Hardware

Explore recording, monitoring, and studio hardware. Compare published products, specifications, and community reviews before choosing equipment for your setup.

  • EP-40 Riddim Supertone

    Teenage Engineering EP-40 Riddim Supertone, Mobile Sampler, Sequencer and Composer, Built-in microphone and speaker, 128 MB System memory, 12 stereo / 16 mono voices, Subtractive synth engine for classic bass and lead sounds, Over 300 hand-picked instruments and sounds from renowned reggae producers, Grid-synced loops for precise performance, 9 projects with 80,000 notes each, 7 main effects and 12 punch-in effects, Pressure-sensitive buttons and multifunctional fader, Sampling frequency: 46 kHz / 16 Bit, 1x stereo In/Out: 3.5 mm jack, 1x Sync In/Out: 3,5 mm Klinke, 1 MIDI In/Out: 3.5 mm jack type A, 1 USB-C, Powered via 4 x AA batteries or USB-C port, Dimensions: 240 x 176 x 16 mm, Weight: 0.62 kg

  • EP-Pro

    Xotic EP-Pro, Effect Pedal for Electric Guitar, Booster, Analogue, True bypass, Controls: Volume, Gain, Treble, Bass, Boost On/Off, Adjustable pedal angle, Adjustable pedal resistance, Status LED on the rear (flashes when battery charge is <50%), Power supply: 9V battery or 9V DC power supply (not included, separately available power supply Art.#409939#), 2.1 mm barrel connector, polarity: (-) inside, (+) outside

  • EP2000 Europower

    Behringer EP2000 Europower, Power Amplifier, 2x 500 W @ 4 Ohm, 2x 350 W @ 8 Ohm, 2x 650 W @ 2 Ohm, Bridge mode 1x 2000 W @ 4 Ohm, 1x 1500 W @ 8 Ohm, Input: XLR and jack, Outputs: speaker twist and binding posts, Damping factor > 300 @ 8 Ohm, Dimensions (H x W x D): 88 x 483 x 402 mm, Size: 19"/ 2 HE, Weight: 15.7 kg

  • EP4000 Europower

    Behringer EP4000 Europower Power Amplifier, Power Amplifier, Power at 4 ohm: 2 x 950 W, Power at 8 ohm: 2 x 550 W, Power at 2 ohm: 2 x 1250 W, Power: 1 x 4000 W into 4 Ohm, 1 x 2800 W into 8 Ohm, Inputs: XLR + jack, Outputs: Speaker twist + speaker terminal, Damping factor: > 300 at 8 ohms, Dimensions (H x W x D): 88 x 483 x 402 mm, Format: 19"/ 2U, Weight: 16.6 kg

  • EP635 Fireball IR

    Engl EP635 Fireball IR, Effect Pedal for Electric Guitar, 2-Channel preamp with authentic Fireball sound, Independent channels with memorisable settings, Mid-boost, Noise gate, IR loader via USB-C for cabinet simulations, Headphone output, Controls: Volume, Gain, Bass, Middle, Treble, Presence, Switches: Channel, Mid-boost, Noise Gate, Input: 6.3 mm jack, Output: 6.3 mm jack, Headphone output: 3.5 mm jack, USB-C, Power supply: 9 V DC (300 mA, mains adapter not included), Dimensions (W x D x H): 65 x 55 x 118 mm, Weight: 0.32 kg, Colour: Red

  • EPM12

    Soundcraft EPM12, Small Mixer, 12 mono channels, 2 stereo channels, 3-band EQ with a swept mid on mono inputs, Insert per channel, 2 aux sends pre/post switchable, Solo/mute switch per channel, Dynamic peak LED per channel, L/R and monitor output, Separate routing for playback input, 48V phantom power, Integrated power supply, Dimensions: 432 x 363 x 91 mm, Weight: 5.8 kg, Includes rackmounts, Suitable case: Article no. #251219# (not included)

  • EPM6

    Soundcraft EPM6, Small Mixing Desk, 6 Mono channels, 2 Stereo channels, 3-Band EQ with tunable mids, Insert per channel, 2 Aux sends pre/post switchable, Solo/mute switch per channel, Dynamic peak LED per channel, L/R and monitor output, Separate routing for playback input, 48 V Phantom power, Integrated power supply, Dimensions: 280 x 363 x 91 mm, Weight: 4 kg, Suitable rackmounts: art.no #195067# (not included), Matching case: art.no #267782# (not included)

  • EPM8

    Soundcraft EPM8, Small Mixer, 3-Band EQ with a swept mid on mono inputs, Insert per channel, 2 Aux sends pre/post switchable, Solo/mute switch per channel, Dynamic peak LED per channel, L/R and monitor output, 48 V phantom power, Integrated power supply, Dimensions: 330 x 363 x 91 mm, Weight: 4.6 kg, Suitable case: art.#267783# (not included)

  • Epoch Boost

    Catalinbread Epoch Boost, Effects Pedal for Electric Guitar and Electric Bass, Preamp / buffer, Reproduction of the famous Maestro Echoplex EP-3 tape echo, Preamplifier circuit, The EP-3 has been used by numerous guitarists since the 1960s, with the preamp always on to add shine, headroom and clarity to the sound even when the echo is turned off, Up to 20 dB adjustable clean boost, The switchable Hi-Z input buffer prevents signal loss with long signal paths or large effect setups, Controls: preamp, boost, LED: Effect On, Footswitch: Effect bypass, Input 6.3 mm jack and output: 6.3 mm jack, True bypass, Power supply connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside, Current consumption: 15 mA, Power supply via 9 V DC power supply (not included - suitable power supply: Art.#409939#), Dimensions (W x D x H): 60 x 110 x 50 mm, Weight: 180 g, Made in USA@+*Note:* Battery operation is not supported

  • EPQ304 Europower

    Behringer EPQ304 Europower, Power Amplifier, Power: 4x 75 W an 4 Ω, 4x 50 W @ 8 Ω, Connections: Combi-Input XLR and jack, output speaker twist, Dampening factor > 220 at 8 Ω, This amplifier has a speed controlled cooling fan with right to left air flow, Dimensions: 49 x 482 x 265 mm, Body shape: 19", 1 U metal housing, Weight: 4 kg

  • EQ Deluxe Studio EQ & Drive

    Origin Effects EQ Deluxe Studio EQ & Drive, Effect Pedal for Electric Guitar and Electric Bass, Equalizer, Based on the legendary Pultec EQP-1A valve EQ from the 1950s, Known for its musical tone and subtle, warm tube saturation, Controls: Level, Bandwidth, Mid Boost, Gain, Low Boost, Low Cut, Mid Freq, High Cut, Buttons: Low Freq, High Freq, LED: Effect on, Footswitch: Effect bypass, Input and output: 6.3 mm jack, Power supply connection: barrel connector 5.5 x 2.1 mm, centre negative, Power supply via a 9 V DC mains adaptor (not included); suitable mains adaptor: Art. #409939#), Dimensions: (W x D x H): 108 x 135 x 90 mm, Weight: 740 g, Made in UK@+*Note:* Battery operation is not supported.

  • EQ-200 Graphic Eq

    Boss EQ-200 Graphic Eq, Effect pedal for electric guitar and electric bass, Stereo equaliser, 2x 10-band EQ - optionally parallel, serial or stereo, Stereo sound in 32 bit / 96 kHz studio quality, 4 Memory locations, LED display, Controls: 10 sliders 30 Hz-12.8 kHz, level, channel, memory, 2 Footswitches, 2 x 6.3 mm jack inputs (A / mono B), 2x 6.3 mm jack outputs (A / mono B), 6.3 mm jack input for external switches or expression pedal, MIDI, USB, Power supply with three AA batteries or 9 V DC mains adapter (not included - suitable mains adapter: Art.#409939#), Power consumption: 170 mA, Dimensions (W x D x H):101 x 138 x 63 mm, Weight: 630 g

  • EQ1

    Zähl EQ1, Parametric 4-Band Stereo EQ, API 500 format, Amplification range for all bands between +/- 5 dB and +/- 15 dB switchable, Treble: Frequency adjustable from 2 - 20 kHz, characteristic switchable Shelf / Bell, Mid-range: fully parametric, frequency adjustable from 600 Hz to 6 kHz, frequency range switchable to 1.8 - 18 kHz, Mid-range: fully parametric, frequency adjustable between 200 Hz - 2 kHz, frequency range switchable to 40 - 400 Hz, Depths: Frequency adjustable from 30 - 300 Hz, characteristic switchable Shelf / Bell, High pass filter adjustable from 25 to 250 Hz, Input impedance:> 30 kOhm, Output impedance: 50 ohms, Maximum level: +26 dBu, Reference level: +6 dBu / + 4 dBu, Power supply: +/- 15-17V, <250mA@+*Note:* Requires 500 rack with at least 2 empty slots.

  • EQ2-500

    MÄAG EQ2-500, 1-Channel 2-band equaliser 500 module, Frequency bands Q in red: 40 Hz, 65 Hz, 150 Hz, 250 Hz and 1 kHz, Frequency bands Q in white: Sub (10 Hz), 57 Hz, 88 Hz, 220, 400 and 1.4 kHz, Input attenuator with 0 dB up to -12 dB, Air band shelf equaliser settings: 2.5, 5, 10, 15, 20 and 40 kHz, air gain boost of the air band shelf equaliser up to +20 dB, Bypass switch, Format: 500 module

  • EQ4-500

    MÄAG EQ4-500, 1-Channel 6-Band Equaliser 500 Module, Frequency bands in the main section: Sub or 10 Hz, 40 Hz, 160 Hz, 650 Hz and the 2.5 kHz shelf EQ, boost/cut range of +15 dB and -4.5 dB with a centre position of 0 dB, Air band shelf equaliser settings: off, 2.5, 5, 10, 20 and 40 kHz, Air Gain Increase of the air band shelving equaliser by up to +20 dB, New hard-wired bypass circuit (identical to EQ4M), Bypass switch, Design: 500 Series module

  • EQ4M

    MÄAG EQ4M, 2 Channel 6-Band EQ, Four EQ bands (sub or 10 Hz, 40 Hz, 160 Hz, 650 Hz) with fixed frequency, a 2.5 kHz shelving equaliser and air-band equaliser with 2.5, 5, 10, 15, 20 and 40 kHz settings, Boost/cut range of +15 dB and -4.5 dB with a centre position of 0 dB, Bypass switch for each channel, Air-band section with its own bypass switch, 2 Line inputs: XLR, 2 Line outputs: XLR, Type: 19" 1 U

  • EQ700

    Behringer EQ700, Ultimate Graphic 7-band Equalizer@+Now you can use seven EQ tapes to refine your sound and remove feedback! This pedal is convincing with a frequency response of 100 Hz to 6.4 kHz and a generous 15 dB boost / cut. A status LED for effect activation and battery check is included. An electronic on / off switch ensures quiet switching. The power supply is via a 9-volt battery or a DC adapter (not included)., Floor / foot pedal, 7 EQ tapes to refine your sound and remove feedback, Wide frequency response from 100 Hz to 6.4 kHz with generous 15 dB boost / cut, Status LED for effect activation and battery check, Operation via 9-volt battery or Behringer PSU-SB DC power adapter (not included), Electronic on / off switch for silent switching

  • EQP-1 Green

    Tegeler EQP-1 Green, Passive Tube Equaliser, Green front panel, 2-channel dual mono tube EQ, Bass cut/boost (low shelf): 20 Hz, 30 Hz, 60 Hz, 100 Hz, High frequency boost (peak with adjustable bandwidth): 5 kHz, 6 kHz, 8 kHz, 10 kHz, 12 kHz, 16 kHz, High frequency attenuation: (Hi shelf) 5 kHz, 10 kHz, 20 kHz, High-quality input and output transformers, Bypass switch, Internal power supply, Balanced XLR inputs and outputs, Format: 19" / 2 U, Dimensions (W × H × D): 483 × 88.1 × 220 mm, Weight: 5.2 kg

  • EQP-WA GainMod

    Warm Audio EQP-WA GainMod, 1 Channel tube EQ, With gain modification for level adjustments of two devices, CineMag input and output transformer - made in the USA, Premium 12AX7 and 12AU7 tubes, CineMag inductor EQ section, The EQ section can be set to bypass while the signal is still running through the tubes and transformers, thus keeping the "warmth" of the tube, Transformer balanced inputs and outputs (XLR and jack), Linear frequency response from 20 – 50,000 Hz, Boost and cut can be used simultaneously to allow phase effects, Low frequency boost - 20, 30, 60, 100, 200, 400, 800 Hz - 12 dB, Low frequency cut - 20, 30, 60, 100, 200, 400, 800 Hz - 18 dB, High frequency boost - 3, 4, 5, 8, 10, 12, 16 kHz - 18 dB, High frequency cut - 3, 4, 5, 10, 20 kHz - 14 dB, 5 more additional frequency points than the EQP-1 A for greater versatility, Integrated 115 / 230 V IEC power supply, Dimensions: 19" / 2U

  • EQuator Equalizer

    Wampler EQuator Equalizer, Effect Pedal, Equaliser, Tailored to the needs of modern musicians, 2 Parametric center controls make it possible to precisely adjust the desired sound, High output to boost the amp preamp, Controls: Volume - Bass - Mid1 Level - Mid1 Freq - Mid2 Level - Mid2 Freq - Treble, LED: Effect On, Footswitch: Effect Bypass, Connections: Input (6.3 mm jack) - Output (6.3 mm jack) - Power supply connector (coaxial connection 5.5 x 2.1 mm - negative polarity inside), Power consumption: max. 31.9 mA, Power supply with a 9 V battery or a 9-18 V DC power supply (not included - suitable power supply: Art.#409939#), True bypass, Dimensions (W x D x H): 64 x 114 x 38 mm, Weight: 590 g, Made in USA@+*Note: no battery operation possible.*

  • ER90 Traditional

    Maton ER90C Traditional, Acoustic Guitar, Type: OM, Top: solid sitka spruce, Back and sides: solid rosewood, Neck: Mahogany, Multilayer purfling, Fingerboard and bridge: Ebony, Headstock with ebony veneer, White binding, Fingerboard radius: 304 mm, Scale: 648 mm, Nut width: 44.1 mm, 21 Jescar frets, Pickup system: Maton AP5 pro, Color: Natural Satin, Incl. Maton case, Made in Australia

  • ERA 1 black

    Hughes & Kettner ERA 1 black, Acoustic Amplifier, For acoustic guitar, classical guitar, accordion, strings, keyboard, zither etc., Four channels, Power: 250 Watts, Equipped with: 8" custom-made speaker + 1" dome tweeter, High resolution, Direct and unadulterated sound reproduction, Large headroom for a dynamic playing feel, Accurate mapping of the entire range of frequencies, Channels one and two are identical and can be used equally for two instruments or an instrument and vocals or two voices. Equipped with a high-resolution mic and instrument input (XLR/jack combo socket - switchable phantom power), Switches: -10 dB / Shape / Mute Gain Controller 3-band EQ with two modes (e.g. for steel string and nylon string), Channel-specific FX Engine with 16 programmes – reverbs, choruses, flangers, etc., Channel three: Aux In 3.5 mm stereo input adjustable for an external audio source, Channel four: FX Return 6.3 mm stereo input adjustable for devices with line level, Master section with controls for volume and notch filter for resonance suppression, Five outputs: (DI, Line, Tuner, Headphones, Digital Out S/PDIF Toslink), FX loop: 6.3 mm FX send, 35 mm pole mount, Weight: 10.75 kg, Dimensions (W x H x D): 351 x 285 x 290 mm, Colour: Black, Includes tilt stand (25° / 35°) and padded protective cover, Made in Germany

  • ERA 1 Wood

    Hughes & Kettner ERA 1 Wood, Acoustic Amplifier, For acoustic guitar, classical guitar, accordion, strings, keyboard, zither etc., Channels: 4, Power: 250 Watts, Equipped with: 8" custom-made speaker + 1" dome tweeter, High resolution, Direct and unadulterated sound reproduction, Large headroom for a dynamic playing feel, Accurate mapping of the entire range of frequencies, Channels 1 and 2 are identical and can be used equally for two instruments or an instrument and vocals or two voices. Equipped with a high-resolution mic and instrument input (XLR/jack combo socket - switchable phantom power), Switches: -10 dB / shape / mute gain controller 3-band EQ with two modes (e.g. for steel string and nylon string), Channel-specific FX engine with 16 programmes – reverbs, choruses, flangers, etc., Channel 3: Aux In 3.5 mm stereo input adjustable for an external audio source, Channel 4: FX Return 6.3 mm stereo input adjustable for devices with line level, Master section with controls for volume and notch filter for resonance suppression, 5 Outputs: (DI, Line, Tuner, Headphones, Digital Out S/PDIF Toslink), FX loop: 6.3 mm FX send, 35 mm pole mount, Weight: 10.75 kg, Dimensions (W x H x D): 351 x 285 x 290 mm, Colour: Natural Glazed, Includes tilt stand (25° / 35°) and padded protective cover, Made in Germany

  • Era 1x12 Cabinet

    Bad Cat Era 1x12 Cabinet, Speaker Cabinet for Electric Guitar, Equipped with: 1 x 12" Bad Cat Custom Celestion Vintage 30, Open cabinet construction, Housing Material: Birch plywood, Rear-loaded, Power rating: 60 W, Impedance: 8 Ohm, Black front cover, Stitched black leather strap handle, Connector: 6.3 mm jack, Dimensions: (W x H x D): 60.3 x 48.3 x 26 cm, Weight: 15.4 kg, Colour: Black, Made in USa