Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.
Ibanez PGMM31-WH Paul Gilbert Sign., Electric Guitar, Body: Poplar, Neck: Maple, Fretboard: Maple, Neck profile: PGMM, Black fretboard inlays, Scale: 564 mm, Nut width: 41 mm, 24 Medium frets, Fixed bridge, Pickup: Infinity R (neck) and Infinity R (bridge) humbuckers, 1 Volume control, 5-Way toggle switch, Black hardware, Colour: White
Boss PH-3, Effects Pedal, Phaser, Classical and modern phaser sounds with tap tempo, Seven different modes, Controls: Rate, Depth and Resonance, Power consumption: 50mA, Can be operated with 9 V battery or 9 V DC power supply (coaxial connection - Negative pole inside - suitable power supply available: Article #409939# - not included), Dimensions (L x W x H): 73 x 129 x 59 mm, Weight: 420 g
Telex PH-88 Headset, Super-light headset, Single-ear lightweight, For intercom systems, Dynamic goose neck mic, With 4-pin XLR female connector, High-quality auditory system, Receiver impedance 300 Ohm, Microphone impedance 200 Ohm, Weight 131g
Quilter Phantom Block Pre Amp/Cab Sim, Pre Amp & DI for Electric Guitar, The high-impedance input achieves the optimum sound with passive standard pickups, The gain ranges from clean to overdrive, A tone control with a wide range covers the most popular sounds and, The master adjusts the overall output level, The switchable Cab Sim warms up the sound of the electric guitar, while FR (Full Range) is suitable for other instruments such as acoustic guitars and keyboards, Controls: Gain, Tone, Master, Switch: Ext Pwr / 9V Batt, FRFR / Cab Sim, LED: Effect on, Footswitch: Effect bypass, Input: 6.3 mm jack, Output: XLR, Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside, Power supply with 48 V phantom power, a 9 V battery or a 9 V DC power adapter (not included - suitable power supply: Art.#409939#), Dimensions (W x D x H): 111 x 60 x 48 mm, Weight: 295 g
Behringer Phara-O Mini is a synthesizer.
Diamond Phase, Effect Pedal for Electric Guitar and Bass, A fully analogue 6-stage JFET phaser that delivers the smooth, musical phasing sound of the original Diamond PSH-1, With advanced features and a compact design, a choice of 2-, 4- or 6-stage architecture, and an improved feedback circuit, Controls: Level, Speed, Regen, Depth, Switch: Stages 2/4/6, LED: Effect on, Footswitch: Effect bypass, Input: 6.3 mm jack, Output: 6.3 mm jack, Power supply adapter connection: barrel connector 5.5 x 2.1 mm, centre negative, Current consumption: 80 mA, Power supply via a 9–15 V DC mains adapter (suitable power supply unit: Art.#409939#, not included), True bypass, Dimensions (W x D x H): 67 x 122 x 40 mm, Weight: 310 g, Made in Canada@+*Note:* Battery operation not supported
MXR Phase 100, Phaser Pedal@+Together with the decent phase 90, which was only equipped with a speed controller, the phase 100 is probably THE vintage phaser effect. The classic phasing sounds of the 70s are not a problem, but Eddie Van Halen liked to "spice" his legendary lead sound - especially on the early records - with an MXR phaser @+@+The MXR 100 can be used with a rotary switch to set different waveforms, which allows for more spectacular and modern phasing sounds., 4-Way rotary switch, 4 Different intensity levels selectable via 4-way rotary switch, Can be operated via a power supply or with a 9V battery, Status LED
MXR Phase 90, Effect Pedal@+Effects UnitThe Vintage Phaser effect, just like the MXR back in the day. There is, of course, only one control with which the speed of the phasing can be adjusted, everything else is set in order to achieve a really pleasant, never too intrusive-sounding effect. The classic phasing sounds of the 70's were often created with this piece of equipment. This is how Eddie Van Halen "spiced up" his legendary Lead sound, especially on the early records. This can clearly be heard in his parade solo on "eruption".@+@+, Rugged metal casing, Non-slip rubber base, Phaser with "Speed control", Power supply: 9V battery or optional power supply available
Korg Phase8, Synthesizer, Electro magnetic sound synthesis, 8-voice polyphony, Eight interchangeable metal resonators and five resonators for semitones, Envelope shaping, wavefolding, tremolo and pitch-dependent modulations in the audio range, Intuitive sound changes through physical interaction with the resonators, Integrated sequencer with 8 voices, 8 steps and 8 memory slots, ‘Air’ slider for amplifying or attenuating the acoustic response to external objects that come into contact with the instrument, Shift control for delaying trigger signals relative to the selected or synchronised tempo, Parameter changes can be recorded in the sequencer, Line output: 6.3 mm jack, Stereo heaphone output: 3.5 mm mini jack, Sync input and output, CV input (+/- 5 V), MIDI input and output (mini jack / TRS-A), USB-C (for USB-MIDI and firmware updates), Dimensions (W x D x H): 231 x 236.5 x 46 mm, Weight: 1.71 kg, Includes external DC 12V power supply and Allen key
Korg Phase8 Limited Edition, Synthesizer, Limited edition, Electro magnetic sound synthesis, 8-voice polyphonic, Eight interchangeable metal resonators and five resonators for semitones, as well as three limited-edition resonators manufactured by KORG Berlin, Envelope shaping, wavefolding, tremolo and pitch-dependent modulations in the audio range, Intuitive sound changes through physical interaction with the resonators, Integrated sequencer with 8 voices, 8 steps and 8 memory slots, ‘Air’ slider for amplifying or attenuating the acoustic response to external objects that come into contact with the instrument, Shift control for delaying trigger signals relative to the selected or synchronised tempo, Parameter changes can be recorded in the sequencer, Line output: 6.3 mm jack, Stereo headphone output: 3.5 mm mini jack, Sync input and output, CV input (+/- 5 Volt), MIDI input and output (mini jack / TRS-A), USB-C (for USB-MIDI and firmware updates), Dimensions (W x D x H): 231 x 236.5 x 46 mm, Weight: 1.71 kg, Includes external DC 12V power supply and Allen key
Taylor Trumpets Phat Boy, Bb Flugelhorn, Bore: 11.00 mm, Body made of brass, Bell made of copper, Tuneable mouth pipe, Three stainless steel valves, Trigger on the 3rd valve slide, Three Amado water keys, Ergonomic shape for ultimate comfort, Includes case and gold-plated ML mouthpiece
Radial Engineering Phazer, Class A phase controller, For combining two sources such as microphone and DI signal, Switchable Gnd / lift, Polarity and bypass, XLR in out, Low pass filter, Includes power supply, Dimensions: 114 x 57 x 147 mm, Weight: 1.4 kg
Wampler Phenom Distortion, Effect Pedal for Electric Guitar, Distortion, Collective Series, Developed by Brian Wampler, Dual voice distortion pedal with switchable voicing modes, Bright mode for extra pressure and attack, Classic mode for smoother distortion, Controls: Bass, Mids, Treble, Gain, Volume, Switch: Bright / Classic, LED: Effect On, Footswitch: Effect Bypass, Input: 6.3 mm jack, Output: 6.3 mm jack, Power supply connection: Barrel connector 5.5 x 2.1 mm, centre negative, Power supply via a 9–18 V DC mains adapter (not included – suitable power supply: Art #409939#), True Bypass, Dimensions (W x D x H): 64 x 112 x 36 mm, Made in USA@+*Note:* Battery operation is not supported.
WesAudio Phoebe, 1-Channel Class-A Microphone / Instrument / Line Preamplifier with Digital Recall, 500 Module format, 100% Analogue mic / line preamp: +28 dBu headroom, Mic gain up to 75 dB, Carnhill input and output transformers, LED meter for output signal with clip indicator, +48 V phantom power switchable, Phase reverse switch, Switchable input impedance: 1200 / 3000 Ohm, Iron Pad (passive output attenuation circuit with 1 dB step, after output transformer), All controls/analogue settings are fully controllable via the WesAudio GCon DAW plug-in, 1 Microphone / instrument / line input: XLR / 6.3 mm jack combo, 1 Mini-USB connector, Construction: 500 module, Dimensions (W x H x D): 38 x 133 x 145 mm
SPL Phonitor 3, Headphone Amplifier and Monitor Controller with 120 V Technology, 3 Analogue stereo inputs: 3x XLR stereo, Output switch for easy switching from headphone to speaker playback and mute function in the centre position, Phonitor matrix with crossfeed, speaker angle and centre level, Mono/Stereo, Laterality control: shifts the stereo image to the left or right to centre the stereo centre on the listening side, Solo L/R, Phase inversion for L and R, L/R Swap, 120 V technology, Headphone output can be boosted by 12 dB via DIP switch on the rear panel, Phonitor matrix can be output to preamp out, Complete monitor controller, Output power headphone output (1 kHz, 1 % THD, 250 Ohm): 2 x 5 W, Output power headphone output (1 kHz, 1 % THD, 32 Ohm): 2 x 1 W, Frequency range: 10 - 100,000 Hz, Dynamic range: 134.5 dB, Dimensions (W x H x D): 278 x 100 x 300 mm, Weight: 3.9 kg
SPL Phonitor 3 DAC, Headphone Amplifier, Monitor Controller and DAC with 120V Technology, 6 Digital & analogue stereo inputs: 2x XLR stereo, USB, S/PDIF (coaxial), S/PDIF (optical) and ES/EBU (XLR), Output switch for easy switching from headphone to speaker playback, plus mute function in the centre position, DAC converter: 32 bit, up to 768 kHz, Support for DSD files up to DSD256, Phonitor matrix with crossfeed speaker Angle and Centre Level, Mono/stereo, Laterality control: shifts the stereo image to the left or right to centre the stereo on the monitor side, Solo L/R, Phase inversion for L and R, L/R swap, 120V technology, Headphone output can be boosted by 12 dB via DIP switch on the rear panel, Phonitor matrix can be output to preamp out, Fully-fledged monitor controller, Output power headphone output (1 kHz, 1% THD, 250 O): 2x 5 W, Frequency range: 10 - 100,000 Hz, Dynamic range: 134.5 dB, Dimensions (W x H x D): 278 x 100 x 300 mm, Weight: 4.15 kg
SPL Phonitor One d, Headphone Amplifier, Powerful headphone amplifier for studio and hi-fi applications, Infinitely adjustable crossfeed function - crosstalk between the two stereo channels for more realistic surround sound, Digital input with 32 bit DA converter, Class Compliant, Support of sampling frequencies up to 768 kHz PCM as well as playback of DSD (DSD4 or DSD256), Pre-amplification by 2 Burr-Brown OPA 2134 SoundPlus operational amplifiers for extremely low noise and minimal distortion, THD + N (0 dBu, 10 Hz - 22 kHz, 600 O): 0.002%, Max. Input level: +22.5 dBu, Noise (A-weighted, 600 O): -97 dBu, Max. Output power (600 O): 2x 190 mW, Max. Output power (250 O): 2x 330 mW, Max. Output power (47 O): 2x 400 mW, Frequency response headphone output (- 3 dB): 10 - 200,000 Hz, Three switchable stereo inputs: 6.3 mm balanced TRS jack, Unbalanced RCA and USB, Headphone output: 6.3 mm stereo jack socket, Dimensions (W x H x D): 210 x 49.6 x 220 mm, Weight: 1.45 kg
SPL Phonitor x + DAC768xs, Preamp / Monitor Controller, Suitable for all headphones with impedances from 10 ohms, Balanced and unbalanced analogue inputs and outputs (XLR, RCA), Laterality: Extreme fine balance control, Mono / stereo selector switch, Maximum output power: 2 x 3.7 W (at 120 ohms), Frequency range: 10 Hz to 300 kHz (-3 dB), Harmonic: 0.00091% (KH), 0.00085% (Line), Dynamic range: 135.5 dB (KH), 136.3 dB (line), Linear power supply with toroidal transformer, Power consumption: max 40 VA, Stand-by power exception: 0.7 W, Front and cover made of aluminium, Housing made of powder-coated sheet steel, Dimensions: (W x H x D) 278 x 100 x 335 mm (with foot and volume controls), Weight: 4.3 kg, Colour: Black, Made in Germany
SPL Phonitor xe Black, Headphone Amplifier, Suitable for headphones with a jack plug and balanced headphones with a 4-pin XLR plug, 2 VU meters for left and right audio channels, Laterality regulation for detailed balancing, MODE switch for mono / stereo switching, With Phonitor Matrix for fatigue-free listening, Crossfeed control for level and frequency adjustment of the left and right audio channels, Angle control for determining the interaural time difference, Analog inputs: 2x XLR (female, balanced), 2x RCA (unbalanced), Headphone output: 1x TRS (6.3 mm jack), 1x XLR (4-pin RCA), Output power (TRS): 2x 5 W (at 250 Ohm), Dynamic range (TRS): 135.5 dB, Output power (4-pin XLR): 2x 3.5 W (at 250 Ohm), Dynamic range (4-pin XLR): 130.5 dB, Frequency range: 10Hz - 300kHz (-3dB), THD + N (10Hz - 22kHz, 0dBu): 0.00082%, Linear power supply with toroidal transformer, Power consumption: max. 40VA, Stand-by power consumption: <0.3W, Dimensions (W x H x D): 278 x 100 x 300 mm, Weight: 4.9 kg, Colour: Black, Made in Germany
SPL Phonitor xe black + DAC768v2, Headphone Amplifier, Suitable for headphones with jack plug and balanced headphones with 4-pin XLR plug, Provides the option of integrating up to 6 stereo sources: XLR, RCA, USB, Coax, Optical and AES/EBU, AKM converter chip for high sound details, 32-Bit resolution and up to 768kHz sampling rate, Direct Stream Digital up to a resolution of DSD4 or DSD256, 2 VU meters for left and right audio channel, Laterality control for detailed balancing, MODE switch for mono/stereo switching, With phonitor matrix for fatigue-free listening, Crossfeed control for level and frequency adjustment of the left and right audio channel, Angle control for determining the interaural time difference, Analogue inputs: 2x XLR (female, balanced), 2x RCA (unbalanced), Digital inputs: 1x AES/EBU (XLR), 1x Coaxial SPDIF (RCA), 1x Optical SPDIF (Toslink), 1x USB (B), Headphone output: 1x TRS (6.3 mm, jack), 1x XLR (4-pin, balanced), Output power (TRS): 2 x 5 W (into 250 Ohm), Dynamic range (TRS): 135.5 dB, Output power (4-pin XLR): 2 x 3.5 W (into 250 ohms), Dynamic range (4-pin XLR): 130.5 dB, Frequency range: 10 - 300,000 kHz (+/-3 dB), THD + N (10Hz – 22kHz, 0dBu): 0.00082%, Linear power supply with toroidal transformer, Power consumption: max. 40 W, Stand-by power consumption: < 0.3 W, System requirements: Win 10 or later, Class Compliant under Mac, Dimensions (W x H x D): 278 x 100 x 300 mm, Weight: 4.9 kg, Colour: Black, Made in Germany
SPL Phonitor xe Silver, Headphone Amplifier, Suitable for headphones with jack plug and balanced headphones with 4-pin XLR plug, 2 VU meters for left and right audio channel, Laterality control for detailed balancing, MODE switch for mono/stereo switching, With phonitor matrix for fatigue-free listening, Crossfeed control for level and frequency adjustment of the left and right audio channel, Angle control for determining the interaural time difference, Microphone input: 2 XLR female, balanced, RCA input: 2 unbalanced, Headphone output: 1 TRS 6.3 mm jack, XLR output: 4-pin, balanced, Output power (TRS): 2 x 5 W (into 250 Ohm), Dynamic range (TRS): 135.5 dB, Output power (4-pin XLR): 2 x 3.5 W (into 250 ohms), Dynamikumfang (4-Pol XLR): 130,5 dB, Frequency range: 10 - 300 kHz (+/-3 dB), THD + N (10Hz – 22kHz, 0dBu): 0.00082%, Linear power supply with toroidal transformer, Power consumption: max. 40 W, Stand-by power consumption: < 0.3 W, Dimensions (W x H x D): 278 x 100 x 300 mm, Weight: 4.9 kg, Colour: Silver, Made in Germany
Tsakalis AudioWorks Phonkify X Env. Filt & Octaver, Effect Pedal for Electric Guitar, Independent filter and octave effects, Three filter modes: Low-pass, band-pass and combo-blend, Octave up, octave down or a mix of both, Internal voltage doubling for more headroom, True bypass, Controls: Vol, Mix, In Gain, Oct, Q, Freq, Switches: Order (Post/Pre), Freq (LP/BP/LP-HP), Footswitch: Effect bypass, LED: Octave On, Filter On, Input and output: 6.3 m jack, Expression pedal input: 6.3 mm stereo jack, Power consumption: 120 mA, Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector, centre negative) - suitable power supply Art. #409939# (not included), Dimensions (W x D x H): 70 x 125 x 65 mm, Weight: 470 g, Handmade in Greece@+*Note:* No battery operation possible
Pro-Ject Phono-Box, Phono Preamplifier, Equaliser preamplifier with MM / MC switching, Max. gain: 40 dB (MM)/ 60 dB (MC), Converts your phono signal into a line level signal, RIAA equalisation, Inputs and outputs: RCA, hard gold-plated RCA jacks, Dimensions (W x H x D): 103 x 36 x 104 (115 mm with jacks), Weight (without power supply): 0.57 kg, Colour: Black
Pro-Ject Phono-Box E, MM Phono Preamplifier, Design principle inspired by Dr. Sykora, Internal metal shielding, Compact housing, Gold plated RCA connectors, Weight: 0.3 kg, Dimensions (W x H x D): 120 x 32 x 106 mm, Colour: Black High Gloss, Incl. external power supply unit