Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.
Behringer FBQ1502HD Ultragraph Pro, 2x 15 Band Graphic EQ, With FBQ Feedback Detection System audio analyser, Servo-balanced inputs and outputs with jack and XLR, Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz, Switchable Low-Cut, 4-Digit LED display and input level control, Illuminated faders, Design: 19" / 1U
Behringer FBQ2496 Feedback Destroyer, B-Stock with full warranty@+Feedback Destroyer ProThe FBQ2496 is the fastest (> 0.2 sec.) And the only 96 kHz feedback suppressor on the market. With its ultra-fast and intelligent feedback detection algorithm, it is capable of automatically locating up to 20 feedback frequencies per channel and suppressing them with extremely narrow notch filters, while the useful signal is virtually unaffected. @+@+The "Set-and-Forget" and panic buttons ensure a super-simple and instant feedback suppression. In Auto mode, the mix is ​​continuously monitored and filter settings adjusted automatically, while in manual mode, up to 40 fully parametric filters can be set, adjustable in frequency, bandwidth and boost / cut. An open MIDI architecture allows future software updates and flexible communication with digital equipment. With the different operating modes, you are able to react flexibly to different situations within the scope of the live application - but the FBQ2496 also offers a creative sound shaping tool in the studio.@+@+, Fully parametric filters, 2 Channel, Up to 20 feedback frequencies per channel, Ultra-fast feedback detection (> 0.2 sec), Auto / manual operation either, 24-bit / 96 kHz A / D and D / A converter, 32-bit DSP, MIDI interface, Up-date-able, Sym. (!) in / out jack, Power supply 100 V-240V, 19 "rack format with 1U
Behringer FBQ3102HD Ultragraph Pro, 2x 31-Band Graphic EQ with FBQ Feedback Detection System, Audio Analyzer, Low-noise operational amplifiers, Servo-balanced inputs and outputs with jack and XLR, Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz, Adjustable Low- and Hi-Cut, 12-Digit LED display for in - and output signal, Input level control, Hard bypass switch, Illuminated faders, Design: 19" / 2U
Behringer FBQ6200HD, 2x 31 Band Equalizer with Feedback Detector, Works as a feedback detector or as an audio analyser, Limiter, Pink noise generator, 2x XLR or 6.3mm jack input, 2x XLR or 6.3mm jack output, 1x XLR Mono sub output with X-Over frequency controller, Height: 3 U, Dimensions (H x W x D): 133 x 483 x 138 mm, Weight: 2.3 kg
Behringer FBQ800 V2, Graphic Equaliser, Compact 9.5" graphic equaliser for studio and live applications, FBQ feedback detection system, Can also be used as an audio analyser, Low-cut filter, Precise 6-segment LED input/output displays and level control for precise level indication, Illuminated faders, potentiometers and illuminated switches, Weight: 0.38 kg
Line6 FBV Express MKII, Original Footswitch, For Vetta, HD147, XT series, Flextone III, Spider IV / III, X3 series, POD II, POD HD, Amplifiers, Incl. RJ-45 cable
Line6 FBV2, 2-Way Footswitch, For Spider II, Spider III, Spider IV, Flextone III, Vetta, Vetta II, HD147, Duoverb, PODxt, PODxt Pro, Bass PODxt, Bass PODxt Pro and PODII 2006, Incl. RJ-45 cable
Yamaha FC 3A, Sustain Pedal, For stage pianos, synthesizers and keyboards, Half-pedal-able, Stereo jack, Cable length: 160 cm
Yamaha FC 4A, Pedal, N/C contact, Piano pedal form, Mono jack, Cable: 160 cm
Yamaha FC 5 Sustain Pedal, Sustain Pedal, For Yamaha synthesisers and keyboards, 1.5 m cable included, Well manufactured
Fryette FC-1A Footswitch for Cyclops, Footswitch, Suitable for the Fryette Cyclops A/B switcher for remote switching between amplifier and preamp
Fryette FC-3B Footsw for Power Station, 2-Way Footswitch, Suitable for Fryette Power Station, Switches the channel and the effect path
Fryette FC-3E Footsw for GPDI-IR, Two-Way Footswitch, Suitable for Fryette GPDI-IR, Switches more gain and GDPI active, Connector: 6.3 mm stereo jack
Yamaha FC-7, Expression Pedal, Controls e.g. volume, filter, effects intensity, For most Yamaha synthesizers and keyboards, Suitable for effect devices (e.g. for WahWah), Incl. 1.5 m cable
Flamma FC02 Reverb, Effect Pedal, Reverb, Three high-quality reverb effects: Studio, church, plate, Real bypass circuit, Power supply via 9 V mains adapter - not included in the delivery, Metal housing, Power consumption: 9 V, 130 mA
Flamma FC03 Delay is a guitar or bass effect.
Flamma FC05 Multi Modulation, Effect Pedal, Digital multi modulation effect, With 11 different algorithms, Power supply: 9 V, 130 mA
Flamma FC06 Distortion, Effect Pedal for Electric Guitar, Distortion pedal with ultra-wide dynamic range and exceptional, tube-like drive sound, 2 Modes: HP and LP, HP: High-Peak mode: boosts the bottom end - if you increase the distortion with the Drive control, you get more volume and a slight boost in the high-mid range around 3.5 kHz, LP: low-peak mode, colours the original sound extremely little, very nice for clean boosting, True Bypass, Power consumption: 9 -6 mA
Flamma FC07 Overdrive, Effect Pedal, Overdrive, With the legendary TS-style sound, 2 Modes: Warm and Hot, Warm: Recreates the sound of a classic tube amp with dynamic response and produces a natural and smooth overdrive tone, Hot: "tube warmth" sound and more gain for a crisper tone, Power consumption: 9V, 7mA
Drawmer FC1 FET Compressor, FET Compressor in 500-Series Module Format, Fully featured soft-knee FET compressor with short attack and release times, Stepped potentiometers, BIG and AIR modes for boosting low frequencies and enhancing clarity in the high-frequency range, Side-Chain-Link (via Pin 6), Built-in CRUSH function for harmonic saturation and added warmth, Wet/Dry mix for parallel compression, True bypass, Requires 1 500 Series slot, Dimensions: (W x H x D) 38 x 135 x 150 mm, Weight: 0.38 kg
Fishman FC1 Foot Controller, Footswitch for the Fishman TriplePlay, Large, easy-to-read LCD display with program name and number, 3 programmable foot-switches for program "up", "down" and "hold" (sustain), Integrated tuner, Plug 'n' Play USB Interface (no driver required), MIDI In / Out, 6.3 mm jack expression pedal input, 6.3 mm guitar input and output, TriplePlay battery status indicator, Includes 9V power adapter and USB cable
Flamma FC10 Gate, Effect Pedal for Electric Guitar, Compact noisegate pedal, Hard/soft mode options, True Bypass, Threshold control, Mode switch, On/Off-LED, Input and output: 6.3 mm mono jacks, Power consumption: 9 V, 26 mA, Dimensions (W x D x H): 47 x 83 x 52 mm
Flamma FC11 Envelope, Effect Pedal for Electric Guitar or Electric Bass, Compact analogue envelope/auto wah pedal, Controls: Sensitivity, Tone, Decay and Q, On/Off-LED, Input and output: 6.3 mm mono jacks, Power consumption: 9 V, 20 mA, Sturdy metal housing, Dimensions (W x D x H): 47 x 83 x 52 mm
Flamma FC12 Drum Machine, Effect Pedal, High-quality drum audio samples, 48 Drum grooves (pop, rock, funk, blues, metal, jazz), 6 Music types, each with 8 different rhythm types, Fill function, Tap-tempo, Dual-EQ Presets, LED button with display, Speeds: 40 and 240 RPM, Sample rate: 44.1 kHz / 24 bit, 6.3 mm Jack mono input for connecting guitars or other effects, 6.3 mm Jack mono output for connecting guitars or other effects, Power supply via 9 V DC power supply unit - centre negative (not included), Power consumption: 9 V, 210 mA, Dimensions (H x W x D): 47 x 83 x 52 mm, Weight: 153 g