Hardware

Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.

• LCT 440 PURE stereo pair

  Lewitt LCT 440 PURE stereo pair, Large Diaphragm Condenser Microphone Set, Matched microphone pair, 1" true condenser microphone capsule, Polar pattern: Cardioid, Frequency range: 20 - 20000 Hz, Dynamic range: 133 dB A, Max SPL 0.5 % THD: 140 dB, Sensitivity: 27.4 mV/Pa (-31.2 dBV/Pa), Inherent-noise: 7 dB(A), Robust zinc die-cast housing, Gold-plated 3-pin XLR connector, Dimensions (W x H x D): 138 x 52 x 36 mm (microphone), Weight: 310 g (per microphone)@+*Set includes:*, 2x LCT 50 PSx magnetic pop filter, 2x LCT 40 Wx windscreen, 2x LCT 40 SH microphone shock mount, 2x DTP40 Mts microphone mount, 1x DTP 40 Lb transport bag, 1x transport case

• LCT 441 FLEX

  Lewitt LCT 441 FLEX, Large-diaphragm condenser microphone, 8 Directional characteristics to choose from, 5 Front characteristics: omnidirectional, wide cardioid, cardioid, supercardioid, and figure-8, Gold-plated 25.4 mm capsule, Dynamic range: 134 dBA, Max. SPL (sound pressure level) (0.5% THD): 140 dB, Robust zinc diecast housing, Gold-coated 3-pin XLR plug, Dimensions: 138 x 52 x 36 mm, Weight: 310 g, Incl. DTP 40 Lb leather case, LCT 40 SH microphone shock mount, LCT 40 PSx of magnetic pop filter, LCT40 Ws windshield

• LCT 540 S

  Lewitt LCT 540 S, Large Diaphragm Condenser Microphone , Polar pattern: Cardioid , Signal-to-noise ratio: 90 dB (A), Max. sound pressure level: 136 dBSPL, 0 dB pre-attenuation, Sensitivity: 41 mV / Pa, -28 dBV / Pa, Pad switchable in three steps: 0 dB, -6 dB and -12 dB, Low cut switchable in three steps: linear, 80 Hz (6 dB / octave) and 160 Hz (6 dB / octave), Dimensions: 158 x 52 x 36 mm, Weight: 371 g

• LCT 640 TS

  Lewitt LCT 640 TS, Large Diaphragm Condensor Microphone, Pattern: Cardioid, omnidirectional, figure 8, broad cardioid and supercardioid, Via the POLARIZER plug-in (available on the manufacturer website), change the material you have already recorded dynamically by adjusting the polar pattern, add or subtract room, and even turn your microphone by 180°, Gold-coated capsule, Neutral frequency response, 4 Low-cut and pre-attenuation settings, Robust metal construction, Frequency range: 20 - 20000 Hz, Dynamic range: 121 dB-A, Max SPL 0.5% THD: 132 dB, Impedance:> 120 ohms, Dimensions: 158 x 52 x 36 mm, Weight: 425 g, Includes transport hard case, LCT 40 SHx shock mount, LCT 40 Wx Windshield, LCT 50 PSx pop protection and DTP 40 Lb pouch

• LD WIN42 AD

  LD Systems LD WIN42 AD, Active Antenna Splitter, For up to 4 wireless systems, BNC antenna connections, Frequency band: 500 - 900 MHz, Signal gain: 3 dB, Input / Output impedance: 50 Ohm, Format: 19" / 1 RU, Case depth: 160 mm, Weight: 4.8 kg, Includes 10x BNC cable, 2x BNC adapter, 2 antennas, power supply (12 V DC - 18 V DC (100 mA), 4x 12V DC power cable and plastic case

• LD303 Layer Delayer

  Ibanez LD303 Layer Delayer, Effect Pedal for Electric Guitar, Delay, Independent variable volume control for 16th note and triplet delay notes, Stereo input and output, FX loop in the delay signal path, MIDI input and through, Simulated digital delay/analogue delay/tape echo sounds that gradually merge into one another, Simulated low-pass ladder filter, Variable tail delay, 8 auto panning modes, Tap tempo footswitch, 20 factory presets in 50 presets, Dimensions: 175 x 125 x 62 mm, Weight: 640 g, Current consumption: 300 mA at 9V, Power supply: only via external 9 V DC power supply, centre negative (not included)

• LDP Deluxe

  Rodenberg LDP Deluxe OD/CB, Effects Pedal for Electric Bass, 3 Completely independent pedals in one housing, Signal flow: Bass-> Low Gain Overdrive-> High Gain Overdrive-> Boost-> Amplifier, Overdrive Low Gain control (Bass Boost switch): Level, Tone, Drive, Overdrive High Gain control (switch for Bass Boost): Level, Tone, Drive, Control Clean Boost (switch for Bass Boost and + 20dB Level Boost): Level, Tone, Push buttons: 3x True Bypass, Switch: Locked for overdrives, LED: Effect on, Footswitch: Effect bypass, Input: 6.3 mm jack, Output: 6.3 mm jack, Power supply connection: coaxial connector 5.5 x 2.1 mm, negative polarity inside, Current consumption: 50-100 mA, Power supply via 9 V DC power pack (not included, suitable power pack: Art.#409939#), True bypass, Dimensions (W x D x H): 145 x 120 x 378 mm, Weight: 600 g, Handmade in Germany@+*Note:* Battery operation is not supported.

• LDP Deluxe Victor Wooten

  Rodenberg LDP Deluxe Victor Wooten, Effect Pedal for Electric Bass, Overdrive / Boost, Developed in collaboration with Victor Wooten, Delivers its unmistakable sound: Dynamic, warm and powerful, Three completely independent pedals in one housing: Low gain overdrive, high gain overdrive and clean boost, Sound design by Marcus Miller and Uli Rodenberg, True bypass, Controls: Low Gain OD - Drive, Tone, Level / High Gain OD - Drive, Tone, Level / Boost - Tone, Level, Switches: Low Gain OD - Deep, Gain / High Gain OD - Deep, Push / Boost - Deep, Pre/Post, +20 dB, Locked for Low & High Gain OD, Footswitch: Boost, Distortion, Overdrive Bypass, LED: Boost, Distortion, Overdrive On, Input and output: 6.3 mm jack, Power consumption: 100 mA, Power supply via 9 - 18 V DC mains adapter (2.1 x 5.5 mm barrel connector, centre negative) - suitable power supply: Art. #409939# (not included), Dimensions (W x D x H): 145 x 120 x 38 mm, Weight: 600 g, Handmade in Germany@+*Note:* Battery operation is not supported.

• LDP OD/CB

  Rodenberg LDP OD/CB, Effect pedal for electric bass, Overdrive / Boost, Successor model of the GAS-728B, 2 Completely separate pedals in one housing, Separate Deep Boost for Overdrive and Clean Boost, Optimized Overdrive and Clean Boost circuitry, New Vintage plexi design, True bypass, Controls: 2x Tone, Drive, Tone, 2x Level, Clean Boost, Overdrive, Push-buttons: 2, Switches: On (+20dB), 2x Deep, Gain, LED: Effect On, Foot-switch: Bypass effect, Input: 6.3 mm Jack, Output: 6.3 mm Jack, Mains adapter connection (hollow plug socket 5.5 x 2.1 mm, minus pole inside), Current consumption: 50 mA, Power supply via 9-18 V DC power supply unit (not included in delivery - suitable power supply unit: Article Nr. #409939#), Dimensions (W x D x H): 95 x 120 x 33 mm, Weight: 500 g@+*Note:* Battery operation is not supported.

• LDWS1000MW

  LD Systems LDWS1000MW, Clip Microphone, For wind instruments, wind / percussion clip microphone, Polar Pattern: Kidney, Frequency response: 50 Hz - 18 kHz, SPL: 133 dB, Sensitivity: -45 dB +/- 3 dB, Impedance: 250 Ohm +/- 30% 1 kHz, Connector: Mini XLR - 3-pin, Gooseneck: 70 mm, Cable length: 1.5 m, Colour: Black matte, Weight: 56 g

• LDWS100MH1

  LD Systems LDWS100MH1, Aerobic Headset for WS100 Wireless Systems, Polar pattern: Cardioid, Frequency range: 20 Hz - 20,000 Hz, Colour: Black, Connector: 3-pin TQG plug, Compatible with t.bone Free Solo, Suitable phantom adapter: Item no. #270719# (not included)

• LDWS100MH3

  LD Systems LDWS100MH3, Aerobic Headset, For WS 100 radio system, Polar pattern: Cardioid, Frequency response: 70 - 16,000 Hz, Impedance: 1.4 kOhm, Sensitivity: -67 dB, 3-Pin TQG plug, Colour: Beige

• Le Streghe Stradivari Soloist

  Gewa Le Streghe Stradivari Soloist, Soloist Violin 4/4, With certificate of authenticity and brand stamp, Hand-selected, beautifully flamed maple back, Fine grained spruce top with calibrated sound, Spirit hand varnish, Ebony fingerboard, Pegs, tailpiece, endpin and chinrest made of boxwood, Inlaid purfling, Larsen Il Canone strings, Made in Germany

• Lead A1

  Clavia Nord Lead A1, 49 Key Synthesizer with Analogue Modelling Sound Generator, Velocity-sensitive keys with octave shift +/- 2 octaves, Synth engine with 96 kHz and 32 bit floating point processing, 24-Voice polyphony, 4-Part multi-tembral, Keyboard Split with 2 slots for the upper and lower section, Modulation wheel, Pitch Stick with programmable range of +/- 4 octaves, Oscillators: Pitch, detune, shape, sync, on, noise, sub mix, fm, traditional analogue and digital waveforms, Unison, Modulation: LFO with 5 waveforms mod envelope, LFO as an additional Mod Envelope, Filter: 12 x 24 dB low-pass filter, high-pass and band-pass filter, Transistor and diode "ladder" filter simulation, Effects: Ensemble, Chorus, Phaser, Flanger, ring modulator and Drive, Performance: Master Clock Sync the arpeggiator, LFO and Delay, Velocity and Modulation Morph, USB MIDI, Extra Features: Mutator, Like button, "Extra fat" unison mode, 1 Pedal input for sustain, 1 Pedal input for expression, 4 x 6.3 mm Jack outputs, 1 x 6.3 mm Jack headphone output, MIDI input and output, USB port, Dimensions (W x H x D): 802 x 92 x 260 mm, Weight: 4.85 kg

• Leaf CG KK CW Slim 14

  Carvalho Leaf CG KK CW Slim 14, Classical Guitar with Pickup, Body style: Slim body with cutaway, Body: Laminated Acacia, Neck: Sycamore, Fingerboard and bridge: Acacia, Scale length: 650 mm, Frets: 21, Nut width: 48 mm, Pickups: APC with 4-band EQ and built-in tuner, Nut and saddle: ABS, Gold-coloured machine heads with mother of pearl buttons, Colour: Natural open-pore, Made in Portugal

• Leap Polyphonic Octave

  Klowra Leap Polyphonic Octave, Effect Pedal for Electric Guitar, Bass and Keyboards, Digital polyphonic octave and freeze pedal, Freeze function, Three detune modes: Clean, Shallow and Deep, Three filter modes: Low Pass, Tilt EQ and High Pass, Analogue dry-through in buffered bypass mode, USB-C port for firmware updates, Controls: +Oct, -Oct, Dry, Tone, Button: Detune, Switch: LP, Tilt, HP, LED: Effect status, detune mode, Footswitch: Effect On/Off, Freeze (press and hold), Input: 6.3 mm jack, Output: 6.3 mm jack, CTRL: 3.5 mm mono jack, USB-C, Power supply connection: Barrel connector 5.5 x 2.1 mm, centre negative, Current consumption: 150 mA, Power supply via 9 V DC power supply (not included, suitable power supply: Art. #409939#), Switchable true/buffered bypass, Dimensions: (W x D x H): 38 x 92 x 51 mm, Weight: 234 g@+*Note:* Battery operation not supported.

• Ledges Glaciers Reverberation

  EarthQuaker Devices Ledges Glaciers Reverberation is a guitar or bass effect.

• Ledges Reverberation Machine

  EarthQuaker Devices Ledges Reverberation Machine, Effect Pedal for Electric Guitar, Reverb, From classic standard reverberations to undiscovered sonic possibilities, Reverb with three modes and the ability to store and recall six presets, plus assignable expression control, Two global operating modes (Live Mode/Preset Mode) indicated by the colour of the Save/Recall switch, Silent relay-based switching with Flexi-Switch technology, Mode R: The shortest Room setting creates a small, chamber-like room sound that gradually gets bigger as it is turned it up, Mode H: The Hall setting creates a really big, boomy, and echo-rich reverb with distinct reflections, Mode P: The Plate setting creates bouncing reflections that recur and reverberate, Buffered bypass with tails, Controls for length, damping, mix and preset, Mode switch, Save/Recall switch, Bypass footswitch, Status LED, Metal housing, Input and output: 6.3 mm mono jack, Input for external control: 6.3 mm stereo jack, Power supply via optional 9 V DC power supply unit: 2.1 mm x 5.5 mm barrel connector, centre negative (not included), Current consumption: 75 mA, Dimensions (L x W x H): 127 x 67 x 54 mm, Weight: 279 g, Handmade in USA@+*Note:* Battery operation not supported

• Legacy 810e Special Edition HB

  Taylor Legacy 810e Special Edition HB, Steel-String Guitar with Pickup, Style: Dreadnought, Top: Solid sitka spruce, Back and sides: Solid rosewood, Neck: Mahogany, Fingerboard: Ebony, Cindy fingerboard inlays made of mother-of-pearl and green abalone, Cream binding, Scale: 632 mm (24.9"), Nut width: 44.5 mm (1.75"), Nut: TUSQ, 20 frets, Pickups: LR Baggs Element VTC, Tortoise pickguard, Ebony bridge with micarta saddle, Taylor nickel machine heads, Strings: D'Addario XS Coated Phosphor Bronze Medium, Colour: Heritage Burst, Includes case, Made in USA

• Legacy 914ce

  Taylor Legacy 914ce, Acoustic Guitar with Pickup, 900 Series, Style: Grand Auditorium Dreadnought, Back and sides: Solid Indian rosewood, Legacy X-Class bracing, Top: Solid Engelmann spruce, Neck: Mahogany, Fingerboard: West African ebony, "Cindy" fingerboard inlays, Scale: 648 mm, Nut width: 44.50 mm, Frets: 20, Pickup: L.R. Baggs Element VTC, Taylor nickel machine heads, Original strings: D'Addario XS Coated Phosphor Bronze Light, Colour: Natural Gloss, Includes case, Made in USA@+*Note:* Register your Taylor guitar to extend your warranty to 12 years.

• Legacy Edition 514ce

  Taylor Legacy Edition 514ce, Steel-String Guitar with Pickup, Type: Grand Auditorium with cutaway, X-Bracing, Top: Solid cedar, Back and sides: Solid mahogany, Neck: Mahogany, Fingerboard: Ebony, Binding: Ivory, Scale: 648 mm (25.5"), Nut width: 44.5 mm (1.75"), Pickup: L.R.Baggs Element VTC, Strings: Daddario XS Coated Phosphor Bronze Medium (Art.#516198#), Includes case

• Legacy Edition 810e

  Taylor Legacy Edition 810e, Acoustic Guitar with Pickup, Style: Dreadnought, Top: solid sitka spruce, X-Bracing, Back and sides: solid rosewood, Neck: Mahogany, Fingerboard: Ebony, Scale: 648 mm (25.5"), Nut width: 44.5 mm (1.75"), Pickup: L.R. Baggs Element VTC, Strings: D’Addario XS Coated Phosphor Bronze Medium (Art. #516198#), Includes case

• Legacy Edition 815e

  Taylor Legacy Edition 815e, Steel-String Guitar with Pickguard, Type: Jumbo, Top: Solid Sitka spruce, X-Bracing, Back and sides: Solid rosewood, Neck: Mahogany, Fingerboard: Ebony, Scale: 648 mm (25.5"), Nut width: 44.5 mm (1.75"), Pickup: L.R.Baggs Element VTC, Strings: D’Addario XS Coated Phosphor Bronze Medium (Art. #516198#), Includes case

• Legacy Edition 855e

  Taylor Legacy Edition 855e, 12-String Steel-String Guitar with Pickup, Type: Jumbo, Top: Solid Sitka spruce, X-Bracing, Back and sides: Solid rosewood, Neck: Mahogany, Fingerboard: Ebony, Scale: 648 mm (25.5"), Nut width: 48 mm (1.75"), Pickup: L.R.Baggs Element VTC, Strings: Daddario XS Coated Phosphor Bronze Medium (Art.#516200#), Includes case