Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.
Pace iLok 3, Portable USB Smart Key, For software authorisations that are protected by iLOK License Management, Allows the software to be used at different workstations, Up to 1500 licenses can be stored (license-dependent), Compact design, Solid outer cover, ILOK account and Internet access required for registration, Connection type: USB-A@+*Note:* Only iLOK protected software can be used - please observe the specifications of the respective software manufacturer!
Pace iLok 3 USB-C, USB Copy Protection Key, For software licences protected by iLok licence management, Enables serial use of the stored licences at different workstations, Depending on the size of the licences used, up to 1500 licences can be stored, Compact design and solid metal housing, Can only be used for iLOK protected software - please note the specifications of the respective software manufacturer, Connection type: USB-C@+*Note:* iLok account and internet access required for registration processes
IK Multimedia iLoud Micro Mon.White Edition, Active Two-Way Monitors, Limited special series in white, Active two-way monitors with 3/4" tweeter and 3" woofers/midrange speakers with powerful bass reflex system, Frequency range: (55 - 20,000 Hz) +/-3 dB, Separate Class D amplifier for tweeter and woofer, A total of four power amplifiers with 7/18 W RMS, Filter settings High Shelf (0, +2 dB @ 4 kHz), Low Shelf (0, -3 dB @ 300 Hz), Desktop (-8 dB @ 300 Hz), Completely DSP controlled, Bluetooth compatible via A2DP protocol, Dimensions: 180 x 135 x 90 mm, Weight: 1.72 kg, Includes: A pair of iLoud Micro monitors, power supply, power cable, four-pin speaker connection cable mini-jack to 2 x Cinch connection cable 1.5 m
IK Multimedia iLoud Micro Monitor, Active Two-Way Monitors, With 3/4" tweeter and 3" woofer / midrange with a powerful bass reflex system, Frequency response: 55 - 20,000 Hz (-3 dB), Separate class D amplifiers for tweeters and woofers, Total of four power amplifiers with 7/18 W RMS, Filter settings High Shelf (0, + 2 dB @ 4 kHz), Low Shelf (0, -3 dB @ 300 Hz), Desktop (-8 dB @ 300 Hz), Completely DSP controlled, Bluetooth compatible via A2DP protocol, Dimensions: 180 x 135 x 90 mm, Weight: 1.72 kg, Includes power supply unit, power cord, four-pin speaker connection cable (2 m) and mini jack to 2x RCA connection cable (1.5 m)
IK Multimedia iLoud Micro Monitor Pro, Active 2-Way Monitor, Equipped with: 3" woofer/midrange driver with bass reflex system and 1" tweeter, Class D amplifier, LF amplifier power: 30 W RMS, HF amplifier power: 20 W RMS, Linear-phase crossover at 2,500 Hz, Frequency range: 50 - 20,000 Hz (± 2 dB), Filter settings: High Shelf (+2/-3 dB @8 kHz), Low Shelf (+2/-3 dB @100 Hz), Desktop (-3 dB @250 Hz and +4 dB @ 1.2 kHz) and LF Extension (-3 dB at 50 or 80 Hz), Fully automatic integrated digital calibration via supplied measurement microphone, Completely DSP-controlled, Compatible with X-Monitor software, Inputs: 1x XLR, 1x RCA, USB Type-C, ARC X Immersive can be enabled on registered, eligible multi-channel systems with four or more iLoud speakers (Micro Monitor Pro, MTM MKII, Precision, and Sub) or two or more ARC Studio units, Dimensions: 208 x 153 x 105 mm, Weight per monitor: 1.37 kg, Includes power cable, USB cable and ARC measuring microphone@+*Note:* To calibrate the speakers, a standard XLR cable is required to connect the ARC measurement microphone to the speaker - e.g. Art.#128512# (not included)
IK Multimedia iLoud Micro Monitor Pro White, Active Two-Way Monitor, Equipped with: 1" tweeter and 3" bass/midrange driver with bass reflex system, Class-D amplifier, LF amplifier power: 30 W RMS, HF amplifier power: 20 W RMS, Linear-phase crossover at 2.5 kHz, Frequency range: 50Hz - 20 kHz (+/-2 dB), Filter settings: High shelf (+2/-3 dB @8 kHz), Low Shelf (+2/-3 dB @100 Hz), Desktop (-3 dB @250 Hz and +4 dB @ 1.2 kHz) and LF Extension (-3 dB at 50 or 80 Hz), Fully automatic integrated digital calibration via supplied measurement microphone, Completely DSP-controlled, Compatible with X-Monitor software, 1x XLR input, 1x RCA input, 1 x USB type-C, Includes power supply cable, USB cable, ARC measurement microphone, Dimensions: 208 x 153 x 105 mm, Weight: 1.37 kg (per monitor)@+*Note:* A standard XLR cable is required to connect the ARC measurement microphone to the speaker for calibrating the speakers - e.g. Art.#128512# (not included in the scope of delivery).
IK Multimedia iLoud MTM MKII, Active Two-Way Monitor, Class-D amplifier, Equipped with: 1" tweeter and 2x 3.5" bass/midrange drivers with bass reflex system, LF amplifier power: 70 W RMS, HF amplifier power: 30 W RMS, Linear-phase crossover at 2.8 kHz, Frequency range: 48 Hz - 28.000 Hz (± 2 dB), Vertical or horizontal positioning, Incldued table stand tiltable from 0° to 20°, Filter settings: high shelf (+2/-3 dB @8 kHz), low shelf (+2/-3 dB @100 Hz), desktop (-4 dB @160 Hz, +1 @ 1.8 kHz) and LF extension (-3 dB at 40, 50, 60 or 80 Hz), Fully automatic integrated digital calibration via supplied measurement microphone, Completely DSP-controlled, Compatible with X-Monitor software, Combo socket input: 1x XLR/TRS, Microphone input: 1/8’ TS ARC, 1 USB type B, ARC X Immersive can be enabled on registered, compatible multi-channel systems with four or more iLoud speakers (Micro Monitor Pro, MTM MKII, Precision or Sub) or two or more ARC Studio units, Includes power supply cable, ARC measuring microphone with connection cable and microphone clamp, feet for horizontal installation, locking key, Dimensions: 264 x 160 x 130 mm, Weight: 2.5 kg (per monitor)
IK Multimedia iLoud MTM MKII Immersive BDL, Multi-Channel Speaker System, Immersive audio bundle for various multi-channel solutions with 11x iLoud MTM MKII speakers, Active two-way monitor with 1" tweeter and 2x 3.5" bass/midrange drivers with bass reflex system, Class D amplifier, LF amplifier power: 70 W RMS, HF amplifier power: 30 W RMS, Linear-phase crossover at 2.8 kHz, Frequency range: 48 Hz - 28 kHz (+/-2 dB), Vertical or horizontal positioning, Table stand tiltable from 0° to 20° included, Filter settings: high shelf (+2/-3 dB @8 kHz), low shelf (+2/-3 dB @100 Hz), desktop (-4 dB @160 Hz, +1 @ 1.8 kHz) and LF extension (-3 dB at 40, 50, 60 or 80 Hz), Fully automatic integrated digital calibration via supplied measurement microphone, Completely DSP-controlled, Compatible with X-Monitor software, One input combination socket : XLR/TRS, 1/8" TS ARC microphone input, 1 USB type B, ARC X Immersive can be enabled on registered, eligible multi-channel systems with four or more iLoud speakers (Micro Monitor Pro, MTM MKII, Precision, and Sub) or two or more ARC Studio units, Includes 11x iLoud MTM MKII monitor, mains cable, 1x ARC measurement microphone with connection cable and microphone clamp, feet for horizontal positioning, locking key, Dimensions: 264 x 160 x 130 mm, Weight per monitor: 2.5 kg
IK Multimedia iLoud MTM MKII White, Active Two-Way Monitors, Equipped with: 1" tweeter and 2x 3.5" bass/midrange drivers with bass reflex system, Class-D amplifier, LF amplifier power: 70 W RMS, HF amplifier power: 30 W RMS, Linear-phase crossover at 2800 Hz, Frequency range: 48 Hz - 28,000 Hz (± 2 dB), Vertical or horizontal positioning, Table stand inclinable from 0° to 20° included, Filter settings: High Shelf (+2/-3 dB @ 8000 Hz), Low Shelf (+2/-3 dB @100 Hz), Desktop (-4 dB @160 Hz, +1 @ 1800 Hz) and LF Extension (-3 dB at 40, 50, 60 or 80 Hz), Fully automatic integrated digital calibration via supplied measurement microphone, Completely DSP-controlled, Compatible with X-Monitor software, Input: XLR/TRS combo jack, Microphone input: 1/8 Inch TS ARC, USB type B, ARC X Immersive can be enabled on registered, eligible multi-channel systems with four or more iLoud speakers (Micro Monitor Pro, MTM MKII, Precision, and Sub) or two or more ARC Studio units, Dimensions: 264 x 160 x 130 mm, Weight: 2.5 kg (per monitor), Including ARC measurement microphone with connection cable and microphone clamp, feet for horizontal installation, power cable and locking key
IK Multimedia iLoud Precision 5 MKII, Active Studio Monitor, Integrated DSP and ARC room correction, Speaker configuration: 5" mid-bass woofer and 1.5" tweeter, Total power output: 135 W RMS, Frequency range: 46 Hz - 30,000 Hz +/- 1 dB (sub-bass extension to 39 Hz with -4 dB), Max. sound pressure level: 101.6 dB (continuous), 113.3 dB (peak), Coherent phase response +/-20° from 150 Hz upwards, Time coherent across the audio spectrum, Fully automatic integrated digital calibration via included measurement microphone, Compatible with ARC X, Fully DSP-controlled with 96 kHz internal processing, Auto standby function, ARC X Immersive can be enabled on registered, eligible multi-channel systems with four or more iLoud speakers (Micro Monitor Pro, MTM MKII, Precision, and Sub) or two or more ARC Studio units, Dimensions (H x W x D): 305 x 177 x 248 mm, Weight: 7 kg, Includes MEMS measurement microphone and iLoud Isolation Pods
IK Multimedia iLoud Precision 6 MKII, Active Studio Monitor, Integrated DSP and ARC room correction, Speaker configuration: 6.5" mid-bass woofer and 1.5" tweeter, Total power output: 150 W RMS, Frequency range: 45 - 30,000 Hz +/- 1 dB (sub-bass extension to 37 Hz with -4 dB), Max. sound pressure level: 103 dB (continuous), 115.2 dB (peak), Coherent phase response +/-20° from 150 Hz upwards, Time coherent across the audio spectrum, Fully automatic integrated digital calibration via included measurement microphone, Compatible with ARC X, Fully DSP-controlled with 96 kHz internal processing, Auto standby function, ARC X Immersive can be enabled on registered, eligible multi-channel systems with four or more iLoud speakers (Micro Monitor Pro, MTM MKII, Precision, and Sub) or two or more ARC Studio units, Dimensions (H x W x D): 353 x 201 x 282 mm, Weight: 8.5 kg, Includes MEMS measurement microphone and iLoud Isolation Pods
IK Multimedia iLoud Precision MTM MKII, Active Studio Monitor, Integrated DSP and ARC room correction, Speaker configuration: Two 5" mid-bass drivers and one 1.5" tweeter, Total power output: 175 W RMS, Frequency range: 45 - 30,000 Hz +/- 1 dB (sub-bass extension to 37 Hz with -4 dB), Max. sound pressure level: 105.5 dB (continuous), 117.0 dB (peak), Linear phase response from 150 Hz up and minimal phase rotation below 150 Hz, Time coherent across the audio spectrum, Fully automatic integrated digital calibration via included measurement microphone, Compatible with ARC X, Fully DSP-controlled with 96 kHz internal processing, ARC X Immersive can be enabled on registered, eligible multi-channel systems with four or more iLoud speakers (Micro Monitor Pro, MTM MKII, Precision, and Sub) or two or more ARC Studio units, Auto standby function, Dimensions (H x W x D): 459 x 185 x 282 mm, Weight: 10.5 kg, Includes MEMS measurement microphone and iLoud Isolation Pods
IK Multimedia iLoud Sub, Active Subwoofer, Ultra-compact active studio subwoofer with built-in speaker calibration, Equipped with: 6.5" woofer and 2 x 6.5" passive radiators, Power: 160 W RMS, 200 W peak, Frequency response: 25 – 150 Hz @ -6 dB, Max. sound pressure level at 40 Hz: 106 dB peak, Integrated ARC room correction for subwoofers and connected monitors, Automatic phase adjustment, Volume and EQ optimisation, ARC X Immersive can be enabled on registered, eligible multi-channel systems with four or more iLoud speakers (Micro Monitor Pro, MTM MKII, Precision or Sub) or two or more ARC Studio units, Bluetooth, Auto standby, Inputs: 2 x XLR/6.3 mm TRS jack combo, Outputs: 2 x XLR, RCA input and output, USB connection for data and audio, Dimensions (H x W x D): 244 x 250 x 283 mm, Weight: 7.1 kg, Includes measurement microphone and ARC X software
IM Mutes IM Flip Wireless Page Turner, Smart Tablet Page Turner, For brass instruments, Wireless, With instrument holder, Attaches easily to the instrument and allows for uninterrupted playing and scrolling on a tablet without being affected by the instrument’s vibrations, Designed for quick and easy installation, Does not damage the finish and remains inconspicuous on stage, The button features three options: Single Click, Double Click and Long Press, Options for use: Start the metronome, activate an effect or turn the page, Flic Bluetooth button technology
Fluid Audio Image 1, Active 3-Way Monitor, Equipped with: 2x 6.5" bass, 1x 4" midrange and 1.1" x 1.7" AMT tweeter, Integrated support for Sonarworks SoundID Reference profiles with up to four loadable presets, DCT software for CubeMix mode, Maximum level: 108 dB, Frequency response: +/-4.6 dB 40 – 20,000 Hz, +/-2.0 dB 80 – 20,000 Hz, Bass response: -3 dB at 45 Hz, Crossover: Bass/midrange: 190 Hz, midrange/treble: 3000 Hz, Amplifier power Class D: 2x 150 W bass, 100 W midrange, 75 W tweeter, Integrated AD converter with 24-bit/192kHz, Adjustable sound tuning: high frequencies: (-1, 0, +1), mid frequencies (-1, 0, +1), bass (-2, -1, 0, +1, +2), Input (analouge): XLR, Input (digital): XLR digital AES/EBU, Thru input (digital): XLR digital AES/EBU, Dimensions: 206 x 308 x 308 mm, Weight: 9.9 kg
Fluid Audio Image 2 White, Active 3-Way Monitor, Closed housing, Equipped with: 2x 8" woofer, 1x 5" midrange driver and 1x AMT tweeter (1.1" x 1.7"), Amplifier power RMS: 2x 225 W (woofer - Class D) + 150 W (midrange - Class D) + 75 W (tweeter - Class D), Frequency range: 28 - 20,000 Hz (+/-4.6 dB), 80-20,000 Hz (+/-2.0 dB), Integrated AD converter with 24 bit / 192 kHz, Crossover frequency at 115 Hz and 2800 Hz, Cubemix mode can be activated via the supplied footswitch, Rotatable baffle for midrange and tweeter (tweeter optionally at the top or bottom), Sonarworks integration - SoundID reference profiles can be saved and loaded directly onto the speaker's DSP, DCT (DSP Configuration Tool) software for managing room correction profiles, Dimensions (D x W x H): 351 x 241 x 363 mm, Weight: 12.6 kg@+*Connections:*, 1 x XLR audio input, 1 x TRS jack input, 1 x XLR AES/EBU input, SPDIF input/output, USB 2.0 type B (DSP settings)
Fluid Audio Image 212S, Active Subwoofer, Closed construction, Two opposing 12" drivers, Dual-opposed design to minimise housing vibrations, Frequency range: 29–110 Hz (-3 dB), Bass response: -10 dB at 26 Hz, Max. SPL: 120 dB @1 m, Amplifier power: 2 x 500 W RMS, 2 x 1000 W peak, Variable settings for gain, phase and crossover, Analogue XLR input and output, Digital AES input and output, Additional LFE channel, Automatic standby function, Dimensions (L x W x H): 350 x 540 x 485 mm, Weight: 27.9 kg
DOCtron IMC MK2, Instant Mastering Chain, Compact analogue stereo processor for processing sum signals in live and studio applications, Adjustable input level (0 dB to -10 dB), 2-band shelving equaliser (60 Hz and 12 kHz) with +/-14 dB control range and bypass switch, VCA compressor (THAT) with controls for threshold, ratio (1:1.5 to 1:10), attack and release (with selectable auto mode), Compressor sidechain switchable between feed forward (FF) and feed backward (FB), Saturation stage with Lundahl transformer and adjustable drive and output level, Switchable true bypass, Stereo headphone output with level control: 3.5 mm jack, Stereo input/output: 6.3 mm jack, balanced, Sidechain send/return: 6.3 mm jack, Dynamic range: 108 dB A, Signal-to-noise ratio: -108 dB A, Total harmonic distortion (THD): 0.0099%, Max. output level: +24 dBu, Solid but lightweight carbon housing, Dimensions (W x D x H): 146 x 143 x 56 mm, Weight: 990 g, Includes external power supply (24 V DC, 1.0 A)
DOCtron IMC-500, Instant Mastering Chain, In 500 module format, Compact analogue stereo processor for processing sum signals in live and studio applications, Adjustable input level (0dB to -10dB), 2-Band shelving equaliser (60Hz and 12kHz) with +/-14dB control range and bypass switch, VCA compressor (THAT) with controls for threshold, ratio (1:1.5 to 1:10), attack and release (with selectable auto mode), Compressor sidechain switchable between feed forward (FF) and feed backward (FB), Saturation stage with Lundahl transformer and adjustable drive and output level, Switchable true bypass, Dynamic range: 108 dB A, Signal-to-noise ratio: -104 dB A, Total harmonic distortion (THD): 0.0099%., Max. output level: +24 dBu, API Series 500 format (occupies two slots)
DAP-Audio IMIX-5.3, 5 Channel Installation Mixer, 3 Zones, Input channels: 1x microphone (XLR / jack combined), 7x Line (RCA), 2x Phono (RCA), 1x Phone (3.5 mm jack), Output channels: 3x master balanced (XLR), 1x headphones (6.3 mm jack), Master EQ, Format: 19"/ 4U, Dimensions: 481 x 89 x 176 mm, Weight: 3.4 kg
DAP-Audio IMIX-6.2, 7-Channel Fixed Installation Mixer, Built-in 5.0 Bluetooth receiver, 2 zones, Installation format: 2 U, 19", Reverb effect for microphone channels, Dimensions (W x D x H): 482 x 129 x 89 mm, Weight: 2.6 kg@+*Input channels:*, 2x Microphons with EQ control and 48 V phantom power (connections on the front and rear): XLR / 6.3 mm jack combined, 3x line with gain control: Cinch, 1x Phono/line with gain control: RCA, 1x AUX Phone/Line on the front: RCA / 3.5 mm jack@+*Output channels:*, 2x Master: balanced XLR / RCA, 1x Rec Out: RCA, 1x Headphones: 6.3 mm jack
DAP-Audio IMIX-7. 1, Installation Mixer, 7 Channel 2U installation mixer, 3 Master outputs, Master EQ, Dimensions (W x H x D): 481 x 95 x 88 mm, Weight: 2.8 kg@+@+*Input channels:*@+@+, 2 x Microphone (XLR/jack combined), 11 x Line (RCA), 2 x Phono (RCA), 1 x Phono (3.5 mm jack)@+@+*Outputs:*@+@+, 3 x Master channels: 2 x via XLR and RCA, 1 x via RCA, 1 x REC (RCA), 1 x Headphones (6.3 mm jack)
DAP-Audio IMIX-7.3, 7-Channel Installation Mixer, 3 Zones, Input channels: 2x microphone (XLR / jack combined), 11x Line (RCA), 2x Phono (RCA), 1x Phone (3.5mm jack), Outputs: 3x master balanced (XLR), 1x REC (RCA), 1x headphone (6.3 mm jack), Master EQ, Format: 19"/ 2U, Dimensions: 481 x 95 x 88 mm, Weight: 2.8 kg
Neunaber Immerse Reverberator Mk II, Effect Pedal for Electric Guitar, Digital reverb, Updated model of the "Immerse Reverberator", Eight reverb modes: W3T (Wet version 3) / Plate / Hall / Spring / Sustain / Echo / Detune / Shim, Various routing options, Selectable bypass: True / Buffered, Analogue dry signal path for low noise and no latency, Controls for Mix, Time/Tone, Depth, and Pre-Dly/Mod/Blend, 8-way rotary switch for selecting between reverb modes, Trails switch on the back, Kill Dry switch on the rear panel, Bypass footswitch, Status LED: Effect On, Metal housing, Input 1: 6.3 mm jack, Input 2: 6.3 mm stereo jack, Output 1: 6.3 mm jack, Output 2: 6.3 mm stereo jack, Power supply via 9 – 12 V DC power supply, 2.1 mm x 5.5 mm barrel connector, centre negative (not included – suitable power supply: Art. #409939#), Power consumption: 80 mA, Dimensions (W x D x H): 117 x 73 x 51 mm, Weight: 250 g, Made in USA@+*Note:* Battery operation is not supported.