Hardware

Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.

  • M290 Phase 95

    MXR M290 Phase 95, Effect Pedal, Phaser, Phase 45 (2-stage) and Phase 90 (4-stage) circuits in mini pedal format, Two switchable phaser styles (vintage / modern), True bypass, Speed control, Script switch to activate script mode for more subtle phasing, 45/90 switch to select between Phase 45 and Phase 90 mode, Bypass footswitch, Status LEDs, Input: 6.3 mm jack, Output: 6.3 mm jack, Power supply via 9 V DC power supply (Dunlop ECB 003, not included) with 2.1 x 5.5 mm barrel connector, polarity (-) inside, Power consumption: 8 mA, Metal housing, Dimensions (L x W x H): 90 x 40 x 55 mm, Weight: approx. 130 g@+*Note:* Battery operation is not supported.

  • M291 Dyna Comp Mini

    MXR M291 Dyna Comp Mini, Effect Pedal, Compressor, Classic MXR Dyna Comp sound in a compact MXR mini housing, The rare CA3080 'Metal Can' IC allows a quieter operation without noise, higher transparency and a wider dynamic range, True bypass, Controls for output, sensitivity, Bypass footswitch, LED status, Input: 6.3 mm jack, Output: 6.3 mm jack, Power supply via 9 V DC power supply unit (Dunlop ECB 003, not included in the delivery) with a 2.1 x 5.5 mm hollow plug, polarity (-) inside, Power consumption: 4 mA, Metal housing, Dimensions (L x W x H): 90 x 40 x 55 mm, Weight: approx. 160 g@+*Note:* battery operation is not supported.@+@+

  • M296 Classic 108 Fuzz Mini

    MXR M296 Classic 108 Fuzz Mini, Effect Pedal for Electric Guitar, BC108 Fuzz Face Circuit in the MXR Mini Housing, Original turquoise Fuzz Face Hammertone finish, True bypass, Controls for volume and fuzz, Buffer switch, Bypass footswitch, Status LED, Metal housing, Input and output: 6.3 mm mono jack, Power supply via optional 9 V DC power supply, 2.1 x 5.5 mm coaxial connection, polarity (-) inside) (not included), Power consumption 2.2 mA, Dimensions (L x W x H): 90 x 40 x 55 mm, Weight: 130 g@+*Note:* Battery operation not supported.@+@+*Note:* Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years.

  • M299 Copy Mini Analog Delay

    MXR M299 Copy Mini Analog Delay, Effects Pedal, Analogue delay, Carbon Copy / Carbon Copy Bright switchable, Controls: True Bypass, Delay, Rain and Mix, Internal trim pots for width and speed, Mod switch for activating the modulation, Bright switch to choose between Original and Bright Mode Bypass Footswitch, 6.3 mm Mono jack input / output, Mini housing format, Status LEDs, Power supply connection: Barrel connector 2.1 x 5.5 mm (negative polarity inside), Power supply via 9 V DC mains adapter (not included in delivery), Power consumption: 26 mA, Dimensions (W x D x H): 40 x 90 x 55 mm, Weight: 130 g, Includes power supply@+*Note:* Battery operation is not supported.

  • M2C-L

    Lectrosonics M2C-L, Active Antenna Combiner, Combines up to 8 RF output signals from transmitters to feed a single antenna, Frequency range: A1B1 (470 to 614 MHz), Highly resilient components minimise intermodulation products, Up to 100 mW input on each port, Efficient architecture for low power consumption (60 W), USB port for firmware updates, Front LEDs indicate active channels, 8 BNC inputs, 50 ohms, BNC output 50 Ohm, Dimensions (W × H × D): 483 × 45 × 241 mm, Weight: 2.381 g

  • M2ra

    Lectrosonics M2ra, Wireless Receiver with Digital RF, 24 bit digital audio, IR (infrared) port for quick setup, High-resolution colour LCD, Stereo or mono operation, Frequency range: 10 Hz - 12 KHz, +0, -3dB, Low latency (1.4 ms) with analogue inputs, Frequency range (A1B1): 470.100 - 614.375 MHz, IFB mode, 3.5 mm jack for earphones, Dimensions (H x W x D): 90 x 603 x 158 mm, Weight: 159 g, Includes 2 M2R housing insulation pads, 035 Allen key, belt clip

  • M2T

    Lectrosonics M2T, IEM Wireless Transmitter, IEM (wireless monitor) transmitter with digital RF transmission, Frequency range A1B1: 470.100 - 614.375 MHz, 24-bit digital audio, Audio frequency range: 10–11.5 kHz, 2 independent stereo audio transmissions per 1/2 RV housing, USB port for firmware updates, Fully compatible with Dante, IR (infrared) port for quick setup, up to 50 mW, Compatible with Wireless Designer software, 4 x combo XLR/6.3 mm jack, Dante Ultimo interface via dual RJ45 connectors, 6.3 mm headphone output, 9.5" metal housing, Dimensions (H x W x D): 44.45 x 212.7 x 196.8 mm, Weightt: 998 g@+*Included in delivery:*, USB Cable, Rear mount M2T / M4T, Front mount M2T / M4T, Rack flange mount, Rack handle RMP2T, 4 x SCR10 cap screw, 4 x rubber feet (large), Hex key L, Hole plug, 2 x A500RA20 antenna, DCR15 / 4AU DC power supply unit

  • M3

    Rode M3, Condenser Microphone, Polar pattern: cardioid, Ideal for recording strings, choir and acoustic guitars, Frequency range: 40 - 20,000 Hz, 130 dB SPL, 21 dBA Inherent noise, Output impedance: 200 Ohm, 48V Phantom power or battery power (9 V battery), Robust metal housing, Elastic mounted 1/2" capsule, Switchable high pass filter, Switchable preattenuation (-10 dB/ -20 dB), Length: 225 mm, Diameter: 33 mm, Weight: 360 g, Incl. wind shield and clamp

  • M3 MicTrak

    Zoom M3 MicTrak, Stereo Shotgun Recorder, Stereo M/S microphone (polar pattern: supercardioid) with 2 selectable recording angles (90° / 120°) and mono mode, No levelling required due to 32 bit float converter technology, 32 Bit / 48 kHz (WAV), Recording media: microSDHC cards up to 32 GB, microSDXC cards up to 1 TB (memory card not included), Line output for direct connection to camera: 3.5 mm stereo jack, Headphone output: 3.5 mm stereo jack, Recording and streaming via USB to Mac, PC, iOS and Android, Power supply via 2x AA batteries (not included) or USB bus power, Dimensions (L x W x H): 200 x 70 x 41 mm, Weight: 91 g, Includes Quick Start Guide, windscreen, 3.5 mm stereo jack cable and shock mount with flash shoe adapter

  • M3 PRO

    Swiff Audio M3 PRO, Digital 2.4 GHz Wireless Microphone Set for Cameras and Smartphones, Set of two clip-on microphones and a compact 2-channel receiver, ideal for mobile applications such as interviews, micro video recordings and vlogging, Compact design with LED display on all three components showing the battery level, Latency: < 5 ms, Distortion-free signal transmission, Intelligent noise reduction, Frequency response: 20 Hz – 20 kHz (internal microphone), Sampling rate: 24 Bit / 48 kHz, Range: Up to 50 m, Compatible with smartphones, Mac/PC and cameras (transmitters and receiver), Colour: Grey@+*Transmitter:*, Can be used with the integrated microphone or with external microphones (3.5 mm connector), Integrated battery with USB-C charging port, Operating time: Up to 8 hours, 3.5 mm TRS jack output for real-time monitoring@+*Receiver:*, 3.5 mm TRS jack output for recording, 3.5 mm TRS headphone jack, USB-C analogue output for headphone monitoring, Integrated battery with USB-C charging port, Integrated clip for fastening to a belt or clothing@+*Accessories included:*, 1x 3.5 mm TRS to 6.3 mm TS instrument adapter, 1x 3.5 mm TRS to TS spiral cable, 1x 3.5 mm to TRRS spiral cable, 1x 3-way USB-C multi-device charging cable, 1x USB-C to USB-C cable, 2x fur windshield

  • M30

    Earthworks Audio M30 is a microphone.

  • M30 Gen2

    Earthworks Audio M30 Gen2, Condenser Microphone, Polar pattern: Omnidirectional, Frequency range: 5 - 30.000 Hz (+/- 1 dB), Sensitivity (1 kHz): -40 dBV/Pa (10 mV/Pa) +/- 2dB, Low frequency cutoff (-3 dB): = 3 Hz, High frequency cutoff (-3 dB): = 40.000 Hz, Max. SPL: 140 dB SPL at 48 V, 133 dB SPL at 12 V, Requires 12/48 V phantom power, Dimensions (L x D): 177.8 x 21.8 mm, Weight: 140 g, Includes bag, calibration table, MC1 microphone clip, OMW2 windscreen, ADP1 calibration adapter and microphone stand thread adapter

  • M300 Reverb

    MXR M300 Reverb, Effect Pedal for Guitar, Digital reverb with 6 modes, Controller for Tone, Decay and Mix, Bypass foot-switch, Internal Mono-stereo switch, True Bypass and optional Trails bypass, Status LED, 3 Bi-colour LEDs for display mode, 100% Analog Dry Path, 6.3 mm Stereo TRS input / output, Can be used as mono with normal instrument cables, 6.3 mm Expression pedal / CV input, Power consumption: 240 mA, Including power adapter

  • M303 Clone Looper

    MXR M303 Clone Looper, Looper Effects Pedal, Up to 6 minutes of recording time, Stores recorded loops even when the pedal is off, Change the speed of recorded loops to double-speed or half-speed, or reversing them, Unlimited overdubs, Sampling rate: 44.1 kHz, Storage sample rates up to 88.2 kHz, True/Buffered bypass (switchable), Volume control, REC/DUB and PLAY/STOP footswitch, Status LEDs, Metal housing, 6.3 mm Mono jack input/output, 6.3 mm CTR input for connecting a MXR M199 tap tempo footswitch, 6.3 mm EXP input for connecting a Dunlop DVP volume (X) pedal, Tap functionality: 1x tap for loop speed, 3 sec tap loop forward/backward and 5 sec + REC for clear loop quietly, Powered via the included 9V DC power supply with 2.1 x 5.5 mm coaxial power connector, negative polarity (-) inside, Power consumption: 225 mA, Dimensions (L x W x H): 64 x 111 x 49 mm, Weight: 0.31 kg, Includes a Dunlop ECB003 power supply @+*Note:* Battery operation is not supported.@+@+@+*Note:* Register your product at https://shop.warwick.de/en/warrantyregistration to extend the warranty to 4 years.@+@+

  • M305 Multi Mode Tremolo

    MXR M305 Multi Mode Tremolo, Effect Pedal for Electric Guitar, Tremolo, 6 Selectable tremolo modes: MXR, BIAS, REVO, OPTO, SQR, HARM, Tap Tempo, Expression pedal can change knob settings, Switchable mono or stereo input, Stereo output via TRS split cable or CTR jack, Switchable envelope mode, True bypass / buffered bypass (switchable), Controls for speed, gain, depth, CTR slide switch on the side determines the function of the CTR socket, Internal DIP switch for mono / stereo input mode, Bypass footswitch, Status LED, Metal housing, 6.3 mm Stereo jack input / output (TRS), 6.3 mm Stereo jack CTR socket, Power supply via 9 V DC power supply unit (e.g. Dunlop ECB 003) with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply unit not included in delivery), Power consumption: 190 mA, Dimensions (L x W x H): 110 x 65 x 50 mm, Weight: approx. 250 g@+*Note:* Battery operation is not supported.@+@+*Note:* Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

  • M306 Poly Blue Octave

    MXR M306 Poly Blue Octave, Effect Pedal for Electric Guitar, The MXR Poly Blue Octave combines modern and classic pitch-shifting styles with fuzz and modulation, making it the ultimate octave pedal for sound tinkerers and tone seekers, Controls: Dry, SUB-1, SUB-2, Mod, Oct+1, Oct+2, Push buttons: Fuzz, Mono, LED: Effect On, Foot switch: Effect bypass, Input and output: 6.3 mm jack, Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside, Power consumption: 265 mA, Power supply via 9 V DC mains adapter (included)

  • M32 Live

    Midas M32 Live, Digital Mixing Console, 32 XLR Inputs with Midas preamps, 16 XLR outputs, 25 Mix buses, 8 DCA and 6 Mute groups, 8 Stereo effects, 40-Bit floating point DSP, 25 x 100 mm Motor fader, 7" Colour display, 32x32 USB Audio Interface, DAW remote control, Wireless Remote Control via IOS App, Dimensions: 891 x 607 x 256 mm, eight: 24.5 kg, Includes DN32-Live Recording and Playback Card, Suitable case: Article Nr. #454375# and Article Nr. #347869# (not included)

  • M32C

    Midas M32C, Digital Rack Mixer, 40 Input channels, 25 Bus mixers, 32 x 32 Audio interfaces with USB, iPad and iPhone apps for remote control, Stereo 6.3 mm jack output for monitor, 6 Matrix buses with insert, Parametric 6-band EQ, 8 DCA and 6 Mute Groups, Virtual FX rack, Network remote control via Ethernet, USB Type A for saving shows, stereo recording and for system updates, MIDI in / out, Design: 19"/1U, Dimensions: (W x D x H) 483 x 300 x 50 mm, Weight: 3.5 kg

  • M32R Live

    Midas M32R Live, Digital Mixing Console, 16 Mic Inputs, 8 XLR outputs, 8 DCA and 6 Mute groups, 17 Motor fader, 5" Colour display, 32x32 USB Audio Interface, 25 Mix Buses, DAW Remote control, Wireless Remote Control via IOS App, Dimensions (W x D x H): 478 x 617 x 208 mm, Weight: 14.3 kg, Includes rack-mounts

  • M3S Stereo Mixer

    Weston Precision Audio M3S Stereo Mixer, Eurorack Module, 3 Channels, Each with level control and stereo input (right input normalised to left input), Stereo output, Suitable for audio and CV signals (selectable via jumper), Power requirement: 26 mA (+12 V) / 26 mA (-12 V), Width: 6 HP, Depth: 21 mm

  • M4

    MOTU M4, Four-Channel USB-C Audio Interface, 24 bit / 192 kHz AD/DA converter, Two microphone preamplifiers with +48 V phantom power individually switchable, Two line inputs: XLR/6.3 mm jack combo (switchable to Hi-Z instrument input), Two balanced line inputs: 6.3 mm jack, Four balanced line outputs: 6.3 mm jack, Four unbalanced outputs: RCA, Stereo headphone output: 6.3 mm jack, MIDI I/O, Loopback function, LCD level indicator, System requirements: macOS 10.11 or later, Windows 10 or later, iOS 9 or later (with adapter kit and active USB hub), Includes MOTU Performer Lite, Ableton Live Lite and over 6 GB of loops and samples

  • M4 Mahogany EQ

    Seagull M4 Mahogany EQ, Diatonic Acoustic 4-String Instrument, Top: Solid mahogany, Neck: Maple, Back and sides: Maple, Scale: 527 mm (20.75"), Nut width: 32.5 mm (1.280"), Pickup: Seagull preamp, Tusq Graphtech bridge, Compensated Tusq Graphtech nut, Open geared machine heads, Colour: Natural / Semi-gloss, Made in Canada

  • M4 Motor Fader Unit

    Der Mann mit der Maschine M4 Motor Fader Unit, Eurorack Module, Expands the Droid Master (Art.#542913#) by 4 motorised faders (60 mm), each with status LED and button, Possible applications: output of control voltages, step sequencer, mixer for audio and CV signals, ADSR envelopes and much more, Several fader levels with different functions can be defined, Haptic feedback programmable with discrete steps or variable resistance (applications: Pitch-bender, selection of notes of a scale, transposition of a sequence, direct selection of waveforms or presets, etc.), Current consumption: 350mA (+12V) / 0mA (-12V), Width: 14 HP, Depth: 42 mm