V, 200 mA

  • SansAmp XB Driver

    Tech 21 SansAmp XB Driver, Amplifier for Electric Bass in Pedal Format, Purely analogue, Two fully independent channels with their own 3-band EQ and parametric mid-range control, Vintage FET compressor in the clean channel, Drive control in the distortion channel with "Bite" switch for more presence, Crossover switch for bi-amp mode with HP filter in the drive channel and LP filter in the clean channel, Line-Level Switch, Ground lift, Footswitch: bypass, channel selection, mix for bi-amp mode, Input: 6.3 mm jack with 10 db pad switch, CabRig outputs: 6.3 mm jack unbalanced, XLR balanced and USB C, FX Send/Return, Tuner output, Dimensions (L x W x H): 191 x 121 x 51 mm, Includes 18 V AC power supply unit

  • Santa Ana Overdrive V2

    Fender Santa Ana Overdrive V2, Effect Pedal for Electric Guitar, JFET-based Class A overdrive, Features an internal 18 V power supply for greater headroom and a tube-like sound, Two distinct overdrive tones offer varying degrees of dynamic clipping, providing a wide range of sound possibilities, The independently switchable 3-band EQ can be placed either before or after the distortion circuit, Contols: Level, Tone, Drive, Treble, Middle, Bass, Switches: Voice, EQ, Buffer, Tight, Multi SW, Input: 6.3 mm jack, Output: 6.3 mm jack, Power supply connection: 5.5 x 2.1 mm barrel connector – centre negative, Power supply with a DC mains adapter (not included), Power consumption: 280 mA, Dimensions (W x D x H): 101.6 x 139.7 x 76.2 mm, Weight: 450 g

  • Santana Retro 10 Top SY

    PRS Santana Retro 10 Top SY, Electric Guitar, Body: Mahogany, 10-Top: Flamed maple, Set-in neck: Mahogany, Fretboard: Rosewood, Bird fretboard inlays, Neck profile: Santana Pre-Factory, Faux bone fretboard binding, Scale length: 622 mm (24.5"), 24 Santana jumbo frets, Pickups: Santana Bass and 58/15 Treble Humbucker, Volume and tone controls, 3-Way toggle switch, PRS Gen III tremolo, PRS Phase III locking machine heads, Nickel hardware, Strings: .010 PRS, Nitrocellulose lacquer, Colour: Santana Yellow, Includes PRS case

  • Santana Retro FW

    PRS Santana Retro FW, Electric Guitar, Body: Mahogany, Top: Flamed maple, Set-in neck: Mahogany, Fingerboard: Rosewood, Bird fingerboard inlays, Neck profile: Santana Retro, Fingerboard binding: Faux bone, Scale length: 625 m (24.594"), 24 frets, Pickups: One Santana Bass and one Santana Treble humbucker, One volume and one tone control, 3-way pickup switch, PRS Gen III tremolo, PRS Phase III locking machine heads, Nickel hardware, Colour: Faded Whale Blue, Includes PRS case

  • Santana Retro FW

    PRS Santana Retro FW, Electric Guitar, Body: Mahogany, Top: Flamed maple, Set-in neck: Mahogany, Fretboard: Rosewood, Fretboard inlays: Birds, Fretboard binding: Faux bone, Neck profile: Santana Pre-Factory, Scale: 622 mm (24.5"), 24 Santana Jumbo frets, Pickup: 1 Santana bass (neck) and 1 58/15 treble (bridge) humbucker, 1 Volume control and 1 tone control, 3-Way toggle switch, PRS Gen III tremolo, PRS Phase III locking machine heads, Hardware: Nickel, Strings: .010 PRS, Serial number: 298239, Nitrocellulose lacquer finish, Colour: Faded whale blue, Weight: 3.72 kg, PRS case included

  • Santos Pavo EX-SS-EA G

    Manuel Rodriguez Santos Pavo EX-SS-EA G, Classical Guitar with Pickup, Size: 4/4, Academy Series, Top: soild spruce, Back and sides: distinctively grained Santos rosewood, Neck: Mahogany, Fingerboard: Ovangkol, Scale: 650 mm, Nut Width: 52 mm, Nut: Bone, Genuine Spanish neck tenon, With armrest, 19 Frets, Pickup: MR by ARTEC SQ-3 preamp with Solid-Flex, Ovangkol bridge with compensated bone saddle, Factory strings: Hannabach 815HTC, Colour: Natural, high-gloss, Made in Europe

  • Sapel

    Frap Tools Sapel, Random Generator for Control Voltages, Consists of a multi-channel noise source and two random sections, Four output noise generator: blue, white, pink and red or brown noise, The random voltage and clock section features four uncorrelated random CV generation paths, divided in; fluctuating random voltage; quantized random voltage with 2n stages tuned in semitones referred to 1V/oct scale; quantized random voltage with n+1 stages tuned in octaves referred to 1V/oct scale; non quantized sample & hold., Additional Random Clock sources per random section, where normal and random clock signals can be triggered individually, Width: 18 HP, Depth: 38 mm, Power requirement: +250 mA (+12 V) / -170 mA (-12 V)

  • Sapphire SM

    La Mancha Sapphire SM, Acoustic Guitar, Size: 4/4, Top: solid German spruce, Back and sides: Pau Ferro, Maple bindings, Neck: Toona Kalantas with carbon reinforcement, Spanish neck-body joint, Fingerboard: Ovangkol, Bridge: Ovangkol with double bore, Scale: 650 mm, Nut width: 52 mm, Bone nut and saddle, Deluxe gold-plated machine heads with black knobs, Original strings: Savarez Cantiga Mixed Tension 510MRJ, Finish: open pore, Colour: Natural Matte

  • Sarajewo

    XAOC Devices Sarajewo, Eurorack module, Synchronisable analogue delay, BBD (bucket brigade) delay with 3 delay taps, Delay time: 20 ms - 1.5 s, Individual outputs for 3 delay taps, Input with level control, Wet/Dry control with CV input, CV input for delay time, Feedback control, Feedback loop input for external processing, Tap Tempo button and sync input for external clock signal, Tone control, Power supply: 180 mA (+12 V) / 120 mA (-12 V), Width: 12 TE

  • SAT 242 G2

    LD Systems SAT 242 G2, Speaker, 2x 4" Woofers, 1" Kapton tweeter, RMS / max. 100/180 W, Frequency range: 75 Hz to 20 KHz, Max. SPL: 108 dB, Impedance: 8 Ohm, Speaker terminals, Dimensions (W x H x D): 140 x 378 x 135 mm, Weight: 4.15 kg, Incl. wall bracket

  • SAT 242 W G2

    LD Systems SAT 242 W G2, Speaker, 2 x 4" Woofer, 1" Kapton tweeter, RMS / max. 100/180 W, Frequency response: 75 Hz to 20 KHz, Max. SPL: 108dB, Impedance: 8 Ohm, Clamp connector, Dimensions: 140 x 378 x 135 mm, Weight: 4.15 kg, Colour: White, Includes wall bracket

  • SAT 262 G2

    LD Systems SAT 262 G2, Passive Multifunctional Speaker, For installation and stage application, Equipped with: 2x 6.5", 1", Dispersion pattern: 80 ° x 60 °, Frequency range: 65 - 19,000 Hz, Maximum output level: 116 dB, Rated power: 180 W/360 W, Impedance: 8 Ohms, Terminal block and speaker twist connection, 12 mm MDF housing, 4x M8, 4x M6 and 2x M10 fly points, Dimensions: 200 x 630 x 205 mm, Weight: 9.8 kg, Colour: Black, Suitable truss and swivel brackets available (not included)

  • SAT 262 G2 W

    LD Systems SAT 262 G2 W, Passive Multi-function Loudspeaker, For installation and stage application, Equipped with: 2x 6.5", 1", Dispersion pattern: 80° x 60°, Frequency range: 65 - 19,000 Hz, Maximum output level: 116 dB, Rated power: 180 W/360 W, Impedance: 8 Ohms, Terminal block and speaker twist connection, 12 mm MDF housing, 4x M8, 2x M6 and 2x M10 rigging points, Dimensions: 200 x 630 x 205 mm, Weight: 9.8 kg, Colour: White, Suitable truss- and swivel brackets available (not included)

  • Sat 3-WH

    Tannoy Sat 3-WH, 2.5" Wall Speaker, Power: 15 W, 25 W (Peak), Max. SPL: 100 dB, Frequency response: 200 - 20,000 Hz (-10 dB), Impedance: 16 ohm, Sensitivity: 83 dB, Dispersion pattern (H x V): 265 x 265 degrees, Dimensions (W x D x H): 100 x 93 x 100 mm (without bracket), Weight: 1.16 kg (with bracket), Colour: White

  • SAT 42 G2 Pair

    LD Systems SAT 42 G2 Pair, Speaker pair, 4" Woofer, 1" Kapton tweeter, RMS / max. 60/100 W, Frequency response: 75 Hz to 20 KHz, Max. SPL: 103 dB, Impedance: 16 ohms, M6 fly points, Dimensions: 140 x 230 x 125 mm, Weight: 2.5kg, Incl. wall bracket, Contents: 1 pair

  • SAT 42 W G2 Pair

    LD Systems SAT 42 W G2 Pair, Passive Full-Range Speakers, 4" Bass, 1" Kapton tweeter, RMS/max. power rating: 80/130 W, Frequency range: 75 - 20,000 Hz, Max SPL: 103 dB, Impedance: 16 Ohm, M6 fly points, Dimensions: 140 x 230 x 125 mm, Weight: 3 kg, Wall mount included, One pair