Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.
Audix , Dynamic Vocal Microphone, Enables dynamic pick-up at a very short speaking distance, Polar pattern: Supercardioid, VLM capsule, Clear voice sound without distortion at extremely high sound pressure levels, Frequency: -6 dB / 52 Hz - 17 kHz, Max SPL: 144 dB, Connection: 3-Pin XLR, Impedance: 50 Ohm, Sensitivity: %NBR1% mVrms, Dimensions (L x Ø) 179 x 50 mm (capsule) / 24 mm (handle), Weight: 0.179 kg, Colour: Black, Includes microphone clamp and microphone bag
NANO Modules ONA, Eurorack module, Analogue VCO/LFO on CEM3340 basis, Octave selector switch (control range: 8 octaves) and Fine-Tune control, Selector switch for VCO and LFO mode, Selector switch for linear or exponential FM, CV inputs for FM and pulse width with attenuators, Hard sync input, Waveform outputs for: Sine, triangle, sawtooth, pulse, two complex waveforms and two square sub-octaves (-1 octave and -2 octaves), Current consumption: 50mA (+12V) / 30mA (-12V), Width: 8 HP, Depth: 30 mm
Ortega ONB-PTWO Gigbag, Gig Bag, Suitable for Ortega PTWO Amp, Material: padded nylon, Adjustable shoulder strap, Two robust handles, Colour: Black
Rodec One, Case for Rodec 100 Modular Format, Suitable for 5 Rodec 100 series module, +26 dBU Headroom, Analogue inputs: 2 x 6.3 mm TRS jacks, dedicated phono inputs with ground connection for use with the optional M-101 (Art.#611573# – not included), 2 x 3.5 mm TS CV inputs (+/- 5 V), sidechain input, Analogue outputs: 2 x 6.3 mm TRS jack, Sync: MIDI Clock Sync (3.5 mm TRS input), Pulse Sync (3.5 mm TS input), Power supply via external DC power supply (12 V/2 A), Housing material: Metal, Dimensions: 85 x 185 x 195 mm, Weight: 1.1 kg, Includes power supply
Acus One 10Simon-N, Amplifier for Acoustic Guitar, Also suitable for amplifying vocals and other acoustic instruments, With tilt function, Power: 300 watts, Equipped with: 1x 10" woofer, 1x 1" dome tweeter, Bass reflex housing, Frequency response: 50 Hz - 20,000 Hz, Three separately controllable channels with jack or balanced XLR input and switchable phantom power, 3-band push/pull EQ (-15 dB to +15 dB) tone control per channel (bass, midrange, treble), Gain (-12 dB to +15 dB) control per channel, Master volume control, AUX channel (input: stereo mini jack) with 3 controls for volume and 2-band EQ, Four effects (three compressor modes (Flat, Bass, Jazz)) with adjustable FX return and FX length, Footswitch input, Balanced XLR DI output, TRRS output, Bluetooth Audio In, Housing: Plywood, Slanted monitor angle, Stand flange for 36 mm speaker stand, Dimensions (W × H × D): 301 × 384 × 464 mm, Weight: 13.6 kg, Colour: Dark cherry, Includes power supply and BT100 Bluetooth receiver
Acus One 5Simon-N, Amplifier for Acoustic Guitar with Tilt-Back Function, Also suitable for amplifying vocals and other acoustic instruments, Power: 75 watts, Equipped with: One 5" woofer and one 1" dome tweeter, Bass reflex cabinet, Frequency range: 50 Hz - 20,000 Hz, Three separately controllable channels with jack or balanced XLR input and switchable phantom power, 3-band push/pull EQ (-15 dB to +15 dB) tone control per channel (bass, midrange, treble), Gain control (-12 dB to +15 dB) per channel, Master volume control, AUX channel (input: stereo mini jack) with three controls for volume and 2-band EQ, Four effects (three compressor modes (Flat, Bass, Jazz) with adjustable FX return and FX length, Footswitch input, Balanced XLR DI output, TRRS output, Bluetooth Audio In, Housing: Plywood, Slanted housing, Speaker stand flange mount for 36 mm speaker stands, Dimensions (W × H × D): 253 × 305 × 280 mm, Weight: 7.4 kg, Colour: Dark cherry, Includes power supply and BT100 Bluetooth receiver
Acus One 8Simon-N, Amplifier for Acoustic Guitar with Tilt-Back Function, Also suitable for amplifying vocals and other acoustic instruments, Power: 200 watts, Equipped with: One 8" bass speaker and one 1" dome tweeter, Bass reflex cabinet, Frequency response: 50 Hz - 20,000 Hz, Three separately controllable channels with jack or balanced XLR input and switchable phantom power, 3-band push/pull EQ (-15 dB to +15 dB) tone control per channel (bass, midrange, treble), Gain (-12 dB to +15 dB) control per channel, Master volume control, AUX channel (input: stereo mini jack) with three controls for volume and 2-band EQ, Four effects (three compressor modes (Flat, Bass, Jazz)) with adjustable FX return and FX length, Footswitch input, Balanced XLR DI output, TRRS output, Bluetooth Audio In, Housing: Plywood, Slanted housing, Speaker stand flange mount for 36 mm speaker stands, Dimensions (W × H × D): 277 × 384 × 310 mm, Weight: 10.4 kg, Colour: Dark cherry, Includes power supply and BT100 Bluetooth receiver
Neotone One Digital Handpan Ash, Digital Handpan, Nine normal tone fields + ding + dome, Nine possible scales, controlled by hotkeys, Any number of possible scales, controlled by user interface, MIDI control: Six body sections + nine tone fields + ding + dome, Rechargeable battery: Li 7.4 V, 7800 mAh, Battery life: Eight hours, Charging time to full charge: Four hours, Velocity sensitivity of sensors: 20 to 5000 g, Sensors’ positional accuracy: 0.5 cm, Audio latency: 5 ms, DAC: 24 Bit / 384 kHz, Signal-to-noise ratio SNR: 112 dB, Dimensions: (Ø x H): 470 x 160 mm, Including black special drum bag with shoulder strap and backpack straps, dimensions (Ø x H): 520 x 220 mm@+*Connectors:*, Unbalanced line outputs (R/L), Headphone output, MIDI input and output, USB, TRIG/EXPR@+*Pre-programmed sound scales:*, DOME+1: B Amara B2 F#3 A3 B3 C#4 D4 E4 F#4 A4 B4, DOME+2: C Aegean C3 E3 G3 B3 C4 E4 F#4 G4 B4 E5, DOME+3: C# Pygmy C#3 F#3 G#3 A3 C#4 E4 F#4 G#4 A4 C#5, DOME+4: D Kurd D3 A3 Bb3 C4 D4 E4 F4 G4 A4 C5, DOME+5: F# Pygmy F#2 C#3 F#3 G#3 A3 C#4 E4 F#4 G#4 A4, DOME+6: G Romanian Hijaz G3 C4 D4 D#4 F#4 G4 A4 A#4 C5 D5
Acus OneForstrings 10 Ferdi BL, Amplifier for Acoustic Guitar, Power: 250 Watt, Speaker configuration: 1x 10" woofer and 1x 1" compression driver tweeter, Frequency range: 40 - 20,000 Hz, 3 Channels with inputs for mic or instrument, Separate controls per channel for gain (-12 db to +15 db) and volume, 3-Band push/pull EQ (-15 db to +15 db) per channel with separately adjustable highs, mids and basses, FX Send to the effects section, Compressor on channel 1 with controls for threshold and ratio, 3 compressor styles (flat, bass, jazz), Aux channel with 3 controls for volume and 2-band EQ, FX section with adjustable FX return and FX length, Master volume control with standby function, 3 Mic inputs: XLR 1 kOhm, 3 Instrument inputs: TRS jack 110 kOhm, Footswitch input, XLR Direct output, TRRS input, TRRS output, Bluetooth audio input, USB-C for separately available power bank (not included), Housing: Plywood (cherry), Dimensions (W x H x D): 277 x 464 x 477 mm, Weight: 13.6 kg, Colour: Blackwood, Includes power supply unit
Acus OneForstrings 10 Ferdi Cherry, Amplifier for Acoustic Guitar, Power: 250 Watts, Speaker configuration: 1x 10" woofer and 1x 1" compression driver tweeter, Frequency range: 40 Hz - 20,000 Hz, 3 Channels with inputs for mic or instrument, Separate controls per channel for gain (-12 db to +15 db) and volume, 3-Band push/pull EQ (-15 db to +15 db) per channel with separately adjustable highs, mids and basses, FX Send to the effects section, Compressor on channel 1 with controls for threshold and ratio, 3 compressor styles (flat, bass, jazz), Aux channel with 3 controls for volume and 2-band EQ, FX section with adjustable FX return and FX length, Master volume control with standby function, 3 Mic inputs: XLR 1 kOhm, 3 Instrument inputs: TRS jack 110 kOhm, Foot switch input, XLR Direct output, TRRS input, TRRS output, Bluetooth audio input, USB-C for separately available power bank (not included), Housing: Plywood (cherry), Dimensions (W x H x D): 277 x 464 x 477 mm, Weight: 13.6 kg, Colour: Cherrywood, Includes power supply and BT1 Bluetooth receiver
Acus OneForstrings 4 Ferdi BL, Amplifier for Acoustic Guitar, Power: 40 Watt, Speaker configuration: 1x 4" woofer and 1x 0,7" dome tweeter, Bass reflex housing, 1 Channel, 1 TRS Line input, 1 XLR mic input with shared volume control, TRRS Audio In/Out, 2-Band boost EQ with controls for high & low, Adjustable reverb effect, Master voluem control, Bluetooth audio input, USB-C for optional power bank (not included in the scope of delivery), Housing: Plywood (cherry), Frequency response: 70 Hz - 20,000 Hz, Dimensions: (W x H x D): 254 x 254 x 123 mm, Weight: 2.4 kg, Includes power supply unit, Colour: Blackwood
Acus OneForstrings 4 Ferdi Cherry, Amplifier for Acoustic Guitar, Power: 40 watts, Equipped with: One 4" woofer and one 0.7" tweeter, Bass reflex housing, One channel, One TRS line input, one XLR mic input with common volume control, TRRS audio in / out, 2-band boost EQ with controls for high and low, Adjustable reverb effect, Master volume control, Bluetooth audio input, USB-C for optional power bank (not included), Housing: Plywood (cherry), Frequency response: 70 Hz - 20,000 Hz, Dimensions (W x H x D): 254 x 254 x 123 mm, Weight: 2.4 kg, Colour: Cherrywood, Includes power supply and BT1 Bluetooth receiver
Acus OneForstrings 5 Ferdi BL, Amplifier for Acoustic Guitar, Power: 70 Watt, Speaker configuration: 1x 5" woofer and 1x 1" dome tweeter, Frequency range: 50 - 20.000 Hz, 3 Channels with inputs for mic or instrument, Separate controls per channel for gain (-12 db to +15 db) and volume, 3-Band push/pull EQ (-15 db to +15 db) per channel with separately adjustable highs, mids and basses, FX Send to the effects section, Compressor on channel 1 with controls for threshold and ratio, 3 compressor styles (flat, bass, jazz), Aux channel with 3 controls for volume and 2-band EQ, FX section with adjustable FX return and FX length, Master volume control with standby function, 3 Mic inputs: XLR 1 kOhm, 3 Instrument inputs: TRS jack 110 kOhm, Footswitch input, XLR Direct output, TRRS input, TRRS output, Bluetooth audio input, USB-C for separately available power bank (not included), Housing: Plywood (cherry), Dimensions (W x H x D): 253 x 305 x 280 mm, Weight: 7.4 kg, Colour: Blackwood, Includes power supply
Acus One Ferdi 5 Cherrywood, Amplifier for Acoustic Guitar, Power: 70 watts, Speaker configuration: One 5" woofer and one 1" dome tweeter, Frequency range: 50 - 20,000 Hz, Three channels with inputs for mic or instrument, Separate controls per channel for gain (-12 db to +15 db) and volume, 3-band push/pull EQ (-15 db to +15 db) per channel with separately adjustable highs, mids and basses, FX send to the effects section, Compressor on channel 1 with controls for threshold and ratio, three compressor styles (flat, bass, jazz), Aux channel with three controls for volume and 2-band EQ, FX section with adjustable FX return and FX length, Master volume control with standby function, Three mic inputs: XLR 1 kOhm, Three instrument inputs: TRS jack 110 kOhm, Footswitch input, XLR direct output, TRRS input, TRRS output, Bluetooth audio input, Housing: Plywood (cherry), Dimensions (W x H x D): 253 x 305 x 280 mm, Weight: 7.4 kg, Colour: Cherrywood, Includes power supply
Acus One Ferdi 8 Blackwood, Amplifier for Acoustic Guitar, Power: 140 watts, Speaker configuration: 8" woofer and 1" dome tweeter, Three channels with inputs for mic (XLR 1 kOhm) or instrument (TRS 110 kOhm), Separate controls per channel for gain (-12dB to +15dB), volume, 3-band push/pull EQ (+/-15dB) and FX send to effects section, Compressor on channel 1 with controls for threshold and ratio, 3 compressor styles (flat, bass, jazz), Aux channel (TRRS input) with three controls for volume and 2-band EQ, FX section with adjustable FX return and FX length, Master volume control with standby function, Footswitch connector, XLR direct out, TRRS output, Bluetooth audio input, Frequency range: 40-20,000 Hz, Pole mount adaptor on the bottom, Housing: Plywood (cherry), Dimensions (W x H x D): 277 x 384 x 310 mm, Weight: 10.4 kg, Colour: Blackwood, Includes power supply and BT1 Bluetooth receiver
IGS Audio One LA 19", 1-Channel Tube Compressor / Limiter, Peak and gain reduction controls (24-position Elma switches), Switch for compressor / limiter function (compressor ratio 4:1, soft-knee; limiter ratio 8 :1), Max. gain: 30 dB, Max. gain reduction: 36 dB, Attack: 1 ms, Release: 0.5 - 5 s (50% @ 60ms), VU/GR meter switchable, Bypass switch, Internal power supply 115/230V AC, 50 - 60 Hz, Construction: 19" / 2HE, Depth: 230 mm
IGS Audio One LA 500, Opto compressor / limite 500 format, VU Meter, Limiter/compressor mode, Gain-output level, Peak reduction, In/Bypass, +4 DB Operating level, Original Teletronix '68 audio path, Input: JJ 12AX7 tubes, Output: JJ 12AU7 tubes, Max. out: +21 dBU, Format: Module 500
Rane One MKII, Professional Motorised DJ Controller, 7.2" motorised turntable with high torque, 29 internal hardware effects with OLED display and direct access to software effects with 2 metal FX paddles, MAG FOUR Crossfader (with adjustable curve and cut-ins), High/low-pass filter & 3-band EQ, Dedicated stems control: Stem level, stem pad mode, stem roll, stem FX, Loop section, Independent multi-mode performance pads: velocity-sensitive, multi-colour backlit pads (8 per deck), Sampler volume control, Four adjustable channel FX, Turntable-style start/stop button, Two Line / Phono inputs, Two TRS/XLR microphone inputs (with reverb and ECHO FX hardware effect), Two USB Type B inputs, Two XLR main outputs, Two XLR booth outputs, Two RCA outputs, One 6.35 mm TRS jack headphone output, One 3.5 mm TRS jack headphone output, Dynamic range: 110 - 113 dB (A), Converter: 24 bit PCM, 48 kHz, Power consumption: 50 W, Dimensions (W x D x H): 674 x 345 x 124 mm, Weight: 10.68 kg, Serato DJ Pro included (upgrade to Serato DVS subject to a fee)
OXI Instruments One MKII Black Edition, Performance Step Sequencer, Eight independent sequencers, each with six selectable modes: Mono, Poly (up to seven voices), Chord (up to eight voices), Multitrack (eight tracks), Stochastic, Matrix (regenerative sequencer), Available in each mode: Adjustable velocity, note length, probability, glide, ratchets and micro-timing per step, Random, Euclidean and pattern generator, Two LFOs with multiple waveforms per sequencer, Start step, end step, running direction, clock divider/multiplier and transposition can be edited in real-time per sequencer, Eight modulation tracks per sequencer, programmable to internal parameters or MIDI controllers, Programmable arpeggiator, Keyboard mode with selectable scale, Max. 128 steps per sequencer pattern, microSD card slot for unlimited storage space for patterns, projects, songs, grooves, and tone scales, Real-time recording via pads, MIDI or USB-MIDI, Intuitive operation via OLED display, Four push encoders and 128 RGB pads for pattern programming, Editing functions: Copy, paste, undo, redo, Eight CV and eight gate outputs (3.5 mm mini jack), freely assignable to sequencer tracks, modulation tracks, and LFOs, CV range: -3 V to +5 V, Voltage: 5 V - 10 V, Operation as MIDI-to-CV interface possible, Transmission of 32 MIDI channels via USB-MIDI, Transmission of 96 MIDI channels via optional OXI Split MKII Box (Art. #617334#, not included), Bluetooth 5.0 MIDI for wireless connection with iOS, macOS, Android and Windows devices, MIDI input/output: 3.5 mm TRS mini jack, type A, Clock input and output: 3.5 mm TRS mini jack, USB-C port for USB MIDI and power supply, Connection for optional OXI Pipe MKII Eurorack module (Art. #617333#, not included), Built-in lithium-polymer battery for up to eight hours of operation, Sturdy aluminium housing, Dimensions (W x D x H): 375 x 130 x 30 mm, Weight: 950 g, Including transport case, USB cable and TRS-DIN MIDI adapter
OXI Instruments One MKII Nostalgia, Performance Step Sequencer, Eight independent sequencers, each with six selectable modes: Mono, Poly (up to seven voices), Chord (up to eight voices), Multitrack (eight tracks), Stochastic, Matrix (regenerative sequencer), Available in each mode: adjustable velocity, note length, probability, glide, ratchets and micro-timing per step, Random, Euclidean and pattern generator, Two LFOs with multiple waveforms per sequencer, Start step, end step, running direction, clock divider/multiplier and transposition can be edited in real-time per sequencer, Eight modulation tracks per sequencer, programmable to internal parameters or MIDI controllers, Programmable arpeggiator, Keyboard mode with selectable scale, Max. 128 steps per sequencer pattern, microSD card slot for unlimited storage space for patterns, projects, songs, grooves, and tone scales, Real-time recording via pads, MIDI or USB-MIDI, Intuitive operation via OLED display, Four push encoders and 128 RGB pads for pattern programming, Editing functions: Copy, paste, undo, redo, Eight CV and eight gate outputs (3.5 mm mini jack), freely assignable to sequencer tracks, modulation tracks, and LFOs, CV range: -3 V to +5 V, Voltage: 5 V - 10 V, Operation as MIDI-to-CV interface possible, Transmission of 32 MIDI channels via USB-MIDI, Transmission of 96 MIDI channels via optional OXI Split MKII Box (Art. #617334#, not included), Bluetooth 5.0 MIDI for wireless connection with iOS, macOS, Android and Windows devices, MIDI input/output: 3.5 mm TRS mini jack, type A, Clock input and output: 3.5 mm TRS mini jack, USB-C port for USB MIDI and power supply, Connection for optional OXI Pipe MKII Eurorack module (Art. #617333#, not included), Built-in lithium-polymer battery for up to eight hours of operation, Sturdy aluminium housing, Dimensions (W x D x H): 375 x 130 x 30 mm, Weight: 950 g, Including transport case, USB cable and TRS-DIN MIDI adapter
Source Audio One Series Nemesis Delay ADT, Effect Pedal for Electric Guitar, Delay, With 26 delay engines: 12 integrated delay engines and a further 14 delays via the compatible Neuro mobile app (available for iOS, Android, Mac and PC), 56-bit signal path and 24-bit delay line processing, Eight presets accessible via the onboard controls, 128 presets recallable via MIDI, Analog dry through signal path, Universal bypass, Controls: Time, Feedback, Mod, Rate, Intensity, Mix and Delay Engine selection, Toggle switch for switching between quarter, dotted eighth or triplet subdivisions of the tap tempo, "Hold" function for infinite repetitions, Preset Bank-Select button, Footswitch: Effect Bypass, Tap Tempo, Switch for selecting the external control device (expression pedal or footswitch), Status LED, Tap-Tempo LED, Input and output: 6.3 mm jack, MIDI IN and MIDI THRU connectors, Mini USB port for PC connection (Windows and Mac compatible), Footswitch or expression pedal input: 6.3 mm TRS jacks, Source audio control input to connect to compatible source audio devices: 3.5 mm mini jack, Power consumption: 200 mA, Power supply via 9 V DC mains adapter unit, 300 mA, centre negative (not included), Brushed, anodised aluminium housing, Dimensions (L x W x H): 114 x 114 x 51 mm, Weight: 450 g, Includes USB Type A to USB Type B cable and 3.5 mm to 6.3 mm TRS cable for connecting mobile devices
EarthQuaker Devices One to Four Splitter, Signal Buffer / Splitter, Prevents sound loss with long cable runs or in signal chains with many true bypass pedals, Signal is split internally and distributed to four separate outputs, Input impedance: 1 MOhm, Output impedance: 1 Ohm, Status LED, Metal housing, 6.3 mm mono jack input, 4x 6.3 mm mono jack output, Power supply via optional 9 V DC power supply unit, 2.1 x 5.5 mm barrel connector, centre negative, Current consumption: 15 mA, Dimensions (L x W x H): 121 x 64 x 38 mm, Weight: 230 g, Handmade in USA@+*Note:* Battery operation not supported.
Marimba One Vibraphone 9001 One Vibe Silver, Vibraphone, One Vibe Series, A = 443 Hz, With motor, Silver plates made of a special alloy, 3 Octaves, With castors
Marimba One Vibraphone 9002 One Vibe Gold, Vibraphone, One Vibe Series, A = 443 Hz, With motor, Gold bars made of a special alloy, 3 Octaves, With castors