Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.
Sonifex Redbox RB-ADDA, AD/DA converter, 24 bit / 96 kHz converter, Installation height: 1U, Analog connections: each 2x XLR in/out and RCA for input/output, Adjustable output level: 12 dBu, 18 dBu or 24dBu, Dynamic range over 110 dB, Digital connections per AES/EBU XLR and S/PDIF coax for input/output, Dimensions 48 cm (W) x 10.8 cm (D) x 4.2 cm (H), Weight 1.6 kg
Sonifex Redbox RB-BL2, Unbalanced to Balanced Bi-Directional Converter, For connecting consumer and semi-professional devices to balanced line level systems, 2 x XLR inputs, 2 x RCA inputs, 2 x XLR outputs, 2 x RCA outputs, Dimensions 28 cm (W) x 10.8 cm (D) x 4.2 cm (H), Weight: 1.0 kg
Sonifex Redbox RB-DA6, 6 Channel Stereo / 12-Channel Mono Distribution Amplifier, 2x XLR inputs, Input impedance 20 kOhm, Max. Input level +28 dBu, 12x XLR outputs, Output Impedance 50 Ohm, Max output level +28 dBu, Harmonic distortion less than 0.01%, 19 ", 1U, Dimensions: 48cm (W) x 10.8cm (D) x 4.2cm (H), Weight: 1.3 kg
Sonifex Redbox RB-DA6G, Audio Interface, 6-channel stereo or 12-channel mono distribution amplifier, With level adjuster per output, Housing: 19 ", 1U
Sonifex Redbox RB-DAC1, DA converter, 19 "/ 1U, With adjustable headphone output, SPDIF / AES input, RCA / XLR output
Sonifex Redbox RB-DDA6A, 6x AES / EBU distribution amplifier, Supports resolutions from 16 bit 44.1 kHz to 24 bit, 96 kHz, 1 AES / EBU input XLR, 6 AES / EBU outputs XLR, Dimensions 28 cm (width) x 10.8 cm (depth) x 4.2 cm (height), Weight 0.95 kg
Sonifex Redbox RB-DDA6W, 6-Unit Wordclock Distribution Amplifier, 1 x BNC female input, 6 x BNC female outputs, Input impedance: 75 Ohms, Output impedance: < 50 Ohms, Dimensions (W x D x H): 28 x 10.8 x 4.2 cm, Weight 0.9 kg
Sonifex Redbox RB-HD1, Headphone amplifier, XLR stereo and XLR mono input for talkover function, Level and talkover controllable via remote, 2x headphone outputs (one each on the back and front side), Dimensions: 48 cm (W) x 10.8 cm (D) x 4.2 cm (H), Weight 1.35 kg
Sonifex Redbox RB-HD2, Headphone Amplifier, An XLR stereo or mono input, Two adjustable headphone outputs, Dimensions: 19"
Sonifex Redbox RB-HD6, Headphone Amplifier, The HD6 can distribute a stereo input signal to up to six different headphones, each with its own volume control on the front, Each headphone path has an additional input, If this is used, the corresponding path is disconnected from the master audio signal, The master level can be used to control the common level. A stereo / mono switch adds the left and right outputs for mono operation.
Sonifex Redbox RB-PA2, Dual Phono Preamp, Dual Stereo RIAA phone preamplifier, Professional preamp with balanced XLR outputs, For two stereo record players
Sonifex Redbox RB-PMX4, Preset Zone Mixer, 10 XLR mono inputs, 4 XLR outputs, Channel assignment adjustable via DIP switch, Optimal use for installations etc., Routing adjustable via DIP switch, Frequency response 20 Hz up to 20 kHz, Dimensions: 48 cm (W) x 10.8 cm (D) x 4.2 cm (H), Weight 1.5 kg
Sonifex Redbox RB-SD1, Silent Detector, 2 source inputs to 1 master output, Automatic switching time adjustable from 2 - 30 sec, Remote input for ext. Switching and status messages, Bal. in / out, Format: 19 "/ 1 HE, Optional rackkit RK-3 available for rear mounting (art. #176657#)
Sonifex Redbox RB-SS10, 10-Channel stereo source selector / mixer, Adjustable main- and headphone outputs, Source selection via 10 backlit front buttons or via remote connection, Rack size: 19", 1 U, Inputs: 4x XLR, 2x 25-pin Sub-D connectors for 4 balanced stereo inputs, Outputs: 2x XLR, Cascadable via status outputs and remote inputs, Dimensions: 48 cm (W) x 10.8 cm (D) x 4.2 cm (H), Weight: 1.6 kg
Sonifex Redbox RB-UL4, Quad 2-channel balancer, Change from unbalanced to symmetric, Trimmer level adjustable from -15 dBu to +15 dBu, 8 RCA inputs unbalanced, 8 XLR outputs balanced, Frequency response 20 Hz to 20 kHz, Dimensions 48 cm (W) x 10.8 cm (W) x 4.2 cm (H), Weight: 1.3 kg
Chandler Limited REDD Microphone, Tube large diaphragm microphone, With REDD.47 preamp, Polar pattern: Cardioid and omni, -10 dB pad switch, Phase switchable, Gain switchable (in 3 dB steps from +4 to +33 dB), Incl. microphone shock mount, Mogami connection cable and transport case
Chandler Limited REDD.47, 1-Channel tube microphone preamplifier, Based on the EMI REDD.51 console preamplifier, Tube (EF86, E88CC), +57 dB total gain, Rumble filter, 20dB pad switch, phase switch, + 48V switchable phantom power, Gain 16 to 52 dB (Stepped), Fine gain: +/- 5 dB (variable), Transformer balanced inputs/outputs, Connections: Mic/line balanced XLR input, Hi-Z 6.3 mm jack input in front, XLR line output, Integrated power supply, Model: 19" 2U
Focusrite RedNet A16R MKII, 16-Channel AD / DA converter with Dante interface, 24 Bit / 192 kHz, 119 dB dynamic range, Frequency range: 20 - 20,000 Hz (+/- 0.05 dB), Dante based remote controllable Audio-over-IP functionality, 2 Integrated power supply units for redundant power supply, 2 Network connections for redundant network functionality, Level control for input and output channels, Design: 19"/ 1 U, Dimensions: 482 x 44 x 327 mm, Weight: 4.53 kg@+*Connections:*@+@+, 4 DB-25 Sub-D connections (16x line input, 16x line output), Word clock input and output, AES / EBU input and output, 2 Dante network connections, 2 Connections for power cables
Focusrite RedNet AM2, Dante stereo headphone amplifier and line output interface, With PoE (Power over Ethernet), Headphone / speaker stereo monitoring solution, Independent level controls for headphones and line outputs, Mute switch for line outputs, Integrated Gigabit Ethernet switch, Thread for microphone tripod mounting, Anti-slip feet, 2 Ethernet connections, 2 line outputs: XLR (L / R), Stereo headphone output: 6.3 mm jack, Power connector
Focusrite RedNet D16R MKII, 16-Channel AES3 I / O for Dante Audio-over-IP networks, Bi-directional, Up to 24 bit / 192 kHz, Level control for input and output channels, Power supply and Ethernet in redundant design with automatic switchover in the event of faults, EtherCON network connections with locking, 2 Combined 8-channel AES59 inputs and outputs with DB25 connections, Rear XLR input (can be used as DARS input or as traditional AES3 audio input), S / P-DIF input and output coaxial, WordClock inputs and outputs (BNC), RedNet Control and Dante Control software, Design: 19"/ 1 U
Focusrite RedNet D64R, 64-Channel MADI bridge for Dante network, Supported sample rate: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz, 2x Dante network connection, MADI input and output coaxial and optical, Wordclock input and output, Redundant power supply (2 integrated power supplies), Type: 19 "/ 1U, Weight: 4.32 kg
Focusrite RedNet MP8R, ADC with 8 Focusrite Mic Preamps for Dante Audio-over-IP Networks, Up to 24-bit / 192 kHz, AES67 Compliant, Gain range: 10 dB to 65 dB in 1 dB increments, Frequency range: 20 - 40,000 Hz (± 0.1dB), 20 dB pad, 48V Phantom power, HP Filter and phase reverse switchable per channel, Remote controllable functions for Yamaha CL and QL consoles: Gain, phantom power and HP filters, LED level meter and OLED display, Two integrated power supplies for redundant power supply, Type: 19" 1U, Dimensions: 48.2 x 4.45 x 39.4 cm (W x H x D), Weight: 5.75 kg@+*Connections:*@+@+, 8x XLR input, 2x EtherCON NE8FBH-S (compatible with RJ45) for redundant network functionality
Focusrite RedNet PCIeNX, PCIe DANTE Audio Interface, Up to 256 x 256 audio channels at 24-bit / 96 kHz or 128 x 128 audio channels at 24-bit / 176.4 or 192 kHz, Two RJ45 Ethernet ports for switching and redundancy modes, Additionally supports AES67 and Dante Domain Manager, Compatible with SMPTE ST 2110, For Windows PC or Mac (Intel and Apple Silicon systems), Multi-client ASIO and WDM (Windows) and CoreAudio (Mac)
Focusrite RedNet R1, Dante monitor controller / remote control for Focusrite Red audio interfaces, Monitor output configurations from mono to 7.1.4 surround (including Dolby Atmos), User-defined settings configurable with 12 outputs, 2 LC displays, Control elements for level, reference level presets, dimming, A / B switch, muting and various solo modes, Dante-enabled talkback section with built-in microphone and XLR, Input for an external microphone, Switchable + 48V phantom power, 1 Microphone input: XLR, Stereo headphone output: 6.3 mm jack, Footswitch input: 6.3 mm jack, Ethernet connection, Input for external power supply 12V DC 1A, Power supply via Ethernet or included power supply, Dimensions (W x H x D): 265 x 58 x 135 mm, Weight: 0.85 kg