Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.
Radial Engineering HotShot ABI, ABY Switch, Balanced ABY foot signal switch, 2 XLR Inputs, 1 XLR Output, Large foot switch for switching, 15 dB pad per channel switchable, -3 dB Trim and Gnd / Lift to Input B, Robust metal casing, Colour: Black
Radial Engineering HotShot ABO, Balanced Line Output Selector, 1 x XLR input, 2 x XLR output, Large foot switch for switching, 15 dB pad can switch between channels, -3 dB Trim and Gnd / Lift to Input B, Robust metal housing, Colour: Black
Fender HotShot Tele Relic AGS LTD, Electric Guitar, Two-piece body: selected alder, Neck: 3A flamed maple, Fingerboard: Maple, Fretboard radius: 7.25" to 9.5" Vintage Compound, Neck profile: 57 Style Soft V, 21 Narrow tall frets, Pickups: 1 Custom Shop hand-wound Loaded '51 Nocaster (bridge) and 2 Texas Special Strat (neck/RWRP middle) single coils, Pickguard: 3-Ply parchment, Hotshot Tele circuit, '58-'63 Tele bridge with compensated RSD brass saddles, Vintage-style machine heads, Colour: Aged Gold Sparkle, Incl. Deluxe hardshell case and certificate of authenticity, Made in USA
Kali Audio HP-1, Bluetooth Headphones with Noise Cancellation, Closed-back studio headphones with Bluetooth and active noise cancellation, 3 switchable presets: Studio, Consumer und Bass-Heavy, Built-in microphone, Rechargeable Li-Ion battery, Operating time: 40 hours, Wired passive mode for studio use, Driver diameter: 40 mm, Frequency range: 18–22,000 Hz, Controls: Button control (play/pause/next/previous), DSP latency: 17 ms, DSP cannot be bypassed, Closed-back design, Foldable design, Connections: Bluetooth (AAC, SBC), 3.5 mm stereo jack and USB-C for charging, Weight: 0.15 kg, Colour: Black, Includes USB-C charging cable, 3.5 mm cable and 6.3 mm adapter
Fostex HP-A3mk2, Headphone Amplifier and D/A Converter, With USB interface, Conversion 24 bit / 192 kHz, Power supply via USB bus power, Internal PLL power supply unit for stable power supply, ESS Technology ES9016K2M D/A-Chip, Input selection: USB or Digital (Optical TOS-Link), Output selection: 6.3 mm jack headphones or 2 x analogue RCA, System requirements: Windows 10, Mac OS 10.15 or newer, Dimensions (W x D x H): 113 x 155 x 34 mm, Weight: 500 g
Presonus HP2, Mobile stereo headphone amplifier, Ideal for wired in-ear monitoring, Also suitable for mobile recording, 2 Mounting options: Belt clip or 5/8" thread for tripod mounting, Input: 2 x XLR female (Line L/R) via enclosed breakout cable, Large volume control, Large panorama control, Panpot also serves as balance control between input 1 and 2 in mono mode, Output: TRS stereo jack (3.5 mm), Frequency range: 30 Hz - 20 kHz (±2 dB), Maximum input level: +4 dBV, Output power: 50 mW/channel (<0.01% THD+N @ 20 Ohm), Minimum impedance of headphones used: 12 Ohm, Power supply: 9 V block battery (not included) or mains adapter, On/off switch on the back, Power LED, Battery control LED, Dimensions: 134 x 73 x 32 mm, Weight: 450 g (without battery), Incl. 2 m breakout cable (mini 5-pin XLR to 2 x XLR female) and power supply unit (9 V/40 mA)
Presonus HP4, 4-Channel Headphone Amplifier, With monitor control, 4 Separately adjustable stereo headphone outputs: 6.3 mm Stereo headphone, Maximum output power: 130 mW per channel, Distortion factor <0.5% THD + N to 60 ohm load, Frequency range: 20 - 20,000 Hz, THD / N: <0.0025% (input and output), Recommended earphone impedance: 32 - 600 ohms, Balanced line input: 6.3 mm jack, L/R, Balanced monitor output for connecting the studio monitor or for looping to additional headphones: 6.3 mm jack, L/R, Monitor level as the main volume controller of the studio monitor, Mute switch for monitor output, Mono switch for headphone outputs, Dimensions: 140 x 140 x 45 mm, Weight: 2.27 kg
Presonus HP60, 6-Channel headphone amplifier, 6x Independent ultra low-noise headphone amplifier, 150 mW per channel, With output control, 2x Stereo input (A and B) with symm. 6.3 mm jack connectors, Additional stereo input for every channel with level control, Mix control between input A and B, Talkback for separate microphones with XLR connector, Direct stereo line output on every channel (1/4" jack), Size: 19"/1 U, Incl. Power supply
LD Systems HPA 1, In Ear Headphones Amplifier, 2 XLR Inputs, Stereo/ mono/ mixed mode, Frequency range: 20 - 40,000 Hz, Impedance: 16 Ohm, Volume knob, Balance/ mix knob, Stereo - mono/ focus switch, 3.5 mm Stereo jack output, 3.5 mm jack aux input, Integrated limiter, Operated with 9 V battery, Signal LED: signal (green)/ peak (yellow), Robust plastic housing, Dimensions: 80 x 42.5 x 133 mm, Suitable power adaptor available: Art. #367029# (not included)
Violectric HPA V202 is a headphone monitoring product.
Violectric HPA V222, Headphone Amplifier, Balanced headphone amplifier with 4 output stages, 50 Volts internal operating voltage - ideal for high-impedance headphones, High output power, for headphones with low impedances and magnetostats, +/- 18 dB pre-gain, 3500 mW Pmax at 50 Ohm, > 23 V RMS into 600 Ohm, Volume control with RK 27 potentiometer, Large 38 mm all-aluminium knob, Delayed switching of headphones after power-on, Integrated power supply, 2 Line inputs: XLR (L/R), 2 Line inputs: RCA (L/R), 1 Stereo headphone output: 4.4 mm Pentaconn balanced, 1 Stereo headphone output: 4-pin XLR balanced, 1 Stereo headphone output: 6.3 mm jack unbalanced, Dimensions (W x H x D): 170 x 65 x 252 mm, Weight: 3.1 kg
Violectric HPA V324, Headphone Amplifier, Analogue, balanced headphone amplifier with preamp function, Four power amplifiers for balanced playback (true-balanced technology), Two analogue stereo inputs: XLR and RCA, Pre Gain 6-stage switchable: -18dB / -12dB / -6dB / 0dB / +6dB / +12dB, Two illuminated, adjustable VU meters for level display, Remote volume control with ALPS RK27 motorised potentiometer, Delayed connection and immediate disconnection of the headphone outputs on power-on / off, Headphone and line-out can be selected separately, Frequency range: 5 - 150,000 Hz, Dynamic range: >131 dB (A-weighted), Output impedance: 0.3 ohm balanced / 0.15 ohm unbalanced, Input sensitivity: +6 dBu, Input impedance: 10 kOhm, Signal-to-noise ratio (SNR): < 102 dBu (A-weighted), Dimensions (W x H x D): 170 x 113 x 250 mm, Colour: Black anodised housing, Includes power cable and user manual@+*Connectors:*, One stereo line input: 3-pin XLR, balanced, One stereo line input: RCA, unbalanced, One stereo line output: 3-pin XLR, balanced, One stereo line output: RCA, unbalanced, Stereo headphone outputs: One 4-pin XLR, balanced, One Pentaconn 4.4 mm jack, balanced, One 6.3 mm jack, unbalanced, Power supply: 230 V - 115 V AC
Violectric HPA V550, Headphone Amplifier, With remote control for volume, mute, input selection, resampling and output selection, Motorised volume control, Balance control, 3 Analog stereo inputs: 2x RCA (unbalanced), 1x XLR (balanced), 18 +/- dB pre-gain for optimal adaptation to source and headphones, 4 Powerful amplifiers, 6400 mW Pmax at 50 Ohm, 21 V RMS at 600 Ohm, Monitoring of the headphone outputs for DC voltage and overload, Headphone and line-out can be selected separately, Headphone outputs: 1x jack (6.3 mm, unbalanced), 1x XLR (4-pin balanced), 1x Pentaconn (4.4 mm, balanced), Line Outs: 1x RCA L / R (unbalanced), 1x XLR L / R (balanced), 18 +/- dB line-out signal adjustment to downstream devices, 2 Toroidal transformers, Dimensions (W x H x D): 290 x 80 x 248 mm, Weight: approx. 6 kg, Colour: Black, Includes remote control and power cord
Violectric HPA V550 Pro, Headphone Amplifier, With 256-step relays for even finer tuning of volume levels, With remote control for volume, mute, input selection, resampling and output selection, Motorised volume control, Balance control, 3 Analogue stereo inputs: 2x Cinch unbalanced, 1x XLR balanced, Pre-gain +/-18 dB for optimal adaptation to source and headphones, 4 Powerful amplifiers, 6400 mW Pmax at 50 Ohm, 21V RMS at 600 Ohm, Monitoring of headphone outputs for DC voltage and overload, Headphone and line-out paths can be selected separately, Headphone outputs: 1x jack 6.3 mm, unbalanced, 1x XLR 4-pin balanced, 1x Pentaconn (4.4 mm, balanced), Line outputs: 1x RCA L/R unbalanced, 1x XLR L/R balanced, Line-out +/- 18dB signal adjustment to follow-on units, 2 Toroidal transformers, Dimensions (W x H x D): 290 x 80 x 248 mm, Weight: approx. 6 kg, Colour: Black, Incl. a remote control and mains cable
Benchmark HPA4 Black, Headphone Amplifier, Preamplifier with balanced and unbalanced inputs and outputs for high demands, With THX Achromatic Audio Amplifier (AAA) technology, For a realistic and fatigue-free listening experience, Precise 256-step fully balanced relay gain control in 0.5 dB steps, 100% Analogue, Touch screen for easy access to functions such as balance control, input level offset, input name, dim function, remote, etc., Headphone outputs: 1 x TRS (6.3 mm jack), 1 x XLR (4-pin), THD < -125 dB (0.00006 %), Signal-to-noise ratio: > 135 dB (A-weighted), Frequency response: -3 dB @ 0.1 Hz and 500 kHz, Output impedance: close to 0 Ohm, Max. output power: 6 W into 16 Ohm, Crosstalk: < -133 dB @ 1 kHz, -115 dB @ 10kHz (XLR4), Power requirement (nominal): 100 - 240 VAC, 50 - 60 Hz, Protection systems: DC and short-circuit detection, overcurrent, overvoltage and thermal protection, IR remote for control with optional Benchmark remote control (art. 501400 - not included in the delivery), Dimensions including feet (W x H x D): 22 x 10 x 21cm, Weight: approx. 3.7 kg, Colour: Black@+*Connections:*@+@+, 2x Stereo line input: balanced XLR, 2x Stereo line input: unbalanced, Cinch, 1x Stereo line output: balanced, XLR, 1x Stereo line output: unbalanced, RCA, 1x Mono sum output: balanced, XLR, 2x Bidirectional 12V trigger connections@+*Balanced Line Outputs:*@+@+, Distortion factor < -125 dB (0.00006%), Signal-to-noise ratio: 137 dB (A-weighted), Frequency response: -3 dB @ 0.1 Hz and 500 kHz, Output impedance: 60 Ohm, Maximum input and output voltage: 20 Vrms (+28 dBu), Crosstalk: < -133 dB @ 1 kHz, -116 dB @ 10 kHz
Roland HPD-20 Handsonic Pad, Electronic Percussion Pad, SuperNatural sound generating with 850 integrated sounds, Sound/ loops memory for importing 500 custom sounds, Built-in multi effects processor with EQ and ambience parameters, Ultrasensible velocity response over 13 silicone pads with damping, choke & tuner function, D-Beam control of sounds and effects, Recording with quick record function and export as a WAV audio file, USB connection Audio/ MIDI, Pad and hi-hat controller input, Suitable optional case: Art.#327322# (not included)
Lefima HPG 3.0 Chimes w Pedal 442Hz, Pedal Glockenspiel, Height adjustable, Range: f5 - f8, A = 442 Hz, Sound bar material: Alloy, Standard temperament: Werckmeister III, Weight: 16.5 kg, Model: KM-HPG-F1F4-442, Includes transport trolley
SPL HPm, Headphone monitoring amp with the Phonitor Matrix 500 module, Two separately adjustable headphone outputs, each with their own separate amplifier stages, Phase reversal of L and R channels, as well as stereo / mono / mute switching, Electronically balanced, Impedance: 10 kOhm, Max. input level: +21 dBu, Max. output level: +18 dBu @ 600 ohm, +15 dBu @ 300 ohm, +5 dBu @ 32 ohm, Frequency range: 10 - 10,000 Hz, Noise floor: -92.3 dBu (A-weighted), Total harmonic distortion (THD): 0.00024% (at an output level of 0 dBu and 600 ohm), 0 dBu = 0.775 V, Dual slot 500 series rack module, Weight: 0.8 kg
Behringer HPM1100-BK, Monitor Headphones, Wired, Closed-back design, Circumaural, Dynamic, Frequency range: 20 - 20,000 Hz, Impedance: 32 ohm, Max. sound pressure level: 96 dB, Driver size: 40 mm, Cable length: 2 m, Connector: 3.5 mm TRS jack, Colour: Black, Includes Adapter 3.5 mm to 6.3 mm
IMG Stageline HPR-6, Stereo Headphone Amplifier, Can also be used as a small power amplifier for 4-8 Ohm speaker systems, Stereo RCA input, 6.3 mm stereo jack output, Volume and balance controls, Metal housing, Frequency range: 19 - 40,000 Hz, Input signal: 110 mV - 4 V, Output signals: 2x 525 mW / 2x 1500 mW / 4 Ohm, 2x 330 mW / 2x 750 mW / 8 Ohm, 2x 114 mW / 2x 200 mW / 32 Ohm, Signal to noise ratio: 69 dB, Distortion factor 1%, Power supply via enclosed plug-in power supply, Dimensions: 120 x 68 x 36 mm, Weight: 288 g
Behringer HPS3000, Stereo Studio Headphones, Wider transmission area, Frequency response: 20 Hz - 20 kHz, Cobalt capsule with high efficiency, Capsule diameter: 40 mm, Sensitivity: 110 dB @ 1 kHz, Maximum input level: 100 mW, Impedance: 64 ohms, One-sided connection cable made of oxygen-free copper strands, Cable length: 2.0 m, Connection: 6.3 mm stereo connector, Optimized, oval auricles
XAOC Devices Hrad, Eurorack Module, Expander for Praga Mixer module (art. #444493# - not included), 4 CV inputs for Aux A/B, 2 Aux return volume controls, 4 Inserts for aux sends, Stereo main-out with volume control and level meter, Stereo headphone output with cue path and volume control, 4 Gate inputs for channel mute, Module output level switchable from Eurorack to line level, Power consumption: 50 mA (+12 V) / 35 mA (-12 V), Width: 10 U, Depth: 45 mm
Hearsafe HS 15 Twin Transparent, Professional 2-way in-ear stereo earphones, Specially for Elacin ear moulds, Dynamic, closed-back, Stereo jack (3.5 mm), 102 dB SPL, 24 - 17,000 Hz, 42 Ohms, Cable length: 140 cm, Incl. cable clip@+*Note: Especially suitable for bassists and drummers*
Hearsafe HS 15-2W, Professional 2 Way In-Ear Stereo Headphones, Especially suitable for Elacin earmolds, Dynamic, Closed, 119 dB SPL, Frequency range: 20 - 20,000 Hz, 32 Ohm, Stereo jack (3.5 mm), Colour: Transparent, Incl. Storage bag and a cable clip, Especially suitable for bassists and drummers