Hardware

Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.

• Power Stage 700

  Seymour Duncan PowerStage 700, Guitar Amplifier, Can be directly connected to effects devices, Power: 700 W @ 4 Ohms, or 350 W @ 8 Ohms, 3-band EQ, 13 dB boost/cut in each frequency band, Speaker simulation, Controls for volume, bass, mid and treble, Power switch on the rear, 1/4" mono jack (L/R) inputs on the front, 2 (L/R) Speaker Twist/6.3 mm combo outputs on the rear, 2 (L/R) XLR outputs on the rear, 2 Cab Sim switches (one for each XLR output) on the rear, IEC socket for built-in PSU, Power status LED, Temperature status LED, O.C. status LED, Output impedance: 4-8 Ohms, Input voltage: 100-230V AC, Dimensions (L x W x H): 292 x 176 x 56 mm, Weight: 2.86 kg, Made in USA

• Power Station 100

  Fryette Power Station 100, Dual-Mode Reactance Amplifier, Easy-to-use power attenuator for volume control of high-performance tube amplifiers without the disadvantages of a conventional attenuator, Two remote-controlled, foot-switchable controls on the front for volume, presence and depth for maximum flexibility during live performances, Powerful mono block with 100 W from 2x 6550 tubes for incomparable response and dynamic range, Active safety bypass function deactivates the internal power amplifier and maintains the critical load of the amplifier if the loudspeaker output socket is accidentally unplugged, Output power: 100 watts at 2/4, 8 and 16 ohms, Tubes: 1 x 12AX7, 2 x 6550, Power consumption (max.continuous): 200 W @ 2/4 Ohm, 150 W @ 8 Ohm, 200 W @ 16 Ohm, Channel A slider: Volume, Presence & Depth, Channel B slider: Volume, Presence & Depth, Balanced line output with level control: XLR, Unbalanced line output 6.3 mm jack, FX Send & Return: 2x 6.3 mm jack, Speaker output: 6.3 mm jack, Remote foot switch socket: 6.3 mm stereo jack, Dimensions (W x H x D): 355 x 91 x 228 mm height with feet / 355 x 70 x 228 mm height without feet, Weight: 7.3 kg@+*Switches:*@+@+, Channel A / B, Hi / Lo input level, Treble Response (Flat / Brite / Edge), Low Frequency Response (Presence / Bass), Bypass (standby), Amplifier impedance: 2/4, 8 or 16 ohms, FX level Hi / Lo, Speaker impedance: 2/4, 8 or 16 ohms, Ground lift @+*Connections:*@+@+, Balanced line output with level control (XLR), Unbalanced line output 6.3 mm jack, FX-Send & return (2 x 6.3 mm jack), Speaker output (6.3 mm jack), Remote footswitch (6.3 mm stereo jack), Dimensions (W x H x D): 355 x 91x 228 mm, Weight: 7.3 kg

• Power Station PS-2A

  Fryette Power Station PS-2A, Power Attenuator, With built-in 50 Watt tube power amplifier with 6L6 tubes, The Power Station can be used for three main applications: Power reduction of powerful amplifiers without the disadvantages of conventional power attenuators, an amplification for small amps, and as a high quality adjustable reactive load for silent recording., Stepless power reduction, Effects loop-in, Line in for preamps, laptops, MP3 players etc., Line out, Amp input and speaker output 4/8/16 ohms separately switchable to match any amp or speaker, Reduce or increase the power of small amps, Effective tone control to equalise the sound in case of strong reduction, Natural playing feel due to the Reactive Load, the dynamic playing feel of the amp is maintained, Input Level Range switch well suited for use with vintage non-master volume tops, XLR balanced out, Silent Direct Recording via the unbalanced output, Weight: 6.8 kg, Dimensions (H x W x D): 91 x 355 x 228 mm, Matching gig bag: Art.#441103# (not included in delivery)

• Powerball II E645/2

  Engl Powerball II E645/2, Guitar Head Amp, All tube head amp, Power: 100 W, 4 Channels with 4 gain controls: Clean Gain 1 - Crunch Gain 2 - Lead Gain 3 - Lead Gain 4, Two tonally different lead sounds, 2x Master volume, Electronic Power Tube Monitoring, 6L6GC Tubes, Electronic power amp monitoring, Adjustable effects loop (parallel - serial), also controllable by foot, 2 Bottom Sound switches for Lead Channel 3 and Lead Channel 4, Depth Punch, Mid Boost switching, Adjustable Noise Gate in lead mode now also controllable via foot, Dimensions (L x H x D) 71 x 27 x 27 cm, Weight: 21 kg, Made in Germany, Footswitch optional - 181665 Z9

• Powercab 112

  Line6 Powercab 112, Active Modelling Guitar Box, With 6 speaker simulations, Can load third-party cabinet simulation impulse responses (IR), Equipped with: 1x 12"speaker and 1" compression driver, Power: 250W @ 8Ω, Frequency range: 70 - 20,000 Hz, Maximum SPL (sound pressure level): 125 dB @ 1 m, Fold-out feet, USB audio interface, Dimensions: 567 x 462 x 305 mm, Weight: 15.08 kg

• Powercab 112 Plus

  Line6 Powercab 112 Plus, Active Modelling Guitar Cabinet, With integrated USB audio interface, Loads impulse responses (IR) from third-party providers, With 6 loudspeaker simulations (expandable), Equipped with: 1 x 12"speaker and 1" compression driver, Power: 250W @ 8Ω, Frequency range: 70 - 20000 Hz, Maximum level: 125 dB @ 1 m, 2 Combo input jacks, L6 LINK input and output, Stereo output, Memory locations: 128, Foldable feet, Dimensions: 567 x 462 x 305 mm, Weight: 16.10 kg

• Powercab 212 Plus

  Line6 Powercab 212 Plus, Active 2 x 12 Stereo Cabinet for Electric Guitar, Active stereo guitar speaker system, Designed for use with modeling preamps and amplifiers - plays stereo presets in stereo, Choose between Speaker Modeling or Flat Mode (FRFR), Choice of 12 speaker models from classic to modern, Power: 500 watts stereo (2x 250 watts), Equipped with: 2 x Lightweight 12"neodymium coaxial speakers with high-frequency compression drivers and rugged 2-inch voice coils, Max. Sound pressure: 131dB, Neutral frequency response from 70 Hz to 20 kHz in flat mode, 128 Presets, Configurable for Flat, Speaker Modeling or IR mode, Weight: 21.59 kg, Suitable Powercab 212 Plus cover: Art.#469806# (not included)

• Powercab CL 112

  Line6 Powercab CL 112, Active Guitar Cabinet, Open housing, Rated power: 1x12" with 100 Watt, 6-way voice encoder for selecting virtual speaker voicings, Power Amp In mode for bypassing speaker voicings, 3-band EQ with low, mid and high boost/cut, XLR/6.3 mm combo input jack, XLR output with IR loading, MIDI input for external control of numerous functions, USB-B port for IR loading, Firmware updates and USB MIDI, Free Powercab CL IR Loader software, Weight: 32.63 lbs (14.80 kg), Dimensions (L x W x H): 5.0 in (635 mm) x 13.0 in (330 mm) x 21.5 in (546 mm)

• Powercab CL 212

  Line6 Powercab CL 212, Active Guitar Cabinet, Open housing, Rated power: 2x12" with 200 Watt, 6-way voice encoder for selecting virtual speaker voicings, Power Amp In mode for bypassing speaker voicings, 3-band EQ with low, mid and high boost/cut, XLR/6.3 mm combo input jack, XLR output with IR loading, MIDI input for external control of numerous functions, USB-B port for IR loading, Firmware updates and USB MIDI, Free Powercab CL IR Loader software, Weight: 42.01 lbs (19.06 kg), Dimensions (L x W x H): 30.0 in (762 mm) x 13.0 in (330 mm) x 21.5 in (546 mm)

• Powermate 1000-3

  Dynacord Powermate 1000-3, Reference Power Mixer, Power: 2x 1000 W/4 Ohm RMS, 2x 600 W / 8 Ohm, 2x 1350 W / 2.7 Ohm, 6 Mic/Line XLR inputs with 3-band parametric EQ, 4 Mic/Stereo line combo inputs with 3-band EQ, 2x 24-bit stereo effects processors with fixed presets, plus editable and storable user presets, 2x FX/AUX for internal effects devices, 2x AUX Pre/Post switchable, 2x monitor AUX (pre), Mute per channel, Switchable 80 Hz low-cut, Switchable Voicing Filter on each XLR input, Feedback filter for MON 1-2, New 11-band summing EQ, B-Master output for recording or mono subwoofer, etc, USB interface for music playback or output for recording applications (up to 4 tracks at the same time), Built-in MIDI interface in/out, Switched-mode power supply, Integrated speaker protection, Speaker Twist outputs, Volex mains input, Transport lid with integrated handle, Cubase LE license, Dimensions including lid: 510.5 x 164.5 x 571.5 mm, Weight with lid: 14 kg, Colour: Grey, 3 year manufacturer's warranty, Suitable accessories (not included in the scope of delivery): Rackmount RMK-1000-3, 12" gooseneck lamp 12V/5W (XLR 4-pin)

• Powermate 1000-3 70th Edition

  Dynacord Powermate 1000-3 70th Edition is a PA mixer.

• Powermate 1600-3

  Dynacord Powermate 1600-3, Reference Power Mixer, 2x 1000 W/4 ohm RMS, 2x 600 W / 8 ohm, 2x 1350 W / 2.7 ohm, 12 Mic/Line XLR inputs with 3-band parametric mids, Four Mic-/Stereo line combi-inputs with 3-band-EQ, Two 24-Bit stereo effects processor with fixed presets, plus editable and storable user presets, Two FX/AUX for internal effects device, Two AUX Pre/Post switchable, Two Monitor AUX (pre), Mute per channel, Switchable 80 Hz low-cut, Switchable Voicing Filter per XLR input, Feedback filter for MON 1-2, New 11-band summing EQ, B-Master output for recording or mono subwoofer, etc, USB Interface for music playback or output for recording applications (up to four tracks at the simultaneously), Built-in MIDI interface in/out, Switched-mode power supply, Integrated speaker protection, Speaker Twist outputs, Volex mains input, Dimensions: 663.5 x 164.5 x 571.5 mm, Weight with lid: 17 kg, Includes transport cover with integrated handle and Cubase LE licence, Three year warranty from manufacturer, Optional accessories: Gooseneck lamp 12V/5W 4-pin, 12’, XLR 4-pin (not included)

• Powermate 600-3

  Dynacord Powermate 600-3, Power Mixer, Power: 2x 1000 W / 4 Ohm, 6 Mic line channels, 2 Stereo line inputs, 3 AUX busses, 200 Editable stereo effects, 4 x I/O USB Interface, Speaker Twist output, 9-Band stereo master EQ, Weight: 9 kg, Incl. Plastic transport lid with magnet holder, Suitable 19" rack mount kit: RMK 600-3 - Article Nr. #285443# (not included), Suitable dust cover: Article Nr. #498246# (not included)

• Powerplay P1

  Behringer Powerplay P1, In-Ear Monitor Amplifier, Wired in-ear system with volume control, Balance control, Mono or stereo mode switchable, Output impedance: 10 Ohm, Input: 2 XLR sockets, Power supply via 9V battery or power supply (both not included), Incl. peak limiter, Headphone output: mini jack, Metal belt clip, Mounting on microphone stand possible to 5/8" or 3/8" thread

• Powerplay P16D Ultranet

  Behringer Powerplay P16D Ultranet, Digital Ultranet Distributor, System extension for up to 48 P16-M personal mixers, 8 RJ45 Outputs, 1 RJ45 Inputs, Status LED per channel, Integrated switched mode power supply (100 - 240 V)

• Powerplay P2

  Behringer Powerplay P2, Headphone amplifier, Very compact headphone amplifier for in-ear monitoring, XLR and jack input (combined, lockable), 3.5 mm Mini-jack jack for earphones, Built-in stereo / mono source switch, Volume control with on / off switch, Operation up to 12 hours with 2 AAA batteries or rechargeable batteries (not included, suitable batteries: Article Nr. #417474#), Dimensions (H x W x D): 33 x 38 x 132 mm, Weight: 140 g, Includes belt clip

• PowerShare PS404D

  Bose Professional PowerShare PS404D, 4-Channel Dante Power Amplifier, Power: 4x 100 W (THD + N <0,04%, 1 kHz, 4-8 Ohm, 70 / 100V), Power Share Technology: 1x 400 W (4-8 Ohm, 70/100V), Gain: 38 dB, Frequency response: 20 - 20,000 Hz (+/- 1 dB @ 1 W), Crosstalk: > 85 dB @ 1 kHz, > 65 dB @ 20 kHz, Dynamic range: 100 dB (at rated power, A-weighted), Audio latency: <1 ms, Integrated DSP with matrix mixer, Loudspeaker EQ, Real-Time 9-Band PEQ, Vpeak/Vrms Limiters, Delay, Band Pass, Mute/Output Polarity Inversion, Analogue inputs: 4 channel balanced Euroblock, Analogue outputs: 4 channel Euroblock, Digital Dante inputs: 4 channel RJ-45, Impedance: 20 kOhm, Max. Level: 20 dBu, Sensitivity: 4 / 12 dBu, Format: 19" / 1U, Dimensions (W x H x D): 483 x 44 x 414 mm, Weight: 6.4 kg

• PowerShareX PSX1204D

  Bose Professional PowerShareX PSX1204D, Four-channel installation power amplifier, Maximum peak power, balanced: 800 W at 2 Ohm / 600 W at 4 Ohm, 8 Ohm, 70 V, 100 V, Maximum peak power, unbalanced: 2200 W at 2 Ohm, 4 Ohm, 8 Ohm, 70 V, 100 V, Rated power, unbalanced: 1100 W at 2 Ohm / 1100 W at 4 Ohm in 70 V mode / 1100 W at 8 Ohm in 100 V mode / 1100 W at 70 V, 100 V, Frequency response: 20 - 20,000 Hz (±1.0 dB), Class D amplifier, Dante interface, Built-in DSP, Dynamic power‑sharing supports both symmetrical and asymmetrical distribution, Managed using Bose ControlSpace Designer app, Temperature-controlled fan, 6-pin Euroblock line inputs, 4-pin Euroblock GPI/remote input, RJ-45 ethernet, 8-pin Euroblock outputs, 12-pin Euroblock GPO/alarm outputs, RJ-45 Dante, 1U, Dimensions (W x H x D): 483 x 45 x 358 mm, Weight: 7.0 kg

• PowerShareX PSX2404D

  Bose Professional PowerShareX PSX2404D, Four-channel installation power amplifier, Maximum peak power, balanced: 1600 W at 2 Ohm / 1200 W at 4 Ohm, 8 Ohm, 70 V, 100 V, Maximum peak power, unbalanced: 3200 W at 2 Ohm / 3400 W at 4 Ohm / 2600 W at 8 Ohm / 3400 W at 70 V / 3000 W at 100 V, Rated power, unbalanced: 1600 W at 2 Ohm / 1700 W at 4 Ohm / 1300 W at 8 Ohm in 100 V mode / 1700 W at 70 V / 1500 W at 100 V, Frequency response: 20 - 20,000 Hz (± 1.0 dB), Class D, Dante interface, Built-in DSP, Power sharing technology for dynamic, even or asymmetrical power distribution, Bose ControlSpace Designer software for control, Temperature-controlled fan, 6-pin Euroblock line inputs, 4-pin Euroblock GPI/remote input, RJ-45 ethernet, 8-pin Euroblock outputs, 12-pin Euroblock GPO/alarm outputs, RJ-45 Dante, 1U, Dimensions (W x H x D): 483 x 45 x 358 mm, Weight: 7.0 kg

• PowerShareX PSX4804D

  Bose Professional PowerShareX PSX4804D, Four-channel installation power amplifier, Maximum peak power, balanced: 3000 W at 2 ohms and 4 ohms / 2400 W at 8 ohms, 70 V, and 100 V, Maximum peak power, unbalanced: 3600 W at 2 ohms / 5200 W at 4 ohms / 2600 W at 8 ohms / 4200 W at 70 V / 4400 W at 100 V, Rated power, unbalanced: 1800 W at 2 ohms / 2600 W at 4 ohms / 1300 W at 8 ohms / 2100 W at 70 V / 2200 W at 100 V, Frequency response: 20 Hz to 20 kHz (±1,0 dB), Class D amplifier, Dante interface, Integrated DSP, Dynamic power‑sharing supports both symmetrical and asymmetrical distribution, Managed with the Bose ControlSpace Designer app, Temperature-controlled fan, 6-pin Euroblock line inputs, 4-pin Euroblock GPI/remote input, RJ-45 ethernet, 8-pin Euroblock outputs, 12-pin Euroblock GPO/alarm outputs, RJ-45 Dante, 1U, Dimensions (W x H x D): 483 x 45 x 358 mm, Weight: 7.0 kg

• PowerSpace P21000A

  Bose Professional PowerSpace P21000A, Power Amplifier, Power: 2x 1000 W (THD + N <0.04%, 1 kHz, 4-8 Ohm, 70/100 V), I-Share Mode Power: 1x 2000 W (2-4 Ohm, 70/100 V), Gain: 38 dB, Frequency response: 20 - 20,000 Hz (+/- 1 dB @ 1 W), Crosstalk:> 80 dB @ 1 kHz,> 65 dB @ 20 kHz, Dynamic range: > 100 dBA (at rated power), Audio latency: <1 ms, Analogue inputs: 2 Channel balanced Euroblock, Impedance: 10 kOhm, Max. Level: 22 dBu, Sensitivity: -10 dBV / 4dBu / 14 dBu, Digital inputs and outputs: AMPLINK 8 channels via RJ45, Audio output: 2x Ch Terminal Block, Format: 19"/ 1 U, Installation depth: 406 mm, Weight: 6.6 kg

• PowerSpace P2600A

  Bose Professional PowerSpace P2600A, Power Amplifier, Output: 2x 600 W (THD + N <0.04%, 1 kHz, 4-8 ohms, 70 / 100V), I-Share Mode Power: 1x 1200 W (2-4 ohms, 70/100 V), Gain: 35 dB, Frequency response: 20 Hz to 20 kHz (+/- 1 dB @ 1 W), Crosstalk: > 80 dB @ 1 kHz, > 65 dB @ 20 kHz, Dynamic range: > 100 dBA (at rated power), Audio latency: < 1 ms, Analogue inputs: 2 channel balanced Euroblock, Impedance: 10 kOhm, Max. level: 22 dBu, Sensitivity: -10 dBV / 4dBu / 14 dBu, Digital inputs and outputs: AMPLINK 8 channels via RJ45, Audio output: 2x Ch terminal block, Format: 19"/ 1 U, Installation depth: 406 mm, Weight: 6.2 kg

• PowerSpace P4150+

  Bose Professional PowerSpace P4150+, DSP Power Amplifier, With SmartBass technology, routing, level control, delays, limiters, Bose speaker EQ settings and input and zone EQ settings, Opti-voice paging function, Auto standby, Power: 4x 150 W into 4-8 ohms or 70/100V, in i-Share mode 2x 300 W into 2-4 ohms or 70/100V, Frequency response: 20 - 20000 Hz, Latency: <1ms, Inputs: 3x balanced Euroblock, 1x balanced Euroblock (supports dynamic PTT/VOX microphone input or 600 Ohm phone paging input), 2x stereo RCA (summed internally mono), Outputs: 4x Euroblock, 1x line-out Euroblock, Remotely-controllable via an optionally available Bose ControlCenter (not included ), Model: 19"/1 U, Dimensions (H x W x D): 44 × 483 × 420 mm, Weight: 6.6 kg

• PowerSpace P4300+

  Bose Professional PowerSpace P4300+, DSP Power Amplifier, With SmartBass technology, routing, level control, delays, limiters, Bose speaker EQ settings and input and zone EQ settings, Opti-voice paging function, Auto standby, Power: 4x 300 W into 4-8 ohms or 70/100V, in i-Share mode 2x 600 W into 2-4 ohms or 70/100V, Frequency range: 20 - 20000 Hz, Latency: <1ms, Inputs: 3x balanced Euroblock, 1x balanced Euroblock (supports dynamic PTT/VOX microphone input or 600 Ohm phone paging input), 2x stereo RCA (internally mono summed), Outputs: 4x Euroblock, 1x line-out Euroblock, Remote-controllable via an optionally available Bose ControlCenter (not included in the delivery), Design: 19"/1 U, Dimensions (H x W x D): 44 × 483 × 420 mm, Weight: 6.6 kg