Hardware

Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.

  • NT3

    Rode NT3 is a microphone.

  • NT5 MP

    Rode NT5 Matched Pair, Matched Microphone Pair, True condenser microphone with gold sputtered 1/2” capsule, Cardiod characteristic, Frequency range: 20 - 20.000 Hz, Output impedance: 100 Ohm, Maximum SPL: 143 dB, Max. output level: +13.9 dBu, Very low noise, Requires 48V phantom power, Dimensions (H x W x D): 118 x 20 x 20 mm, Weight of each mic: 101 g, Finish: Satin nickel, Incl. 2 x foam windscreen WS5, 2 x RM5 stand adapter and ZP1 zip pouch

  • NT5 S

    Rode NT5 S, True Condenser Microphone, With gold sputtered 1/2" diaphragm, Cardioid, Satin nickel finish, Very low noise, Full frequency response, Active electronics: JFET impedance converter, Frequency range: 20 Hz to 20 kHz, Sensitivity: -38 db at 1v / Pa + -2 dB, Maximum output: +13.9 dBu, Dynamic range: >128 dB, Signal to noise ratio: 78 dB, Weight: Microphone 100g, Phantom power required (18V - 48V), Including windshield, tripod adapter and case, Including 10 years manufacturer warranty

  • NT55

    Rode NT55, Small Diaphragm Condenser Microphone, With 1/2" cardioid capsule and changeable capsule with omnidirectional polar pattern, High-pass filter and pre-attenuation can be switched in three steps, Satin nickel-plated metal housing, Includes omnidirectional capsule NT45-O, stand clamp and metal box, Includes 10 years manufacturer's warranty

  • NT55 MP

    Rode NT55 MP, Stereo Set Small Diaphragm Condenser Microphones, With 1/2’ kidney capsule and interchangeable omnidirectional capsule, Strictly selected stereo pair, High-pass filter and pre-attenuation switchable in three stages, Satin nickel-plated metal housing, Frequency range: 20 - 20,000 Hz, 156 dB SPL (with max. pre-attenuation), 15 dBA self-noise, 100 Ohm output impedance, Weight: 113 g per microphone, Length: 145 mm, 20 mm diameter, Includes 2x stand clamp, 2x windscreen, NT45-O ball capsule and ZP1 zip bag

  • NTG1

    Rode NTG1, Shot Gun Microphone, Ideally for film/ TV/ video, Polar pattern: super cardioid, XLR Connector, Requires phantom power P48 (44 - 52 V), Frequency range: 20 - 20,000 Hz, @ 80 Hz 12 dB/octave,, Max. SPL: 139 dB, Output impedance: 50 Ohm, Dimensions: 219 x 22 x 22 mm, Weight: 105 g, Incl. windshield and clamp

  • NTG2

    Rode NTG2, Shot Gun Microphone, Ideally for film/ TV/ video, Polar pattern: super cardioid, XLR Connector, Operated with 1.5 V alkaline battery or 48 V phantom power, Frequency range: 20 - 20.000 Hz, Max. SPL: 131 dB, Output impedance: 250 Ohm, Dimensions: 280 x 22 x 22 mm, Weight: 161 g, Incl. windshield and clamp

  • NTG3

    Rode NTG3, Studio Shotgun Microphone, Polar pattern: super-cardioid, Frequency range: 40 - 20.000 Hz, Dynamic range: 117 dB, Maximum sound pressure level: 130 dB @ 1 KHz, Required power supply: Phantom power 48V (4.3 mA), Connector: 3-pin XLR, Dimensions: 255 x 19 x 19 mm, Weight: 163 g, Colour: Silver, Includes water and dust resistant aluminum cylinder for storage of the NTG-3, windscreens and RM5 microphone clip, Optional: elastic mounts SM3, SM4 or SM5 (not included)

  • NTG3B black

    Rode NTG3B black, Studio Shotgun Microphone, Polar pattern: Super-cardioid, Frequency range: 40 Hz - 20 kHz, Dynamic range: 117 dB, Maximum sound pressure level: 130 dB @ 1 KHz, Required power supply: Phantom power 48V (4.3 mA), Connector: 3-pin XLR, Dimensions: 255 x 19 x 19 mm, Weight: 163 g, Colour: Black, Includes water and dust resistant aluminum cylinder for storage of the NTG-3, windscreen and RM5 microphone clip

  • NTG4

    Rode NTG4, Directional Condenser Microphone, Directional characteristic: Super-cardioid, Robust and weather-proof, High sensitivity: 25 mV, Low inherent self-noise: 16 dBA, Phantom power: 12 V, 24 V, 48 V, Electronic switch for high pass filters: 75 Hz, Attenuation (-10 dB) and presence boost, Length: 22.5 cm, Diameter: 2.2 cm, Weight: 126 g, Incl. RM5 stand mount, foam windscreen WSNTG4

  • NTG4+

    Rode NTG4+, Shotgun Condenser Microphone, Polar pattern: super cardioid, Internal lithium battery, Up to 150 hours operating time, Charging time under 2 hours, Charging via micro USB, Robust and climate proof, High sensitivity: 25 mV, Low inherent noise: 16 dBA, Phantom power: 12 V, 24 V, 48 V, Electric buttons for high pass filter: 75 Hz, Pre-attenuation (-10 dB) and presence boost, Length: 27.8 cm, Diameter: 2.2 cm, Weight: 176 g, Incl. clamp RM5, foam wind shield WSNTG4, micro USB cable

  • NTG5 Kit

    Rode NTG5 Kit, Shotgun Condenser Microphone, HF Technology with vacuum-sealed electronics (Conformal Coating), Extremely climate-resistant and insensitive to interference, Polar pattern: Supercardioid, Maximum sound pressure level: 130 dB (1.0% THD), Equivalent noise level: 10 dBA, Frequency response: 80 - 20000 Hz (±3 dB), Frequency response: 20 - 20000 Hz, Sensitivity: 66 mV/Pa, Output impedance: 25 Ohm, Requires +48 V Phantom power 2 mA, Aluminium housing, Dimensions (length x diameter): 203 x 19 mm, Weight: 76 g, Includes PG2-R pistol grip with Rycote boom mount, PG2-R Pro special cable, WS10 foam windscreen and WS10 deluxe windscreen, RM5 microphone clamp and ZP1 carrying case

  • NTG8

    Rode NTG8, Shotgun Microphone, Long design, Polarised 1/2" super-cardioid capsule in high frequency technology, Directivity increased by interference principle, Frequency range: 40 Hz - 20 kHz, Equivalent noise level: 8 dBA, Dynamic range: 116 dB, Maximum sound pressure level: 124 dB, Requires phantom power 44 - 52 V (min. 2.5 mA), XLR connector, Dimensions (diameter x length): 19 x 559 mm, Weight: 345 g, Foam windshield, elastic mount and aluminium transport cylinder included

  • NTH-100

    Rode NTH-100, Studio Headphones, Robust headphones ideal for musicians, sound engineers, podcasters, filmmakers etc., Dynamic, Closed-back design, Circumaural, Passive noise cancelling, 40 mm neodymium drivers selected in pairs, Robust spring steel headband, Adjustable ear cups with FitLok locking system, Memory foam ear and headband cushions covered with Alcantara, Ear pads with cooling CoolTech gel, Frequency range: 5 – 35,000 Hz, Impedance: 32 Ohm, Sensitivity: 110dB, Max sound pressure: 126 dB, Single-sided cable routing (left or right connection possible), 3.5 mm Jack sockets with bayonet locking mechanism, Detachable straight 2.4 m connection cable (3.5 mm TRS jack), Weight: 344 g, Includes jack adapter (3.5 mm to 6.3 mm jack), carrying pouch and cable identification rings (blue, green, orange, pink)

  • NTH-100 W

    Rode NTH-100 W, Studio Headphones, Robust headphones ideal for musicians, sound engineers, podcasters, filmmakers etc., Dynamic, Closed, Circumaural, Passive noise cancelling, 40 mm neodymium drivers selected in pairs, Robust spring steel headband, Adjustable ear cups with FitLok locking system, Memory foam ear and headband cushions covered with Alcantara, Ear pads with cooling CoolTech gel, Frequency range: 5 – 35,000 Hz, Impedance: 32 Ohm, Sensitivity: 110 dB, Max sound pressure: 126 dB, Single-sided cable routing (left or right connection possible), 3.5 mm Jacks with bayonet locking mechanism, Detachable straight 2.4 m connection cable (3.5 mm TRS jack), Weight: 344 g, Colour: White, Includes jack adapter (3.5 mm to 6.3 mm jack), carrying pouch and cable identification rings (blue, green, orange, pink)

  • NTH-100M

    Rode NTH-100M, Over-Ear Headset, Studio headphones Rode NTH-100 with boom microphone Rode NTH-MIC, Robust headphones ideal for musicians, sound engineers, podcasters, filmmakers etc., Dynamic, Closed design, Circumaural, Passive noise cancelling, 40 mm Neodymium drivers selected in pairs, Robust spring steel headband, Adjustable ear cups with FitLok closure system, Memory foam ear and head pads covered with Alcantara, Ear pads with cooling CoolTech gel, Frequency response: 5 - 35,000 Hz, Impedance: 32 Ohm, Jack sockets with bayonet locking mechanism, Rode NTH-MIC with condenser microphone capsule, Clear speech transmission with natural sound character, Max. SPL (sound pressure level): 106 dB, Microphone frequency range: 20 - 20,000 Hz, Weight: 349 g, Includes detachable 2.4 m straight connection cable (3.5 mm TRRS jack), splitter cable (TRRS coupling to 2x TRS jack), jack adapter (3.5 mm to 6.3 mm jack), carrying bag and cable identification rings (blue, green, orange, pink)

  • NTH-50

    Rode NTH-50, Headphones, Closed back, Supra-aural, Dynamic, Single-cable routing (left or right connection option), 3.5 mm TRRS jacks with bayonet lock, Memory foam ear pads covered with artificial leather, Frequency response: 5 - 35,000 Hz, Impdeance: 32 ohm, Maximum sound pressure: 124 dB SPL, THD: <0.03% (500 Hz), <0.2% (100 Hz), Weight: 220 g, Can be retrofitted to the headset (with optional NTH-MIC headband microphone), Includes 1.7 m special cable (coiled and straight) with 3.5 mm TRS plug, 3.5 mm to 6.35 mm screw adapter, coloured identification rings and carrying bag

  • NTH-MIC

    Rode NTH-MIC, Headset Microphone, Pluggable boom microphone for NTH-100 headphones, Ideal for broadcast, streaming, content creation and gaming applications, Condenser microphone capsule, Linear frequency response with smooth presence enhancement, Natural sound character, Polar pattern: omnidirectional, Limiting sound pressure level: 106 dB, Frequency response: 20 - 20,000 Hz, Sensitivity: 12.59 mV, Connector: TRRS (3.5 mm jack) with bayonet lock, Dimensions (W x D x H): 123 x 40 x 17 mm, Weight: approx. 5 g, Incl. 2.4 m connection cable (3.5 mm TRS jack) and splitter cable (TRRS jack to 2x TRS jack)

  • NTK

    Rode NTK incl. Shock Mount, Valve Condenser Studio Microphone, Gold plated large diaphragm, Very low noise level, Wide frequency range, Hand-selected twin-triode valve, Incl. power supply and RM2 microphone flange with ring holder

  • NTK-37

    Nux NTK-37, USB MIDI Keyboard Controller, With 37 semi-weighted standard keys with aftertouch, Simple and seamless integration into any common DAW, Convenient transport and mixer control, Touchpad for controlling the mouse pointer, Easy controller assignment via editor software, Integrated arpeggiator with 7 playback patterns, Smart Scale with 16 scales, 5 Different curves for velocity sensitivity as well as fixed values at 64 or 127, 8 DAW presets and one user preset, 16 Scene memories, 9 Assignable faders, Pitch bend and modulation wheel, Sustain pedal input: 6.3 mm jack, USB to host, MIDI output: 5-pin DIN, Dimensions: 744 x 211 x 71mm, Weight: 4.0 kh, Includes Steinberg Cubase LE

  • NTK-49

    Nux NTK-49, USB MIDI Keyboard Controller, With 49 semi-weighted standard keys with aftertouch, Simple and seamless integration into any common DAW, Convenient transport and mixer control, Touchpad for controlling the mouse pointer, Easy controller assignment via editor software, Integrated arpeggiator with 7 playback patterns, Smart Scale with 16 scales, 5 Different curves for velocity sensitivity as well as fixed values at 64 or 127, 8 DAW presets and one user preset, 16 Scene memories, 9 Assignable faders, Pitch bend and modulation wheel, Sustain pedal input: 6.3 mm jack, USB to host, MIDI output: 5-pin DIN, Dimensions: 910 x 211 x 74 mm, Weight: 5.0 kg, Includes Steinberg Cubase LE

  • NTK-61

    Nux NTK-61, USB MIDI Keyboard Controller, With 61 semi-weighted standard keys with aftertouch, Simple and seamless integration into any common DAW, Convenient transport and mixer control, Touchpad for controlling the mouse pointer, Easy controller assignment via editor software, Integrated arpeggiator with 7 playback patterns, Smart Scale with 16 scales, 5 Different curves for velocity sensitivity as well as fixed values at 64 or 127, 8 DAW presets and one user preset, 16 Scene memories, 8 Velocity-sensitive pads with A/B bank switching for controlling 16 notes or controller values, 9 Assignable faders, 8 Programmable knobs, Pitch bend and modulation wheel, Sustain pedal input: 6.3 mm jack, USB to host, MIDI output: 5-pin DIN, Dimensions: 1074 x 211 x 74 mm, Weight: 5.5 kg, Includes Steinberg Cubase LE

  • NTMB+F 3-Band Bass Preamp

    Bartolini NTMB+F 3-Band Bass Preamp, Preamp Set for Electric Bass, Pre-wired 3-band preamp set for electric bass with 5 potentiometers, Toggle switch and active/passive switching, Clear, transparent sound with extremely low distortion, Switchable mid frequency for midrange, Configuration: NTMB+F, 1 Volume potentiometer with push/pull function, 1 Blend potentiometer, 1 Mids potentiometer, 1 Treble potentiometer, 1 Bass potentiometer, 1 Mids switch, 250/500/800 Hz mid-frequency switching via 3-way switch, Active/passive (bypass) switching via push/pull switch on the volume potentiometer, Adjustable gain up to 12 dB, Pre-wired for 9V operation (including output jack and battery clip), Supports 18V operation for 6 dB additional headroom (second battery clip included), Power supply via 1 x 9V / 2 x 9V (18V) battery (not included), Module dimensions (L x W x H): 44.7 x 25.9 x 13.7 mm

  • NTMB+F 3-Band Bass Preamp 4

    Bartolini NTMB+F 3-Band Bass Preamp 4, Preamp Set for Electric Bass, Pre-wired 3-band preamp set for electric bass with 4 potentiometers and active/passive switching, Clear, transparent sound with extremely low distortion, Switchable mid frequency for midrange, Configuration: NTMB+F, 1 Volume potentiometer with push/pull function, 1 Blend potentiometer, 1 Mids potentiometer with push/pull function, 1 Treble/Bass potentiometer (stacked), 250/800 Hz mid frequency switching via push/pull switch on the mids potentiometer, Active/passive (bypass) switching via push/pull switch on the volume potentiometer, Adjustable gain up to 12 dB, Pre-wired for 9V operation (including output jack and battery clip), Supports 18V operation for 6 dB additional headroom (second battery clip included), Power supply via 1 x 9V / 2 x 9V (18V) battery (not included), Module dimensions (L x W x H): 44.7 x 25.9 x 13.7 mm, Includes ring and center knob for concentric (stacked) potentiometer